OID reference
1.3.6.1.4.1.2076.13.6.2.2.2
The compliance statement for agents that provide read only support for PW-MPLS MIB Module. Such devices can then be monitored but cannot be configured using this MIB module.
Identification
{1 3 6 1 4 1 2076 13 6 2 2 2}
The displayed source records contain one distinct definition. Compare its source records.
pwMplsModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents that provide read
only support for PW-MPLS MIB Module. Such devices can
then be monitored but cannot be configured using this
MIB module."
MODULE -- this module
MANDATORY-GROUPS { pwMplsGroup,
pwMplsOutboundMainGroup,
pwMplsInboundGroup,
pwMplsMappingGroup
}
GROUP pwMplsOutboundTeGroup
DESCRIPTION "This group MUST be supported if the implementation
allows MPLS TE tunnels to carry PW traffic.
"
OBJECT pwMplsMplsType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
Support of pwOnly(2) is not required. At least one
of mplsTe(0) or mplsNonTe(1) MUST be supported if
signaling of PW is supported.
"
OBJECT pwMplsExpBitsMode
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
Support of specifiedValue(2) and
serviceDependant(3)
is optional.
"
OBJECT pwMplsExpBits
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsTtl
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsLocalLdpID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsLocalLdpEntityID
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsStorageType
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsOutboundLsrXcIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
A value other than zero MUST be supported if the
implementation support non TE signaling of the
outer tunnel.
"
OBJECT pwMplsOutboundTunnelIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsOutboundTunnelLclLSR
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsOutboundTunnelPeerLSR
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
"
OBJECT pwMplsOutboundIfIndex
MIN-ACCESS read-only
DESCRIPTION "Write access is not required.
A value other than zero MUST be supported if the
implementation supports manually configured PW
without MPLS outer tunnel.
"
::= { pwMplsCompliances 2 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The compliance statement for agents that provide read only support for PW-MPLS MIB Module. Such devices can then be monitored but cannot be configured using this MIB module.
Belden, GarrettCom and Hirschmann IT official standalone MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: pwMplsModuleReadOnlyCompliance
{
"smi_kind": "MODULE-COMPLIANCE",
"definition": [
"pwMplsModuleReadOnlyCompliance",
"MODULE-COMPLIANCE",
"STATUS",
"current",
"DESCRIPTION",
"\"The compliance statement for agents that provide read only support for PW-MPLS MIB Module. Such devices can then be monitored but cannot be configured using this MIB module.\"",
"MODULE",
"MANDATORY-GROUPS",
"{",
"pwMplsGroup",
",",
"pwMplsOutboundMainGroup",
",",
"pwMplsInboundGroup",
",",
"pwMplsMappingGroup",
"}",
"GROUP",
"pwMplsOutboundTeGroup",
"DESCRIPTION",
"\"This group MUST be supported if the implementation allows MPLS TE tunnels to carry PW traffic. \"",
"OBJECT",
"pwMplsMplsType",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. Support of pwOnly(2) is not required. At least one of mplsTe(0) or mplsNonTe(1) MUST be supported if signaling of PW is supported. \"",
"OBJECT",
"pwMplsExpBitsMode",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. Support of specifiedValue(2) and serviceDependant(3) is optional. \"",
"OBJECT",
"pwMplsExpBits",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsTtl",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsLocalLdpID",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsLocalLdpEntityID",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsStorageType",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsOutboundLsrXcIndex",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. A value other than zero MUST be supported if the implementation support non TE signaling of the outer tunnel. \"",
"OBJECT",
"pwMplsOutboundTunnelIndex",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsOutboundTunnelLclLSR",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsOutboundTunnelPeerLSR",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. \"",
"OBJECT",
"pwMplsOutboundIfIndex",
"MIN-ACCESS",
"read-only",
"DESCRIPTION",
"\"Write access is not required. A value other than zero MUST be supported if the implementation supports manually configured PW without MPLS outer tunnel. \"",
"::=",
"{",
"pwMplsCompliances",
"2",
"}"
],
"syntax_tree": [
[
"Status",
"current"
],
[
"DESCRIPTION",
"The compliance statement for agents that provide read only support for PW-MPLS MIB Module. Such devices can then be monitored but cannot be configured using this MIB module."
],
null,
[
"ComplianceModules",
[
[
null,
[
"pwMplsGroup",
"pwMplsOutboundMainGroup",
"pwMplsInboundGroup",
"pwMplsMappingGroup",
"pwMplsOutboundTeGroup"
]
]
]
]
]
}Module: PW-MPLS-STD-MIB
See published definition above
{'IF-MIB': ['InterfaceIndexOrZero'], 'SNMPv2-TC': ['StorageType'], 'PW-STD-MIB': ['pwIndex'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'transmission', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'PW-TC-STD-MIB': ['PwIndexType'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLsrIdentifier'], 'MPLS-LSR-STD-MIB': ['MplsIndexType']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2076.13.6.2.2.1 | pwMplsModuleFullCompliance | 0 | 0 |