OID reference
1.3.6.1.4.1.2076.13.5.2.2.2
The compliance statement for agents that provide read only support for PW MIB Module. Such devices can then be monitored but cannot be configured using this MIB module.
Identification
{1 3 6 1 4 1 2076 13 5 2 2 2}
The displayed source records contain one distinct definition. Compare its source records.
pwModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that provide read
only support for PW MIB Module. Such devices can
then be monitored but cannot be configured using this
MIB module."
MODULE -- this module
MANDATORY-GROUPS { pwBasicGroup
}
GROUP pwNotificationGroup
DESCRIPTION "This group is only mandatory for those
implementations
which can efficiently implement the notifications
contained in this group."
GROUP pwPwIdGroup
DESCRIPTION "This group is only mandatory for implementations
that support the PW ID FEC.
"
GROUP pwGeneralizedFecGroup
DESCRIPTION "This group is only mandatory for implementations
that support the generalized PW FEC.
"
GROUP pwFcsGroup
DESCRIPTION "This group is only mandatory for implementations
that support FCS retention."
GROUP pwFragGroup
DESCRIPTION "This group is only mandatory for implementations
that support PW fragmentation.
"
GROUP pwPwStatusGroup
DESCRIPTION "This group is only mandatory for implementations
that support PW status notification.
"
GROUP pwGetNextGroup
DESCRIPTION "This group is only mandatory for implementations
where the pwIndex may be any arbitary value
and the EMS would require retrieval of the next
free index."
GROUP pwPriorityGroup
DESCRIPTION "This group is only mandatory for implementations
that support the controling the PW setup and
holding priority."
GROUP pwAttachmentGroup
DESCRIPTION "This group is only mandatory for implementations
that support attachment of two PWs (PW stitching)."
GROUP pwPeformance1DayIntervalGroup
DESCRIPTION "This group is only mandatory for implementations
that support PW performance gathering in 1 Day
intervals."
GROUP pwPerformanceIntervalGeneralGroup
DESCRIPTION "This group is only mandatory for implementations
that support PW performance gathering in 15
minutes intervals."
GROUP pwPeformanceIntervalGroup
DESCRIPTION "This group is only mandatory for implementations
that support PW performance gathering in 15
minutes intervals."
GROUP pwHCPeformanceIntervalGroup
DESCRIPTION "This group is only mandatory for implementations
where at least one of the interval performance
counters wraps around too quickly based on the
criteria specified in RFC 2863 for high-capacity
counters."
GROUP pwMappingTablesGroup
DESCRIPTION "This group is only mandatory for implementations
that support reverse mapping of PW indexes to
the pwIndex and the peer mapping table."
GROUP pwNotificationControlGroup
DESCRIPTION "This group is only mandatory for implementations
that support the PW notifications."
OBJECT pwType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwOwner
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwPsnType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwSetUpPriority
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwHoldingPriority
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwPeerAddrType
SYNTAX InetAddressType { unknown(0), ipv4(1) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required. Only unknown(0) and
ipv4(1) is required."
OBJECT pwPeerAddr
SYNTAX InetAddress (SIZE(0|4))
MIN-ACCESS read-only
DESCRIPTION "Write access is not required. An implementation
is only required to support 0, 4 address sizes."
OBJECT pwAttachedPwIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwIfIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwLocalGroupID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwGroupAttachmentID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwLocalAttachmentID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwPeerAttachmentID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwCwPreference
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwLocalIfMtu
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwLocalIfString
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwLocalCapabAdvert
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwFragmentCfgSize
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwFcsRetentioncfg
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwOutboundLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwInboundLabel
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwName
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwDescr
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwAdminStatus
SYNTAX INTEGER { up(1), down(2) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required. The support of value
testing(3) is not required."
OBJECT pwOperStatus
SYNTAX INTEGER { up(1), down(2), notPresent(6),
lowerLayerDown(7) }
DESCRIPTION "The support of the values testing(3), unknown(4),
and is not required."
OBJECT pwRowStatus
SYNTAX RowStatus { active(1) }
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwUpDownNotifEnable
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwDeletedNotifEnable
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
OBJECT pwNotifRate
MIN-ACCESS read-only
DESCRIPTION "Write access is not required."
::= { pwCompliances 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The compliance statement for agents that provide read only support for PW MIB Module. Such devices can then be monitored but cannot be configured using this MIB module.
