OID reference
1.3.6.1.4.1.2076.28.3.1.3
The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
Identification
{1 3 6 1 4 1 2076 28 3 1 3}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.2076.28.3.1.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
fsipv6UdpInErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received UDP datagrams that
could not be delivered for reasons other
than the lack of an application at
the destination port."
::= { fsipv6UdpScalars 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Belden, GarrettCom and Hirschmann IT official standalone MIBs
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: fsipv6UdpInErrors
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsipv6UdpInErrors",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port.\"",
"::=",
"{",
"fsipv6UdpScalars",
"3",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: ARICENT-IPV6-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'enterprises', 'Integer32', 'Unsigned32', 'TimeTicks'], 'INET-ADDRESS-MIB': ['InetZoneIndex', 'InetScopeType']}Related source files and packages:
Module: ARICENT-IPV6-MIB
{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['RowStatus', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Counter32', 'enterprises', 'Integer32', 'Unsigned32', 'TimeTicks'], 'INET-ADDRESS-MIB': ['InetZoneIndex', 'InetScopeType']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2076.28.3.1.1 | fsipv6UdpInDatagrams | 0 | 0 | |
| 1.3.6.1.4.1.2076.28.3.1.2 | fsipv6UdpNoPorts | 0 | 0 | |
| 1.3.6.1.4.1.2076.28.3.1.4 | fsipv6UdpOutDatagrams | 0 | 0 |