fsPnacTraceOption

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "fsPnacTraceOption",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to enable Trace Statements in Network Access Control Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The maping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are set then user has to give the value 3.\"",
    "DEFVAL",
    "{",
    "1",
    "}",
    "::=",
    "{",
    "fsPnacPaeSystem",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to enable Trace Statements in Network Access Control Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The maping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combination of levels are also allowed. For example if the bits 0 and 1 are set, then the Trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding INTEGER VALUE for the bits set. For example if bits 0 and 1 are set then user has to give the value 3."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      1
    ]
  ]
}

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "fsPnacTraceOption",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"This object is used to enable trace statements in Network Access Control Module. A four byte integer is used for enabling the level of tracing. Each bit in the four byte integer represents a particular level of trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combinations of levels are also allowed. For example, if the bits 0 and 1 are set, then the trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding integer value for the bits set. For example, if bits 0 and 1 are set, then user has to give the value 3.\"",
    "DEFVAL",
    "{",
    "0",
    "}",
    "::=",
    "{",
    "fsPnacPaeSystem",
    "2",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "This object is used to enable trace statements in Network Access Control Module. A four byte integer is used for enabling the level of tracing. Each bit in the four byte integer represents a particular level of trace. The mapping between the bit positions & the level of trace is as follows: 0 - Init and Shutdown Traces 1 - Management Traces 2 - Data Path Traces 3 - Control Plane Traces 4 - Packet Dump Traces 5 - Traces related to All Resources except Buffers 6 - All Failure Traces 7 - Buffer Traces The remaining bits are unused. Combinations of levels are also allowed. For example, if the bits 0 and 1 are set, then the trace statements related to Init-Shutdown and management will be printed. The user has to enter the corresponding integer value for the bits set. For example, if bits 0 and 1 are set, then user has to give the value 3."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      0
    ]
  ]
}