OID reference

fsMplsRsvpTeGenDebugFlag

1.3.6.1.4.1.2076.13.2.2.15

Description

This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the three least significant nibbles correspond to the various Log Types. A log of specific type in a routine is displayed when the bits corresponding to the module …

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.2076.13.2.2 (fsMplsRsvpTeGenObjects)
Node code
15
Node name
fsMplsRsvpTeGenDebugFlag
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.2076.13.2.2.15
URN notation
urn:oid:1.3.6.1.4.1.2076.13.2.2.15
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 2076 13 2 2 15}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 fsMplsRsvpTeMIB(2) fsMplsRsvpTeGenObjects(2) fsMplsRsvpTeGenDebugFlag(15)}
OID-IRI notation
  • /1/3/6/1/4/1/2076/13/2/2/15
  • /ISO/Identified-Organization/6/1/4/1/2076/13/2/2/15
  • /ISO/3/6/1/4/1/2076/13/2/2/15
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/identified-organization/dod/internet/private/enterprises/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/identified-organization/dod/internet/private/vendor-objects/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/org/dod/internet/private/enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/org/dod/internet/private/enterprises/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/org/dod/internet/private/ldap-enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/org/dod/internet/private/vendor-objects/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-identified-organization/dod/internet/private/enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-identified-organization/dod/internet/private/enterprises/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-identified-organization/dod/internet/private/ldap-enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-identified-organization/dod/internet/private/vendor-objects/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-organization/dod/internet/private/enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-organization/dod/internet/private/enterprises/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-organization/dod/internet/private/ldap-enterprise/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag
  • /iso/iso-organization/dod/internet/private/vendor-objects/2076/13/fsMplsRsvpTeMIB/fsMplsRsvpTeGenObjects/fsMplsRsvpTeGenDebugFlag

SNMP properties

Value type
Unsigned32
Maximum access defined by MIB
read-write
Status in MIB
current
Default value
0

Using this OID with SNMP

At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.

snmpget [connection options] DEVICE .1.3.6.1.4.1.2076.13.2.2.15.0

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

fsMplsRsvpTeGenDebugFlag · current

fsMplsRsvpTeGenDebugFlag OBJECT-TYPE
        SYNTAX        Unsigned32
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION
            "This is a 4-byte (32-bit) object with each bit enabling/
             disabling the debug message.
             Five most significant nibbles correspond to the routine identity
             and the three least significant nibbles correspond to the various
             Log Types.
             A log of specific type in a routine is displayed when the
             bits corresponding to the module and the log type are both
             set to 1.
             The various bit patterns corresponding to the routine and the log
             type are as follows:

             ROUTINE:
             0100 0000 0000 0000 0000 - GR       - Rsvpte Graceful Restart routines
             0010 0000 0000 0000 0000 - MAIN     - Rsvpte main routines
             0001 0000 0000 0000 0000 - IF       - Interface with other module
                                                   routines(IF, IPIF, PM_TCIF)
             0000 1000 0000 0000 0000 - PVM      - Packet Validation Module
                                                   routines
             0000 0100 0000 0000 0000 - PB       - Packet Builder Module
                                                   routines
             0000 0010 0000 0000 0000 - PH       - Path Handler routines
             0000 0001 0000 0000 0000 - RH       - Resv Handler routines
             0000 0000 1000 0000 0000 - PE       - Path Error routines
             0000 0000 0100 0000 0000 - RE       - Path Tear routines
             0000 0000 0010 0000 0000 - REH      - Resv Error routines
             0000 0000 0001 0000 0000 - RTH      - Resv Tear routines
             0000 0000 0000 1000 0000 - RCH      - Resv Conf routines
             0000 0000 0000 0100 0000 - HH       - Hello Handler routines
             0000 0000 0000 0010 0000 - LLVL     - Low Level routines
             0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines
             0000 0000 0000 0000 1000 - PORT     - Porting routines
             0000 0000 0000 0000 0100 - DIFF     - Diff Serv module routines
             0000 0000 0000 0000 0010 - RR       - Refresh OverHead Reduction
                                                   module routines
             0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie
                                                   module routines
             
