Status in source: current.
Names: fsMplsFrrFacProtected
Technical details
{
"smi_kind": "NOTIFICATION-TYPE",
"definition": [
"fsMplsFrrFacProtected",
"NOTIFICATION-TYPE",
"OBJECTS",
"{",
"fsMplsTunnelExtFacRouteDBProtTunStatus",
",",
"fsMplsTunnelExtFacRouteDBProtTunResvBw",
"}",
"STATUS",
"current",
"DESCRIPTION",
"\"This notification is generated when a tunnel running over an interface as specified in the fsMplsFrrConstTable is initially protected by the backup tunnel also specified in the fsMplsFrrConstTable. In some implementations there may be a difference between when the control plane triggers this notification and when the hardware is programmed to utilize the protection path. Due to the urgency of this operation, it is acceptable for the control plane to either issue this notification before or after it programs the hardware. In cases where it is the latter approach, the notification MUST be sent immediately after the data plane has been altered. This notification should not be generated for each subsequent tunnel that is backed up by the FRR feature on this LSR, as this may result in potential scaling issues with regard to LSR performance and network loading. Note this notification only applicable to the facility based fastreroute protection method, and should be ignored by implementations that do not support this method.\"",
"::=",
"{",
"fsMplsFrrNotif",
"1",
"}"
],
"syntax_tree": [
[
"Objects",
[
"fsMplsTunnelExtFacRouteDBProtTunStatus",
"fsMplsTunnelExtFacRouteDBProtTunResvBw"
]
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This notification is generated when a tunnel running over an interface as specified in the fsMplsFrrConstTable is initially protected by the backup tunnel also specified in the fsMplsFrrConstTable. In some implementations there may be a difference between when the control plane triggers this notification and when the hardware is programmed to utilize the protection path. Due to the urgency of this operation, it is acceptable for the control plane to either issue this notification before or after it programs the hardware. In cases where it is the latter approach, the notification MUST be sent immediately after the data plane has been altered. This notification should not be generated for each subsequent tunnel that is backed up by the FRR feature on this LSR, as this may result in potential scaling issues with regard to LSR performance and network loading. Note this notification only applicable to the facility based fastreroute protection method, and should be ignored by implementations that do not support this method."
],
null
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: ARICENT-MPLS-FRR-MIB
See published definition above
Module imports
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'TimeInterval', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'NOTIFICATION-TYPE', 'enterprises', 'Gauge32'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsTunnelInstanceIndex', 'MplsLsrIdentifier', 'MplsBitRate', 'MplsLabel', 'MplsTunnelAffinity', 'MplsExtendedTunnelId'], 'MPLS-TE-STD-MIB': ['mplsTunnelEntry', 'mplsTunnelARHopListIndex', 'mplsTunnelARHopIndex', 'mplsTunnelIndex', 'mplsTunnelInstance', 'mplsTunnelIngressLSRId', 'mplsTunnelEgressLSRId'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}
Related source files and packages:
- Belden, GarrettCom and Hirschmann IT official standalone MIBs
· Publisher's source file: fsmpfrr.mib
Module: ARICENT-MPLS-FRR-MIB
Same published definition
Module imports
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'TimeInterval', 'RowStatus'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'NOTIFICATION-TYPE', 'enterprises', 'Gauge32'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsTunnelInstanceIndex', 'MplsLsrIdentifier', 'MplsBitRate', 'MplsLabel', 'MplsTunnelAffinity', 'MplsExtendedTunnelId'], 'MPLS-TE-STD-MIB': ['mplsTunnelEntry', 'mplsTunnelARHopListIndex', 'mplsTunnelARHopIndex', 'mplsTunnelIndex', 'mplsTunnelInstance', 'mplsTunnelIngressLSRId', 'mplsTunnelEgressLSRId'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress']}
Related source files and packages: