OID reference
1.3.6.1.4.1.207.8.33.7.1.1.4
This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds.
Identification
{1 3 6 1 4 1 207 8 33 7 1 1 4}
| Value | Name |
|---|---|
| 1 | portAutoSense |
| 2 | forceHalfDuplex-10M |
| 3 | forceHalfDuplex-100M |
| 4 | forceFullDuplex-10M |
| 5 | forceFullDuplex-100M |
| 6 | forceHalfDuplex-1G |
| 7 | forceFullDuplex-1G |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In AtiL2-MIB, the row index consists of these components in order:
atiL2DeviceId (INTEGER): one numeric subidentifier for the non-negative value.atiL2DevicePortNumber (INTEGER): one numeric subidentifier for the non-negative value.An instance has the form .1.3.6.1.4.1.207.8.33.7.1.1.4.<atiL2DeviceId>.<atiL2DevicePortNumber>. Use values present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.207.8.33.7.1.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
atiL2DevicePortAutosenseOrHalfDuplex OBJECT-TYPE
SYNTAX INTEGER {
portAutoSense(1),
forceHalfDuplex-10M(2),
forceHalfDuplex-100M(3),
forceFullDuplex-10M(4),
forceFullDuplex-100M(5),
forceHalfDuplex-1G(6),
forceFullDuplex-1G(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
configure whether this port can Autosense or Force
the Half Duplex or Full Duplex on different Port
Speeds."
::= { atiL2DevicePortEntry 4 }atiL2DevicePortAutosenseOrHalfDuplex OBJECT-TYPE
SYNTAX INTEGER {
portAutoSense(1),
forceHalfDuplex-10M(2),
forceHalfDuplex-100M(3),
forceFullDuplex-10M(4),
forceFullDuplex-100M(5),
forceHalfDuplex-1G(6),
forceFullDuplex-1G(7)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This attribute allows an administrative request to
configure whether this port can Autosense or Force
the Half Duplex or Full Duplex on different Port
Speeds."
::= { atiL2DevicePortEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: atiL2DevicePortAutosenseOrHalfDuplex
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"atiL2DevicePortAutosenseOrHalfDuplex",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"portAutoSense",
"(",
"1",
")",
",",
"forceHalfDuplex-10M",
"(",
"2",
")",
",",
"forceHalfDuplex-100M",
"(",
"3",
")",
",",
"forceFullDuplex-10M",
"(",
"4",
")",
",",
"forceFullDuplex-100M",
"(",
"5",
")",
",",
"forceHalfDuplex-1G",
"(",
"6",
")",
",",
"forceFullDuplex-1G",
"(",
"7",
")",
"}",
"ACCESS",
"read-write",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds.\"",
"::=",
"{",
"atiL2DevicePortEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"portAutoSense",
1
],
[
"forceHalfDuplex-10M",
2
],
[
"forceHalfDuplex-100M",
3
],
[
"forceFullDuplex-10M",
4
],
[
"forceFullDuplex-100M",
5
],
[
"forceHalfDuplex-1G",
6
],
[
"forceFullDuplex-1G",
7
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"This attribute allows an administrative request to configure whether this port can Autosense or Force the Half Duplex or Full Duplex on different Port Speeds."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: AtiL2-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Vendor MIB copy from the Observium Community archive.
Module: AtiL2-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises', 'Counter', 'IpAddress', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.33.7.1.1.1 | atiL2DeviceId | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.2 | atiL2DevicePortNumber | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.3 | atiL2DevicePortName | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.5 | atiL2DevicePortLinkState | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.6 | atiL2DevicePortDuplexStatus | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.7 | atiL2DevicePortSpeed | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.8 | atiL2DevicePortState | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.9 | atiL2DevicePortTransmitPacingConfig | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.10 | atiL2DevicePortSTPConfig | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.11 | atiL2DevicePortBridgeid | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.12 | atiL2DevicePortSTPCost | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.13 | atiL2DevicePortSTPPriority | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.14 | atiL2DevicePortFlowControlEnable | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.15 | atiL2DevicePortBackPressureEnable | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.16 | atiL2DevicePortVlanTagPriorityConfig | 0 | 0 | |
| 1.3.6.1.4.1.207.8.33.7.1.1.17 | atiL2DevicePortQOSPriorityConfig | 0 | 0 |