Description 1
The AT Setup MIB for managing the software installation and configuration files.
Sources for this description
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.207.8.4.4.4.500
The AT Setup MIB for managing the software installation and configuration files.
Identification
{1 3 6 1 4 1 207 8 4 4 4 500}
Available source records contain 2 distinct definitions; some records may not include a definition.
setup MODULE-IDENTITY
LAST-UPDATED "201404300000Z"
ORGANIZATION
"Allied Telesis, Inc."
CONTACT-INFO
"http://www.alliedtelesis.com"
DESCRIPTION
"The AT Setup MIB for managing the software installation and
configuration files."
REVISION "201404300000Z"
DESCRIPTION
"Updated decriptions to refer to chassisMappingTable"
REVISION "201310140000Z"
DESCRIPTION
"Added new requirement to the objects nextBootLastSetResult and backupLastSetResult,
as to check for the existence of a valid release license on the device. If a valid license
is not found then these objects will give an appropriate error message."
REVISION "201209210000Z"
DESCRIPTION
"Added chassis switch (e.g. SBx8100) descriptions to stack-related MIB objects"
REVISION "201011200000Z"
DESCRIPTION
"Addition of new objects to support system file operations on
stacked devices."
REVISION "201010080000Z"
DESCRIPTION
"Minor changes to help messages."
REVISION "201009100000Z"
DESCRIPTION
"Generic syntax tidy up."
REVISION "201009080000Z"
DESCRIPTION
"Added backupConfig object. The nextBootPath and bootcnfgPath objects will
now accept a file stored in card:. The nextBootPath object will only accept
a file on card if this is supported by the bootloader."
REVISION "201006150015Z"
DESCRIPTION
"MIB revision history dates in descriptions updated."
REVISION "201004090000Z"
DESCRIPTION
"A set to the runCnfgSaveAs object will now be immediately responded before
the actual saving operation starts. This prevents the request from being
timed out while the saving is still progressing. A new object
runCnfgSaveAsStatus is defined which can be polled to obtain the status of
the current/previous saving operation."
REVISION "200810020000Z"
DESCRIPTION
"Added support for obtaining GUI applet version information."
REVISION "200809300000Z"
DESCRIPTION
"Add branch serviceConfig."
REVISION "200809240000Z"
DESCRIPTION
"Moved file copy branch to the new AT-FILEv2 MIB.
Allowed clearing of currentFirmware, nextBootFirmware and nextBootConfig
by setting the path objects with an empty string."
REVISION "200805210000Z"
DESCRIPTION
"Initial revision."
::= { modules 500 }setup MODULE-IDENTITY
LAST-UPDATED "200810020000Z" -- October 2, 2008 at 00:00 GMT
ORGANIZATION
"Allied Telesis, Inc."
CONTACT-INFO
"http://www.alliedtelesis.com"
DESCRIPTION
"The AT Setup MIB for moving and copying files to and from the device
and managing the software installation and configuration files."
REVISION "200810020000Z" -- October 2, 2008 at 00:00 GMT
DESCRIPTION
"Added support for obtaining GUI applet version information."
REVISION "200809300000Z" -- September 30, 2008 at 00:00 GMT
DESCRIPTION
"Add branch serviceConfig "
REVISION "200809240000Z" -- September 24, 2008 at 00:00 GMT
DESCRIPTION
"Moved file copy branch to the new AT-FILEv2 MIB.
Allowed clearing of currentFirmware, nextBootFirmware and nextBootConfig
by setting the path objects with an empty string."
REVISION "200805210000Z" -- May 21, 2008 at 00:00 GMT
DESCRIPTION
"Initial revision."
::= { modules 500 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The AT Setup MIB for managing the software installation and configuration files.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Description 2
The AT Setup MIB for moving and copying files to and from the device and managing the software installation and configuration files.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: unspecified.
Names: setup
{
"smi_kind": "MODULE-IDENTITY",
"definition": [
"setup",
"MODULE-IDENTITY",
"LAST-UPDATED",
[
"literal",
"223230313430343330303030305a22"
],
"ORGANIZATION",
"\"Allied Telesis, Inc.\"",
"CONTACT-INFO",
"\"http://www.alliedtelesis.com\"",
"DESCRIPTION",
"\"The AT Setup MIB for managing the software installation and configuration files.\"",
"REVISION",
[
"literal",
"223230313430343330303030305a22"
],
"DESCRIPTION",
"\"Updated decriptions to refer to chassisMappingTable\"",
"REVISION",
[
"literal",
"223230313331303134303030305a22"
],
"DESCRIPTION",
"\"Added new requirement to the objects nextBootLastSetResult and backupLastSetResult, as to check for the existence of a valid release license on the device. If a valid license is not found then these objects will give an appropriate error message.\"",
"REVISION",
[
"literal",
"223230313230393231303030305a22"
],
"DESCRIPTION",
"\"Added chassis switch (e.g. SBx8100) descriptions to stack-related MIB objects\"",
"REVISION",
[
"literal",
"223230313031313230303030305a22"
],
"DESCRIPTION",
"\"Addition of new objects to support system file operations on stacked devices.\"",
"REVISION",
[
"literal",
"223230313031303038303030305a22"
],
"DESCRIPTION",
"\"Minor changes to help messages.\"",
"REVISION",
[
"literal",
"223230313030393130303030305a22"
],
"DESCRIPTION",
"\"Generic syntax tidy up.\"",
"REVISION",
[
"literal",
"223230313030393038303030305a22"
],
"DESCRIPTION",
"\"Added backupConfig object. The nextBootPath and bootcnfgPath objects will now accept a file stored in card:. The nextBootPath object will only accept a file on card if this is supported by the bootloader.\"",
"REVISION",
[
"literal",
"223230313030363135303031355a22"
],
"DESCRIPTION",
"\"MIB revision history dates in descriptions updated.\"",
"REVISION",
[
"literal",
"223230313030343039303030305a22"
],
"DESCRIPTION",
"\"A set to the runCnfgSaveAs object will now be immediately responded before the actual saving operation starts. This prevents the request from being timed out while the saving is still progressing. A new object runCnfgSaveAsStatus is defined which can be polled to obtain the status of the current/previous saving operation.\"",
"REVISION",
[
"literal",
"223230303831303032303030305a22"
],
"DESCRIPTION",
"\"Added support for obtaining GUI applet version information.\"",
"REVISION",
[
"literal",
"223230303830393330303030305a22"
],
"DESCRIPTION",
"\"Add branch serviceConfig.\"",
"REVISION",
[
"literal",
"223230303830393234303030305a22"
],
"DESCRIPTION",
"\"Moved file copy branch to the new AT-FILEv2 MIB. Allowed clearing of currentFirmware, nextBootFirmware and nextBootConfig by setting the path objects with an empty string.\"",
"REVISION",
[
"literal",
"223230303830353231303030305a22"
],
"DESCRIPTION",
"\"Initial revision.\"",
"::=",
"{",
"modules",
"500",
"}"
],
"syntax_tree": [
[
"LAST-UPDATED",
"201404300000Z"
],
[
"ORGANIZATION",
"Allied Telesis, Inc."
],
[
"CONTACT-INFO",
"http://www.alliedtelesis.com"
],
[
"DESCRIPTION",
"The AT Setup MIB for managing the software installation and configuration files."
],
[
"Revisions",
[
[
"201404300000Z",
[
"DESCRIPTION",
"Updated decriptions to refer to chassisMappingTable"
]
],
[
"201310140000Z",
[
"DESCRIPTION",
"Added new requirement to the objects nextBootLastSetResult and backupLastSetResult, as to check for the existence of a valid release license on the device. If a valid license is not found then these objects will give an appropriate error message."
]
],
[
"201209210000Z",
[
"DESCRIPTION",
"Added chassis switch (e.g. SBx8100) descriptions to stack-related MIB objects"
]
],
[
"201011200000Z",
[
"DESCRIPTION",
"Addition of new objects to support system file operations on stacked devices."
]
],
[
"201010080000Z",
[
"DESCRIPTION",
"Minor changes to help messages."
]
],
[
"201009100000Z",
[
"DESCRIPTION",
"Generic syntax tidy up."
]
],
[
"201009080000Z",
[
"DESCRIPTION",
"Added backupConfig object. The nextBootPath and bootcnfgPath objects will now accept a file stored in card:. The nextBootPath object will only accept a file on card if this is supported by the bootloader."
]
],
[
"201006150015Z",
[
"DESCRIPTION",
"MIB revision history dates in descriptions updated."
]
],
[
"201004090000Z",
[
"DESCRIPTION",
"A set to the runCnfgSaveAs object will now be immediately responded before the actual saving operation starts. This prevents the request from being timed out while the saving is still progressing. A new object runCnfgSaveAsStatus is defined which can be polled to obtain the status of the current/previous saving operation."
]
],
[
"200810020000Z",
[
"DESCRIPTION",
"Added support for obtaining GUI applet version information."
]
],
[
"200809300000Z",
[
"DESCRIPTION",
"Add branch serviceConfig."
]
],
[
"200809240000Z",
[
"DESCRIPTION",
"Moved file copy branch to the new AT-FILEv2 MIB. Allowed clearing of currentFirmware, nextBootFirmware and nextBootConfig by setting the path objects with an empty string."
]
],
[
"200805210000Z",
[
"DESCRIPTION",
"Initial revision."
