OID reference
1.3.6.1.4.1.2076.134.1.3.1.3
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Pathcost is always assumed as 128 for Provider Edge Ports. For CEP, port-path cost w…
Identification
{1 3 6 1 4 1 2076 134 1 3 1 3}
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: fsMIPbRstPort, fsMIPbRstCepSvid.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2076.134.1.3.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
fsMIPbRstCVlanPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of paths towards the
spanning tree root which include this port. 802.1D-1990 recommends
that the default value of this parameter be in inverse proportion to
the speed of the attached LAN.
Pathcost is always assumed as 128 for Provider Edge Ports.
For CEP, port-path cost will be taken from dot1dStpPortPathCost of
fsMIPbRstPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { fsMIPbRstCVlanPortInfoEntry 3 }fsMIPbRstCVlanPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object specifies the contribution of this port to the path cost
of paths towards the spanning tree root which include this port.
802.1D-1990 recommends that the default value of this parameter be
in inverse proportion to the speed of the attached LAN.
Pathcost is always assumed as 128 for Provider Edge Ports.
For CEP, port-path cost will be taken from dot1dStpPortPathCost of
fsMIPbRstPort."
REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.3"
::= { fsMIPbRstCVlanPortInfoEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Pathcost is always assumed as 128 for Provider Edge Ports. For CEP, port-path cost will be taken from dot1dStpPortPathCost of fsMIPbRstPort.
Belden, GarrettCom and Hirschmann IT official standalone MIBs
Description 2
This object specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Pathcost is always assumed as 128 for Provider Edge Ports. For CEP, port-path cost will be taken from dot1dStpPortPathCost of fsMIPbRstPort.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: fsMIPbRstCVlanPortPathCost
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsMIPbRstCVlanPortPathCost",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Pathcost is always assumed as 128 for Provider Edge Ports. For CEP, port-path cost will be taken from dot1dStpPortPathCost of fsMIPbRstPort.\"",
"REFERENCE",
"\"IEEE 802.1D-1990: Section 4.5.5.3\"",
"::=",
"{",
"fsMIPbRstCVlanPortInfoEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Pathcost is always assumed as 128 for Provider Edge Ports. For CEP, port-path cost will be taken from dot1dStpPortPathCost of fsMIPbRstPort."
],
[
"REFERENCE",
"IEEE 802.1D-1990: Section 4.5.5.3"
],
null,
null,
null
]
}Module: ARICENT-MIPB-RSTP-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Counter32', 'TimeTicks', 'enterprises']}Related source files and packages:
Status in source: current.
Names: fsMIPbRstCVlanPortPathCost
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsMIPbRstCVlanPortPathCost",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"65535",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This object specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Pathcost is always assumed as 128 for Provider Edge Ports. For CEP, port-path cost will be taken from dot1dStpPortPathCost of fsMIPbRstPort.\"",
"REFERENCE",
"\"IEEE 802.1D-1990: Section 4.5.5.3\"",
"::=",
"{",
"fsMIPbRstCVlanPortInfoEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
65535
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object specifies the contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. Pathcost is always assumed as 128 for Provider Edge Ports. For CEP, port-path cost will be taken from dot1dStpPortPathCost of fsMIPbRstPort."
],
[
"REFERENCE",
"IEEE 802.1D-1990: Section 4.5.5.3"
],
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: ARICENT-MIPB-RSTP-MIB
See published definition above
{'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'TruthValue'], 'BRIDGE-MIB': ['Timeout', 'BridgeId'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'Integer32', 'Counter32', 'TimeTicks', 'enterprises']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2076.134.1.3.1.1 | fsMIPbRstCepSvid | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.2 | fsMIPbRstCVlanPortPriority | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.4 | fsMIPbRstCVlanPortRole | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.5 | fsMIPbRstCVlanPortState | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.6 | fsMIPbRstCVlanPortAdminEdgePort | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.7 | fsMIPbRstCVlanPortOperEdgePort | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.8 | fsMIPbRstCVlanPortAdminPointToPoint | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.9 | fsMIPbRstCVlanPortOperPointToPoint | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.10 | fsMIPbRstCVlanPortAutoEdge | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.11 | fsMIPbRstCVlanPortDesignatedRoot | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.12 | fsMIPbRstCVlanPortDesignatedCost | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.13 | fsMIPbRstCVlanPortDesignatedBridge | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.14 | fsMIPbRstCVlanPortDesignatedPort | 0 | 0 | |
| 1.3.6.1.4.1.2076.134.1.3.1.15 | fsMIPbRstCVlanPortForwardTransitions | 0 | 0 |