             LOG TYPES:
             0000 0000 0001 - MEM   - Memory related logs
             0000 0000 0010 - PRCS  - Process related logs
             0000 0000 0100 - MISC  - Miscellaneous logs
             0000 0000 1000 - ETEXT - Function Entry and Exit logs
             0000 0001 0000 - SCSS  - Low level sucess logs
             0000 0010 0000 - FAIL  - Low level failure logs
             
             The default value will be bit pattern corresponding to all logs of
             Rsvpte main routines."
        DEFVAL        { 0 }
        ::=           { fsMplsRsvpTeGenObjects 15 }

fsMplsRsvpTeGenDebugFlag · current

fsMplsRsvpTeGenDebugFlag OBJECT-TYPE
        SYNTAX        Unsigned32
        MAX-ACCESS    read-write
        STATUS        current
        DESCRIPTION
            "This is a 4-byte (32-bit) object with each bit enabling/
             disabling the debug message.
             Five most significant nibbles correspond to the routine identity
             and the three least significant nibbles correspond to the various
             Log Types.
             A log of specific type in a routine is displayed when the
             bits corresponding to the module and the log type are both
             set to 1.
             The various bit patterns corresponding to the routine and the log
             type are as follows:

             ROUTINE:
             0010 0000 0000 0000 0000 - MAIN     - Rsvpte main routines
             0001 0000 0000 0000 0000 - IF       - Interface with other module
                                                   routines(IF, IPIF, PM_TCIF)
             0000 1000 0000 0000 0000 - PVM      - Packet Validation Module
                                                   routines
             0000 0100 0000 0000 0000 - PB       - Packet Builder Module
                                                   routines
             0000 0010 0000 0000 0000 - PH       - Path Handler routines
             0000 0001 0000 0000 0000 - RH       - Resv Handler routines
             0000 0000 1000 0000 0000 - PE       - Path Error routines
             0000 0000 0100 0000 0000 - RE       - Path Tear routines
             0000 0000 0010 0000 0000 - REH      - Resv Error routines
             0000 0000 0001 0000 0000 - RTH      - Resv Tear routines
             0000 0000 0000 1000 0000 - RCH      - Resv Conf routines
             0000 0000 0000 0100 0000 - HH       - Hello Handler routines
             0000 0000 0000 0010 0000 - LLVL     - Low Level routines
             0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines
             0000 0000 0000 0000 1000 - PORT     - Porting routines
             0000 0000 0000 0000 0100 - DIFF     - Diff Serv module routines
             0000 0000 0000 0000 0010 - RR       - Refresh OverHead Reduction
                                                   module routines
             0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie
                                                   module routines
             
             LOG TYPES:
             0000 0000 0001 - MEM   - Memory related logs
             0000 0000 0010 - PRCS  - Process related logs
             0000 0000 0100 - MISC  - Miscellaneous logs
             0000 0000 1000 - ETEXT - Function Entry and Exit logs
             0000 0001 0000 - SCSS  - Low level sucess logs
             0000 0010 0000 - FAIL  - Low level failure logs
             
             The default value will be bit pattern corresponding to all logs of
             Rsvpte main routines."
        DEFVAL        { 0 }
        ::=           { fsMplsRsvpTeGenObjects 15 }