Belden, GarrettCom and Hirschmann IT official standalone MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: pwModuleReadOnlyCompliance
{
"smi_kind": "MODULE-COMPLIANCE",
"definition": [
"pwModuleReadOnlyCompliance",
"MODULE-COMPLIANCE",
"STATUS",
"current",
"DESCRIPTION",
"\"The compliance statement for agents that provide read only support for PW MIB Module. Such devices can then be monitored but cannot be configured using this MIB module.\"",
"MODULE",
"MANDATORY-GROUPS",
"{",
"pwBasicGroup",
"}",
"GROUP",
"pwNotificationGroup",
"DESCRIPTION",
"\"This group is only mandatory for those implementations which can efficiently implement the notifications contained in this group.\"",
"GROUP",
"pwPwIdGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support the PW ID FEC. \"",
"GROUP",
"pwGeneralizedFecGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support the generalized PW FEC. \"",
"GROUP",
"pwFcsGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support FCS retention.\"",
"GROUP",
"pwFragGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support PW fragmentation. \"",
"GROUP",
"pwPwStatusGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support PW status notification. \"",
"GROUP",
"pwGetNextGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations where the pwIndex may be any arbitary value and the EMS would require retrieval of the next free index.\"",
"GROUP",
"pwPriorityGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support the controling the PW setup and holding priority.\"",
"GROUP",
"pwAttachmentGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support attachment of two PWs (PW stitching).\"",
"GROUP",
"pwPeformance1DayIntervalGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support PW performance gathering in 1 Day intervals.\"",
"GROUP",
"pwPerformanceIntervalGeneralGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support PW performance gathering in 15 minutes intervals.\"",
"GROUP",
"pwPeformanceIntervalGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support PW performance gathering in 15 minutes intervals.\"",
"GROUP",
"pwHCPeformanceIntervalGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations where at least one of the interval performance counters wraps around too quickly based on the criteria specified in RFC 2863 for high-capacity counters.\"",
"GROUP",
"pwMappingTablesGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support reverse mapping of PW indexes to the pwIndex and the peer mapping table.\"",
"GROUP",
"pwNotificationControlGroup",
"DESCRIPTION",
"\"This group is only mandatory for implementations that support the PW notifications.\"",
"OBJECT",
"pwType",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwOwner",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwPsnType",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwSetUpPriority",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwHoldingPriority",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwPeerAddrType",
"SYNTAX",
"InetAddressType",
"{",
"unknown",
"(",
"0",
")",
",",
"ipv4",
"(",
"1",
")",
"}",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. Only unknown(0) and ipv4(1) is required.\"",
"OBJECT",
"pwPeerAddr",
"SYNTAX",
"InetAddress",
"(",
"SIZE",
"(",
"0",
"|",
"4",
")",
")",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. An implementation is only required to support 0, 4 address sizes.\"",
"OBJECT",
"pwAttachedPwIndex",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwIfIndex",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwID",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwLocalGroupID",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwGroupAttachmentID",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwLocalAttachmentID",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwPeerAttachmentID",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwCwPreference",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwLocalIfMtu",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwLocalIfString",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwLocalCapabAdvert",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwFragmentCfgSize",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwFcsRetentioncfg",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwOutboundLabel",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwInboundLabel",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwName",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwDescr",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwAdminStatus",
"SYNTAX",
"INTEGER",
"{",
"up",
"(",
"1",
")",
",",
"down",
"(",
"2",
")",
"}",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. The support of value testing(3) is not required.\"",
"OBJECT",
"pwOperStatus",
"SYNTAX",
"INTEGER",
"{",
"up",
"(",
"1",
")",
",",
"down",
"(",
"2",
")",
",",
"notPresent",
"(",
"6",
")",
",",
"lowerLayerDown",
"(",
"7",
")",
"}",
"DESCRIPTION",
"\"The support of the values testing(3), unknown(4), and is not required.\"",
"OBJECT",
"pwRowStatus",
"SYNTAX",
"RowStatus",
"{",
"active",
"(",
"1",
")",
"}",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwStorageType",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwUpDownNotifEnable",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwDeletedNotifEnable",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"OBJECT",
"pwNotifRate",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required.\"",
"::=",
"{",
"pwCompliances",
"2",
"}"
],
"syntax_tree": [
[
"Status",
"current"
],
[
"DESCRIPTION",
"The compliance statement for agents that provide read only support for PW MIB Module. Such devices can then be monitored but cannot be configured using this MIB module."
],
null,
[
"ComplianceModules",
[
[
null,
[
"pwBasicGroup",
"pwNotificationGroup",
"pwPwIdGroup",
"pwGeneralizedFecGroup",
"pwFcsGroup",
"pwFragGroup",
"pwPwStatusGroup",
"pwGetNextGroup",
"pwPriorityGroup",
"pwAttachmentGroup",
"pwPeformance1DayIntervalGroup",
"pwPerformanceIntervalGeneralGroup",
"pwPeformanceIntervalGroup",
"pwHCPeformanceIntervalGroup",
"pwMappingTablesGroup",
"pwNotificationControlGroup"
]
]
]
]
]
}Module: PW-STD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['TruthValue', 'RowStatus', 'StorageType', 'TimeStamp'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'TimeTicks', 'transmission', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'IANA-PWE3-MIB': ['IANAPwTypeTC', 'IANAPwPsnTypeTC'], 'PW-TC-STD-MIB': ['PwIndexType', 'PwGroupID', 'PwIDType', 'PwOperStatusTC', 'PwAttachmentIdentifierType', 'PwCwStatusTC', 'PwCapabilities', 'PwStatus', 'PwFragSize', 'PwFragStatus'], 'PerfHist-TC-MIB': ['PerfCurrentCount', 'PerfIntervalCount'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress'], 'HC-PerfHist-TC-MIB': ['HCPerfCurrentCount', 'HCPerfIntervalCount', 'HCPerfTimeElapsed', 'HCPerfValidIntervals'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2076.13.5.2.2.1 | pwModuleFullCompliance | 0 | 0 |