]
]
]
]
]
}Vendor MIB copy from the LibreNMS archive.
Module: AT-SETUP-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TruthValue', 'TEXTUAL-CONVENTION'], 'AT-SMI-MIB': ['modules'], 'SNMPv2-SMI': ['Integer32', 'OBJECT-TYPE', 'MODULE-IDENTITY']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Netdisco archive.
Module: AT-SETUP-MIB
{'SNMPv2-TC': ['DisplayString', 'TruthValue', 'TEXTUAL-CONVENTION'], 'AT-SMI-MIB': ['modules'], 'SNMPv2-SMI': ['Integer32', 'OBJECT-TYPE', 'MODULE-IDENTITY']}Related source files and packages:
Status in source: unspecified.
Names: setup
{
"smi_kind": "MODULE-IDENTITY",
"definition": [
"setup",
"MODULE-IDENTITY",
"LAST-UPDATED",
[
"literal",
"223230303831303032303030305a22"
],
"ORGANIZATION",
"\"Allied Telesis, Inc.\"",
"CONTACT-INFO",
"\"http://www.alliedtelesis.com\"",
"DESCRIPTION",
"\"The AT Setup MIB for moving and copying files to and from the device and managing the software installation and configuration files.\"",
"REVISION",
[
"literal",
"223230303831303032303030305a22"
],
"DESCRIPTION",
"\"Added support for obtaining GUI applet version information.\"",
"REVISION",
[
"literal",
"223230303830393330303030305a22"
],
"DESCRIPTION",
"\"Add branch serviceConfig \"",
"REVISION",
[
"literal",
"223230303830393234303030305a22"
],
"DESCRIPTION",
"\"Moved file copy branch to the new AT-FILEv2 MIB. Allowed clearing of currentFirmware, nextBootFirmware and nextBootConfig by setting the path objects with an empty string.\"",
"REVISION",
[
"literal",
"223230303830353231303030305a22"
],
"DESCRIPTION",
"\"Initial revision.\"",
"::=",
"{",
"modules",
"500",
"}"
],
"syntax_tree": [
[
"LAST-UPDATED",
"200810020000Z"
],
[
"ORGANIZATION",
"Allied Telesis, Inc."
],
[
"CONTACT-INFO",
"http://www.alliedtelesis.com"
],
[
"DESCRIPTION",
"The AT Setup MIB for moving and copying files to and from the device and managing the software installation and configuration files."
],
[
"Revisions",
[
[
"200810020000Z",
[
"DESCRIPTION",
"Added support for obtaining GUI applet version information."
]
],
[
"200809300000Z",
[
"DESCRIPTION",
"Add branch serviceConfig"
]
],
[
"200809240000Z",
[
"DESCRIPTION",
"Moved file copy branch to the new AT-FILEv2 MIB. Allowed clearing of currentFirmware, nextBootFirmware and nextBootConfig by setting the path objects with an empty string."
]
],
[
"200805210000Z",
[
"DESCRIPTION",
"Initial revision."
]
]
]
]
]
}Vendor MIB copy from the Observium Community archive.
Module: AT-SETUP-MIB
See published definition above
{'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'AT-SMI-MIB': ['modules'], 'SNMPv2-SMI': ['Integer32', 'OBJECT-TYPE', 'MODULE-IDENTITY']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.500.1 | restartDevice | 0 | 0 | |
| 1.3.6.1.4.1.207.8.4.4.4.500.2 | firmware | 3 | 17 | |
| 1.3.6.1.4.1.207.8.4.4.4.500.3 | deviceConfiguration | 4 | 17 | |
| 1.3.6.1.4.1.207.8.4.4.4.500.4 | restartStkMemberDevice | 0 | 0 | |
| 1.3.6.1.4.1.207.8.4.4.4.500.5 | serviceConfig | 2 | 2 | |
| 1.3.6.1.4.1.207.8.4.4.4.500.6 | guiConfig | 1 | 3 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.207.8.4.4.4.23 | ethernet | 3 | 10 | This MIB file contains definitions of managed objects for the ethernet module. |
| 1.3.6.1.4.1.207.8.4.4.4.31 | flash | 14 | 15 | This MIB file contains definitions of managed objects for the FLASH module. |
| 1.3.6.1.4.1.207.8.4.4.4.36 | tty | 1 | 5 | This MIB file contains definitions of managed objects for the TTY module. |