Meaning

Descriptions

2 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Description 1

This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the three least significant nibbles correspond to the various Log Types. A log of specific type in a routine is displayed when the bits corresponding to the module and the log type are both set to 1. The various bit patterns corresponding to the routine and the log type are as follows: ROUTINE: 0100 0000 0000 0000 0000 - GR - Rsvpte Graceful Restart routines 0010 0000 0000 0000 0000 - MAIN - Rsvpte main routines 0001 0000 0000 0000 0000 - IF - Interface with other module routines(IF, IPIF, PM_TCIF) 0000 1000 0000 0000 0000 - PVM - Packet Validation Module routines 0000 0100 0000 0000 0000 - PB - Packet Builder Module routines 0000 0010 0000 0000 0000 - PH - Path Handler routines 0000 0001 0000 0000 0000 - RH - Resv Handler routines 0000 0000 1000 0000 0000 - PE - Path Error routines 0000 0000 0100 0000 0000 - RE - Path Tear routines 0000 0000 0010 0000 0000 - REH - Resv Error routines 0000 0000 0001 0000 0000 - RTH - Resv Tear routines 0000 0000 0000 1000 0000 - RCH - Resv Conf routines 0000 0000 0000 0100 0000 - HH - Hello Handler routines 0000 0000 0000 0010 0000 - LLVL - Low Level routines 0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines 0000 0000 0000 0000 1000 - PORT - Porting routines 0000 0000 0000 0000 0100 - DIFF - Diff Serv module routines 0000 0000 0000 0000 0010 - RR - Refresh OverHead Reduction module routines 0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie module routines LOG TYPES: 0000 0000 0001 - MEM - Memory related logs 0000 0000 0010 - PRCS - Process related logs 0000 0000 0100 - MISC - Miscellaneous logs 0000 0000 1000 - ETEXT - Function Entry and Exit logs 0000 0001 0000 - SCSS - Low level sucess logs 0000 0010 0000 - FAIL - Low level failure logs The default value will be bit pattern corresponding to all logs of Rsvpte main routines.

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

See 1 matching source record

Description 2

This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the three least significant nibbles correspond to the various Log Types. A log of specific type in a routine is displayed when the bits corresponding to the module and the log type are both set to 1. The various bit patterns corresponding to the routine and the log type are as follows: ROUTINE: 0010 0000 0000 0000 0000 - MAIN - Rsvpte main routines 0001 0000 0000 0000 0000 - IF - Interface with other module routines(IF, IPIF, PM_TCIF) 0000 1000 0000 0000 0000 - PVM - Packet Validation Module routines 0000 0100 0000 0000 0000 - PB - Packet Builder Module routines 0000 0010 0000 0000 0000 - PH - Path Handler routines 0000 0001 0000 0000 0000 - RH - Resv Handler routines 0000 0000 1000 0000 0000 - PE - Path Error routines 0000 0000 0100 0000 0000 - RE - Path Tear routines 0000 0000 0010 0000 0000 - REH - Resv Error routines 0000 0000 0001 0000 0000 - RTH - Resv Tear routines 0000 0000 0000 1000 0000 - RCH - Resv Conf routines 0000 0000 0000 0100 0000 - HH - Hello Handler routines 0000 0000 0000 0010 0000 - LLVL - Low Level routines 0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines 0000 0000 0000 0000 1000 - PORT - Porting routines 0000 0000 0000 0000 0100 - DIFF - Diff Serv module routines 0000 0000 0000 0000 0010 - RR - Refresh OverHead Reduction module routines 0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie module routines LOG TYPES: 0000 0000 0001 - MEM - Memory related logs 0000 0000 0010 - PRCS - Process related logs 0000 0000 0100 - MISC - Miscellaneous logs 0000 0000 1000 - ETEXT - Function Entry and Exit logs 0000 0001 0000 - SCSS - Low level sucess logs 0000 0010 0000 - FAIL - Low level failure logs The default value will be bit pattern corresponding to all logs of Rsvpte main routines.

Sources for this description

Belden, GarrettCom and Hirschmann IT official standalone MIBs

See 1 matching source record

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 record · 1 source

Description 1

fsMplsRsvpTeGenDebugFlag · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: fsMplsRsvpTeGenDebugFlag

