OID reference

pwMplsMplsType

1.3.6.1.4.1.2076.13.6.1.1.1.1

Description

Set by the operator to indicate the outer tunnel types, if exists. mplsTe(0) is used if the outer tunnel was set-up by MPLS-TE, and mplsNonTe(1) is used the outer tunnel was set up by LDP or manually. Combination of mplsTe(0) and mplsNonTe(1) may exist together. pwOnly(2) is used if there is no outer tunnel label, i.e…

Full description and source information

Identification

Identifier and names

Parent: 1.3.6.1.4.1.2076.13.6.1.1.1 (pwMplsEntry)
Node code: 1
Node name: pwMplsMplsType
Category: SNMP management object
Numeric OID: 1.3.6.1.4.1.2076.13.6.1.1.1.1
URN notation: urn:oid:1.3.6.1.4.1.2076.13.6.1.1.1.1

ASN.1, OID-IRI and named path variants

ASN.1 notation

{1 3 6 1 4 1 2076 13 6 1 1 1 1}

{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}
{iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) 2076 13 pwMplsStdMIB(6) pwMplsObjects(1) pwMplsTable(1) pwMplsEntry(1) pwMplsMplsType(1)}

OID-IRI notation

/1/3/6/1/4/1/2076/13/6/1/1/1/1
/ISO/Identified-Organization/6/1/4/1/2076/13/6/1/1/1/1
/ISO/3/6/1/4/1/2076/13/6/1/1/1/1

Named path variants

/iso/identified-organization/dod/internet/private/enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/identified-organization/dod/internet/private/enterprises/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/identified-organization/dod/internet/private/ldap-enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/identified-organization/dod/internet/private/vendor-objects/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/org/dod/internet/private/enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/org/dod/internet/private/enterprises/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/org/dod/internet/private/ldap-enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/org/dod/internet/private/vendor-objects/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-identified-organization/dod/internet/private/enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-identified-organization/dod/internet/private/enterprises/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-identified-organization/dod/internet/private/ldap-enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-identified-organization/dod/internet/private/vendor-objects/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-organization/dod/internet/private/enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-organization/dod/internet/private/enterprises/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-organization/dod/internet/private/ldap-enterprise/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType
/iso/iso-organization/dod/internet/private/vendor-objects/2076/13/pwMplsStdMIB/pwMplsObjects/pwMplsTable/pwMplsEntry/pwMplsMplsType

SNMP properties

Value type: BITS
Maximum access defined by MIB: read-write
Status in MIB: current

Bit values

Bit position	Name
0	mplsTe
1	mplsNonTe
2	pwOnly

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.

Published row index: pwIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2076.13.6.1.1.1.1

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Published definition

The displayed source records contain one distinct definition. Compare its source records.

pwMplsMplsType OBJECT-TYPE   
     SYNTAX   BITS {  
         mplsTe    (0),  
         mplsNonTe (1),  
         pwOnly    (2)  
              }  
     MAX-ACCESS    read-write  
     STATUS        current  
     DESCRIPTION  
          "Set by the operator to indicate the outer tunnel types, if  
           exists. mplsTe(0) is used if the outer tunnel was set-up   
           by MPLS-TE, and mplsNonTe(1) is used the outer tunnel was   
           set up by LDP or manually. Combination of mplsTe(0) and   
           mplsNonTe(1) may exist together.  
           pwOnly(2) is used if there is no outer tunnel label, i.e.  
           in static provisioning without MPLS tunnel. pwOnly(2)  
           cannot be combined with mplsNonTe(1) or mplsTe(0)."  
     DEFVAL { { mplsNonTe } }  
     ::= { pwMplsEntry 1 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

Sources for this description

Belden, GarrettCom and Hirschmann IT official standalone MIBs

See 1 matching source record

Evidence

Source records

1 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Belden, GarrettCom and Hirschmann IT official standalone MIBs1 record · 1 source

Description 1

pwMplsMplsType · currentBelden, GarrettCom and Hirschmann IT official standalone MIBs1 source

Status in source: current.

Names: pwMplsMplsType

Technical details

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "pwMplsMplsType",
    "OBJECT-TYPE",
    "SYNTAX",
    "BITS",
    "{",
    "mplsTe",
    "(",
    "0",
    ")",
    ",",
    "mplsNonTe",
    "(",
    "1",
    ")",
    ",",
    "pwOnly",
    "(",
    "2",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Set by the operator to indicate the outer tunnel types, if exists. mplsTe(0) is used if the outer tunnel was set-up by MPLS-TE, and mplsNonTe(1) is used the outer tunnel was set up by LDP or manually. Combination of mplsTe(0) and mplsNonTe(1) may exist together. pwOnly(2) is used if there is no outer tunnel label, i.e. in static provisioning without MPLS tunnel. pwOnly(2) cannot be combined with mplsNonTe(1) or mplsTe(0).\"",
    "DEFVAL",
    "{",
    "{",
    "mplsNonTe",
    "}",
    "}",
    "::=",
    "{",
    "pwMplsEntry",
    "1",
    "}"
  ],
  "syntax_tree": [
    [
      "BITS",
      [
        [
          "mplsTe",
          0
        ],
        [
          "mplsNonTe",
          1
        ],
        [
          "pwOnly",
          2
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Set by the operator to indicate the outer tunnel types, if exists. mplsTe(0) is used if the outer tunnel was set-up by MPLS-TE, and mplsNonTe(1) is used the outer tunnel was set up by LDP or manually. Combination of mplsTe(0) and mplsNonTe(1) may exist together. pwOnly(2) is used if there is no outer tunnel label, i.e. in static provisioning without MPLS tunnel. pwOnly(2) cannot be combined with mplsNonTe(1) or mplsTe(0)."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      [
        "BitNames",
        [
          "mplsNonTe"
        ]
      ]
    ]
  ]
}

Belden, GarrettCom and Hirschmann IT official standalone MIBs · Publisher's source file: stdpwm.mib

Module: PW-MPLS-STD-MIB

See published definition above

Module imports

{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['StorageType'], 'PW-STD-MIB': ['pwIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'transmission', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'PW-TC-STD-MIB': ['PwIndexType'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'MPLS-LSR-STD-MIB': ['MplsIndexType']}

· Download stdpwm.mib

Related source files and packages:

Firmware > Magnum 5RX_10RX > 5RX_10RX MIB — 10RX_mibs.zip

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.2076)

Division Products

Siblings (7)

OID	Name	Direct children	Descendants	Description
1.3.6.1.4.1.2076.13.6.1.1.1.2	pwMplsExpBitsMode	0	0
1.3.6.1.4.1.2076.13.6.1.1.1.3	pwMplsExpBits	0	0
1.3.6.1.4.1.2076.13.6.1.1.1.4	pwMplsTtl	0	0
1.3.6.1.4.1.2076.13.6.1.1.1.5	pwMplsLocalLdpID	0	0
1.3.6.1.4.1.2076.13.6.1.1.1.6	pwMplsLocalLdpEntityID	0	0
1.3.6.1.4.1.2076.13.6.1.1.1.7	pwMplsPeerLdpID	0	0
1.3.6.1.4.1.2076.13.6.1.1.1.8	pwMplsStorageType	0	0