Status in source: current.
Names: fsEoamTraceOption
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsEoamTraceOption",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object is used to enable trace statements in Ethernat OAM module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a particular trace level. The mapping between the bit positions & the trace level is as follows: Bit 0 - Init and Shutdown traces Bit 1 - Management traces Bit 2 - Data Path traces Bit 3 - Control Plane traces Bit 4 - Packet Dump traces Bit 5 - Traces related to all resources except buffers Bit 6 - All Failure traces Bit 7 - Buffer allocation/release traces Bit 16 - EOAM Function Entry traces Bit 17 - EOAM Function Exit traces Bit 18 - EOAM Critical traces Bit 19 - EOAM Discovery traces Bit 20 - EOAM Remote loopback traces Bit 21 - EOAM Link monitoring module traces Bit 22 - EOAM MIB variable req/response traces Bit 23 - EOAM Remote Failure Indication traces Bit 24 - EOAM Multiplexer / Parser traces Bit 25 - EOAM Redundancy traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 19 and 20 are set, then the trace statement related to discovery and remote loopback related messages will be printed. The user has to enter the corresponding integer value for the bits set. For example if bits 8 and 9 are to be set ,then user has to give the value 0x300.\"",
"DEFVAL",
"{",
"'",
"00040000",
"'",
"H",
"}",
"::=",
"{",
"fsEoamSystem",
"5",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object is used to enable trace statements in Ethernat OAM module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer represents a particular trace level. The mapping between the bit positions & the trace level is as follows: Bit 0 - Init and Shutdown traces Bit 1 - Management traces Bit 2 - Data Path traces Bit 3 - Control Plane traces Bit 4 - Packet Dump traces Bit 5 - Traces related to all resources except buffers Bit 6 - All Failure traces Bit 7 - Buffer allocation/release traces Bit 16 - EOAM Function Entry traces Bit 17 - EOAM Function Exit traces Bit 18 - EOAM Critical traces Bit 19 - EOAM Discovery traces Bit 20 - EOAM Remote loopback traces Bit 21 - EOAM Link monitoring module traces Bit 22 - EOAM MIB variable req/response traces Bit 23 - EOAM Remote Failure Indication traces Bit 24 - EOAM Multiplexer / Parser traces Bit 25 - EOAM Redundancy traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 19 and 20 are set, then the trace statement related to discovery and remote loopback related messages will be printed. The user has to enter the corresponding integer value for the bits set. For example if bits 8 and 9 are to be set ,then user has to give the value 0x300."
],
null,
null,
null,
[
"DEFVAL",
"'00040000'H"
]
]
}