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "fsMplsRsvpTeGenDebugFlag",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the three least significant nibbles correspond to the various Log Types. A log of specific type in a routine is displayed when the bits corresponding to the module and the log type are both set to 1. The various bit patterns corresponding to the routine and the log type are as follows: ROUTINE: 0100 0000 0000 0000 0000 - GR - Rsvpte Graceful Restart routines 0010 0000 0000 0000 0000 - MAIN - Rsvpte main routines 0001 0000 0000 0000 0000 - IF - Interface with other module routines(IF, IPIF, PM_TCIF) 0000 1000 0000 0000 0000 - PVM - Packet Validation Module routines 0000 0100 0000 0000 0000 - PB - Packet Builder Module routines 0000 0010 0000 0000 0000 - PH - Path Handler routines 0000 0001 0000 0000 0000 - RH - Resv Handler routines 0000 0000 1000 0000 0000 - PE - Path Error routines 0000 0000 0100 0000 0000 - RE - Path Tear routines 0000 0000 0010 0000 0000 - REH - Resv Error routines 0000 0000 0001 0000 0000 - RTH - Resv Tear routines 0000 0000 0000 1000 0000 - RCH - Resv Conf routines 0000 0000 0000 0100 0000 - HH - Hello Handler routines 0000 0000 0000 0010 0000 - LLVL - Low Level routines 0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines 0000 0000 0000 0000 1000 - PORT - Porting routines 0000 0000 0000 0000 0100 - DIFF - Diff Serv module routines 0000 0000 0000 0000 0010 - RR - Refresh OverHead Reduction module routines 0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie module routines LOG TYPES: 0000 0000 0001 - MEM - Memory related logs 0000 0000 0010 - PRCS - Process related logs 0000 0000 0100 - MISC - Miscellaneous logs 0000 0000 1000 - ETEXT - Function Entry and Exit logs 0000 0001 0000 - SCSS - Low level sucess logs 0000 0010 0000 - FAIL - Low level failure logs The default value will be bit pattern corresponding to all logs of Rsvpte main routines.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "fsMplsRsvpTeGenObjects",
    "15",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the three least significant nibbles correspond to the various Log Types. A log of specific type in a routine is displayed when the bits corresponding to the module and the log type are both set to 1. The various bit patterns corresponding to the routine and the log type are as follows: ROUTINE: 0100 0000 0000 0000 0000 - GR - Rsvpte Graceful Restart routines 0010 0000 0000 0000 0000 - MAIN - Rsvpte main routines 0001 0000 0000 0000 0000 - IF - Interface with other module routines(IF, IPIF, PM_TCIF) 0000 1000 0000 0000 0000 - PVM - Packet Validation Module routines 0000 0100 0000 0000 0000 - PB - Packet Builder Module routines 0000 0010 0000 0000 0000 - PH - Path Handler routines 0000 0001 0000 0000 0000 - RH - Resv Handler routines 0000 0000 1000 0000 0000 - PE - Path Error routines 0000 0000 0100 0000 0000 - RE - Path Tear routines 0000 0000 0010 0000 0000 - REH - Resv Error routines 0000 0000 0001 0000 0000 - RTH - Resv Tear routines 0000 0000 0000 1000 0000 - RCH - Resv Conf routines 0000 0000 0000 0100 0000 - HH - Hello Handler routines 0000 0000 0000 0010 0000 - LLVL - Low Level routines 0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines 0000 0000 0000 0000 1000 - PORT - Porting routines 0000 0000 0000 0000 0100 - DIFF - Diff Serv module routines 0000 0000 0000 0000 0010 - RR - Refresh OverHead Reduction module routines 0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie module routines LOG TYPES: 0000 0000 0001 - MEM - Memory related logs 0000 0000 0010 - PRCS - Process related logs 0000 0000 0100 - MISC - Miscellaneous logs 0000 0000 1000 - ETEXT - Function Entry and Exit logs 0000 0001 0000 - SCSS - Low level sucess logs 0000 0010 0000 - FAIL - Low level failure logs The default value will be bit pattern corresponding to all logs of Rsvpte main routines."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}
Records for description 2Belden, GarrettCom and Hirschmann IT official standalone MIBs1 record · 1 source

Description 2

fsMplsRsvpTeGenDebugFlag · currentBelden, GarrettCom and Hirschmann IT official standalone MIBs1 source

Status in source: current.

