Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"fsbgp4TraceEnable",
"OBJECT-TYPE",
"SYNTAX",
"Unsigned32",
"(",
"0",
".",
".",
"4294967295",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object can be used to enable trace dynamically in BGP module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - All Failures, 1 - All Resource Allocation failure, 2 - Init & Shutdown Trace, 3 - Management Trace, 4 - Control Path Trace, 5 - Data Path Trace, 6 - Peer Connection Trace, 7 - Update Message Trace, 8 - FDB Update Trace, 9 - Keep-Alive Trace, 10 - All Transmission Trace, 11 - All Reception Trace, 12 - Dampening Trace, 13 - Events Trace, 14 - High level Packet Dump 15 - Low level packet Dump 16 - Hex Dump The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The user have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then value of 6 should be entered. This object can be set only if fsbgp4LocalAs has been configured.\"",
"::=",
"{",
"fsbgp4Scalars",
"7",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Unsigned32",
[
"integerSubType",
[
[
0,
4294967295
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object can be used to enable trace dynamically in BGP module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integer variable represents a level of Trace. The bits represents the levels as follows: 0 - All Failures, 1 - All Resource Allocation failure, 2 - Init & Shutdown Trace, 3 - Management Trace, 4 - Control Path Trace, 5 - Data Path Trace, 6 - Peer Connection Trace, 7 - Update Message Trace, 8 - FDB Update Trace, 9 - Keep-Alive Trace, 10 - All Transmission Trace, 11 - All Reception Trace, 12 - Dampening Trace, 13 - Events Trace, 14 - High level Packet Dump 15 - Low level packet Dump 16 - Hex Dump The remaining bits are unused. The combination of levels are also allowed. For example if the bits 1 and 2 are set, then the Trace statements related to management and Data Path will be printed. The user have to enter the corresponding integer value for the bits set. For example if bits 1 and 2 are set then value of 6 should be entered. This object can be set only if fsbgp4LocalAs has been configured."
],
null,
null,
null,
null
]
}