| 1.3.6.1.4.1.207.8.4.4.4.37 | cc | 6 | 84 | This MIB file contains definitions of managed objects for the CC module. |
| 1.3.6.1.4.1.207.8.4.4.4.41 | bri | 2 | 14 | This MIB file contains definitions of managed objects for the BRI module. |
| 1.3.6.1.4.1.207.8.4.4.4.42 | pri | 2 | 15 | This MIB file contains definitions of managed objects for the PRI module. |
| 1.3.6.1.4.1.207.8.4.4.4.48 | loader | 2 | 9 | To handle upload, object loadStatus is upgraded, as well as the description for objects loadServer and loadFilename. |
| 1.3.6.1.4.1.207.8.4.4.4.49 | install | 8 | 34 | This MIB file contains definitions of managed objects for the INSTALL module. |
| 1.3.6.1.4.1.207.8.4.4.4.53 | trigger | 4 | 37 | This MIB file contains definitions of managed objects for the TRIGGER module. |
| 1.3.6.1.4.1.207.8.4.4.4.54 | atLoopProtect | 6 | 10 | |
| 1.3.6.1.4.1.207.8.4.4.4.56 | file | 2 | 10 | This MIB file contains definitions of managed objects for the FILE module. |
| 1.3.6.1.4.1.207.8.4.4.4.58 | ping | 4 | 27 | This MIB file contains definitions of managed objects for the PING module. |
| 1.3.6.1.4.1.207.8.4.4.4.70 | dhcp | 4 | 27 | This MIB file contains definitions of managed objects for the DHCP module. |
| 1.3.6.1.4.1.207.8.4.4.4.77 | firewall | 3 | 11 | This MIB file contains definitions of managed objects for the FIREWALL module. |
| 1.3.6.1.4.1.207.8.4.4.4.87 | swi | 6 | 67 | This MIB file contains definitions of managed objects for the SWITCH module. |
| 1.3.6.1.4.1.207.8.4.4.4.97 | pim4 | 2 | 7 | Contains definitions of managed objects for the handling PIM4 enterprise functions on AT switches. |
| 1.3.6.1.4.1.207.8.4.4.4.99 | qos | 1 | 59 | This MIB file contains definitions of managed objects for the handling QoS on Allied Telesis switches. There are a number of tabl… |
| 1.3.6.1.4.1.207.8.4.4.4.104 | lb | 6 | 56 | This MIB file contains definitions of managed objects for the LB module. |
| 1.3.6.1.4.1.207.8.4.4.4.109 | ds3, ds3module | 2 | 8 | This MIB file contains definitions of managed objects for the DS3 module. |
| 1.3.6.1.4.1.207.8.4.4.4.118 | portAuth | 1 | 81 | Description of atrDot1xUnauthenticated is modified. |
| 1.3.6.1.4.1.207.8.4.4.4.120 | stack | 8 | 20 | This MIB file contains definitions of managed objects for the handling of stacking Allied Telesis switches. |
| 1.3.6.1.4.1.207.8.4.4.4.136 | epsr | 2 | 13 | Convert epsrEventVariables into a table entry, so variable of mutiple EPSR domains can be obtained. |
| 1.3.6.1.4.1.207.8.4.4.4.139 | igmp | 3 | 51 | |
| 1.3.6.1.4.1.207.8.4.4.4.140 | pvstpm | 2 | 9 | The MIB module for managing PVSTPM enterprise functionality on Allied Telesis switches. |
| 1.3.6.1.4.1.207.8.4.4.4.143 | dosDefense | 5 | 20 | |
| 1.3.6.1.4.1.207.8.4.4.4.501 | atDns | 1 | 8 | |
| 1.3.6.1.4.1.207.8.4.4.4.502 | atNtp | 4 | 33 | |
| 1.3.6.1.4.1.207.8.4.4.4.503 | atQosv2 | 2 | 5 | |
| 1.3.6.1.4.1.207.8.4.4.4.504 | atPtpMIB | 3 | 178 | |
| 1.3.6.1.4.1.207.8.4.4.4.536 | atEpsrv2 | 3 | 21 | |
| 1.3.6.1.4.1.207.8.4.4.4.537 | atDhcpsn | 3 | 22 | |
| 1.3.6.1.4.1.207.8.4.4.4.550 | atUdld | 2 | 4 | |
| 1.3.6.1.4.1.207.8.4.4.4.600 | atFilev2 | 7 | 65 | |
| 1.3.6.1.4.1.207.8.4.4.4.601 | log | 4 | 16 | |
| 1.3.6.1.4.1.207.8.4.4.4.602 | atIpMib | 1 | 9 | |
| 1.3.6.1.4.1.207.8.4.4.4.603 | atmf | 5 | 51 | |
| 1.3.6.1.4.1.207.8.4.4.4.604 | atG8032v2 | 2 | 8 | |
| 1.3.6.1.4.1.207.8.4.4.4.605 | atUfo | 2 | 8 | |
| 1.3.6.1.4.1.207.8.4.4.4.606 | atLinkMon | 5 | 45 |