Names: fsMplsRsvpTeGenDebugFlag

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "fsMplsRsvpTeGenDebugFlag",
    "OBJECT-TYPE",
    "SYNTAX",
    "Unsigned32",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the three least significant nibbles correspond to the various Log Types. A log of specific type in a routine is displayed when the bits corresponding to the module and the log type are both set to 1. The various bit patterns corresponding to the routine and the log type are as follows: ROUTINE: 0010 0000 0000 0000 0000 - MAIN - Rsvpte main routines 0001 0000 0000 0000 0000 - IF - Interface with other module routines(IF, IPIF, PM_TCIF) 0000 1000 0000 0000 0000 - PVM - Packet Validation Module routines 0000 0100 0000 0000 0000 - PB - Packet Builder Module routines 0000 0010 0000 0000 0000 - PH - Path Handler routines 0000 0001 0000 0000 0000 - RH - Resv Handler routines 0000 0000 1000 0000 0000 - PE - Path Error routines 0000 0000 0100 0000 0000 - RE - Path Tear routines 0000 0000 0010 0000 0000 - REH - Resv Error routines 0000 0000 0001 0000 0000 - RTH - Resv Tear routines 0000 0000 0000 1000 0000 - RCH - Resv Conf routines 0000 0000 0000 0100 0000 - HH - Hello Handler routines 0000 0000 0000 0010 0000 - LLVL - Low Level routines 0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines 0000 0000 0000 0000 1000 - PORT - Porting routines 0000 0000 0000 0000 0100 - DIFF - Diff Serv module routines 0000 0000 0000 0000 0010 - RR - Refresh OverHead Reduction module routines 0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie module routines LOG TYPES: 0000 0000 0001 - MEM - Memory related logs 0000 0000 0010 - PRCS - Process related logs 0000 0000 0100 - MISC - Miscellaneous logs 0000 0000 1000 - ETEXT - Function Entry and Exit logs 0000 0001 0000 - SCSS - Low level sucess logs 0000 0010 0000 - FAIL - Low level failure logs The default value will be bit pattern corresponding to all logs of Rsvpte main routines.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "fsMplsRsvpTeGenObjects",
    "15",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "Unsigned32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This is a 4-byte (32-bit) object with each bit enabling/ disabling the debug message. Five most significant nibbles correspond to the routine identity and the three least significant nibbles correspond to the various Log Types. A log of specific type in a routine is displayed when the bits corresponding to the module and the log type are both set to 1. The various bit patterns corresponding to the routine and the log type are as follows: ROUTINE: 0010 0000 0000 0000 0000 - MAIN - Rsvpte main routines 0001 0000 0000 0000 0000 - IF - Interface with other module routines(IF, IPIF, PM_TCIF) 0000 1000 0000 0000 0000 - PVM - Packet Validation Module routines 0000 0100 0000 0000 0000 - PB - Packet Builder Module routines 0000 0010 0000 0000 0000 - PH - Path Handler routines 0000 0001 0000 0000 0000 - RH - Resv Handler routines 0000 0000 1000 0000 0000 - PE - Path Error routines 0000 0000 0100 0000 0000 - RE - Path Tear routines 0000 0000 0010 0000 0000 - REH - Resv Error routines 0000 0000 0001 0000 0000 - RTH - Resv Tear routines 0000 0000 0000 1000 0000 - RCH - Resv Conf routines 0000 0000 0000 0100 0000 - HH - Hello Handler routines 0000 0000 0000 0010 0000 - LLVL - Low Level routines 0000 0000 0000 0001 0000 - UTL_STAT - Utl and Stat routines 0000 0000 0000 0000 1000 - PORT - Porting routines 0000 0000 0000 0000 0100 - DIFF - Diff Serv module routines 0000 0000 0000 0000 0010 - RR - Refresh OverHead Reduction module routines 0000 0000 0000 0000 0001 - MIH_TRIE - Message Id Handler and Trie module routines LOG TYPES: 0000 0000 0001 - MEM - Memory related logs 0000 0000 0010 - PRCS - Process related logs 0000 0000 0100 - MISC - Miscellaneous logs 0000 0000 1000 - ETEXT - Function Entry and Exit logs 0000 0001 0000 - SCSS - Low level sucess logs 0000 0010 0000 - FAIL - Low level failure logs The default value will be bit pattern corresponding to all logs of Rsvpte main routines."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2076)

Division Products

Siblings (37)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.2076.13.2.2.1 fsMplsRsvpTeLsrID00
1.3.6.1.4.1.2076.13.2.2.2 fsMplsRsvpTeMaxTnls00
1.3.6.1.4.1.2076.13.2.2.3 fsMplsRsvpTeMaxErhopsPerTnl00
1.3.6.1.4.1.2076.13.2.2.4 fsMplsRsvpTeMaxActRoutePerTnl00
1.3.6.1.4.1.2076.13.2.2.5 fsMplsRsvpTeMaxIfaces00
1.3.6.1.4.1.2076.13.2.2.6 fsMplsRsvpTeMaxNbrs00
1.3.6.1.4.1.2076.13.2.2.7 fsMplsRsvpTeSockSupprtd00
1.3.6.1.4.1.2076.13.2.2.8 fsMplsRsvpTeHelloSupprtd00
1.3.6.1.4.1.2076.13.2.2.9 fsMplsRsvpTeHelloIntervalTime00
1.3.6.1.4.1.2076.13.2.2.10 fsMplsRsvpTeRRCapable00
1.3.6.1.4.1.2076.13.2.2.11 fsMplsRsvpTeMsgIdCapable00
1.3.6.1.4.1.2076.13.2.2.12 fsMplsRsvpTeRMDPolicyObject00
1.3.6.1.4.1.2076.13.2.2.13 fsMplsRsvpTeGenLblSpaceMinLbl00
1.3.6.1.4.1.2076.13.2.2.14 fsMplsRsvpTeGenLblSpaceMaxLbl00
1.3.6.1.4.1.2076.13.2.2.16 fsMplsRsvpTeGenPduDumpLevel00
1.3.6.1.4.1.2076.13.2.2.17 fsMplsRsvpTeGenPduDumpMsgType00
1.3.6.1.4.1.2076.13.2.2.18 fsMplsRsvpTeGenPduDumpDirection00
1.3.6.1.4.1.2076.13.2.2.19 fsMplsRsvpTeOperStatus00
1.3.6.1.4.1.2076.13.2.2.20 fsMplsRsvpTeOverRideOption00
1.3.6.1.4.1.2076.13.2.2.21 fsMplsRsvpTeMinTnlsWithMsgId00
1.3.6.1.4.1.2076.13.2.2.22 fsMplsRsvpTeNotificationEnabled00
1.3.6.1.4.1.2076.13.2.2.23 fsMplsRsvpTeNotifyMsgRetransmitIntvl00
1.3.6.1.4.1.2076.13.2.2.24 fsMplsRsvpTeNotifyMsgRetransmitDecay00
1.3.6.1.4.1.2076.13.2.2.25 fsMplsRsvpTeNotifyMsgRetransmitLimit00
1.3.6.1.4.1.2076.13.2.2.26 fsMplsRsvpTeAdminStatusTimeIntvl00
1.3.6.1.4.1.2076.13.2.2.27 fsMplsRsvpTePathStateRemovedSupport00
1.3.6.1.4.1.2076.13.2.2.28 fsMplsRsvpTeLabelSetEnabled00
1.3.6.1.4.1.2076.13.2.2.29 fsMplsRsvpTeAdminStatusCapability00
1.3.6.1.4.1.2076.13.2.2.30 fsMplsRsvpTeGrCapability00
1.3.6.1.4.1.2076.13.2.2.31 fsMplsRsvpTeGrRecoveryPathCapability00
1.3.6.1.4.1.2076.13.2.2.32 fsMplsRsvpTeGrRestartTime00
1.3.6.1.4.1.2076.13.2.2.33 fsMplsRsvpTeGrRecoveryTime00
1.3.6.1.4.1.2076.13.2.2.34 fsMplsRsvpTeGrProgressStatus00
1.3.6.1.4.1.2076.13.2.2.35 fsMplsRsvpTeReoptimizeTime00
1.3.6.1.4.1.2076.13.2.2.36 fsMplsRsvpTeEroCacheTime00
1.3.6.1.4.1.2076.13.2.2.37 fsMplsRsvpTeReoptLinkMaintenance00
1.3.6.1.4.1.2076.13.2.2.38 fsMplsRsvpTeReoptNodeMaintenance00