OID reference

portLED

1.3.6.1.4.1.208.39.3.2.1.3

Description

The value of this object represent the status (colour) of the LED(s) attached to this port. Lower 3 bits indicates off/colour (off(0), red(1), green(2), yellow(4)), Higher 5 bits reserved for flash frequency. For value 0-9 the resolution is 0.1 Hz and 10-31 the resolution is 1.0 Hz. Ex. 8 gives 0.8 Hz and 11 gives 2 H…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.208.39.3.2.1 (portEntry)
Node code
3
Node name
portLED
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.208.39.3.2.1.3
URN notation
urn:oid:1.3.6.1.4.1.208.39.3.2.1.3
Type
OBJECT-TYPE
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 208 39 3 2 1 3}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) scanet(208) ethSwitch(39) ethSwitchMACVioEvent(3) portTable(2) portEntry(1) portLED(3)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) scanet(208) ethSwitch(39) ports(3) portTable(2) portEntry(1) portLED(3)}
  • Additional combinations skipped.
OID-IRI notation
  • /1/3/6/1/4/1/208/39/3/2/1/3
  • /ISO/Identified-Organization/6/1/4/1/208/39/3/2/1/3
  • /ISO/3/6/1/4/1/208/39/3/2/1/3
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/identified-organization/dod/internet/private/enterprise/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • /iso/identified-organization/dod/internet/private/enterprises/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/identified-organization/dod/internet/private/enterprises/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • /iso/identified-organization/dod/internet/private/vendor-objects/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/identified-organization/dod/internet/private/vendor-objects/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/enterprise/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/enterprise/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/enterprises/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/enterprises/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/ldap-enterprise/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/ldap-enterprise/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/vendor-objects/scanet/ethSwitch/ethSwitchMACVioEvent/portTable/portEntry/portLED
  • /iso/org/dod/internet/private/vendor-objects/scanet/ethSwitch/ports/portTable/portEntry/portLED
  • Additional combinations skipped.

SNMP properties

Value type
OCTET STRING
Maximum access defined by MIB
read-only
Status in MIB
mandatory
Allowed size (octets)
0–15

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In ETH-SWITCH-MIB, the row index portNumber is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.208.39.3.2.1.3.<portNumber>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.208.39.3.2.1.3

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

The value of this object represent the
status (colour) of the LED(s) attached to
this port.

Lower 3 bits indicates off/colour
(off(0), red(1), green(2), yellow(4)),
Higher 5 bits reserved for flash
frequency. For value 0-9 the resolution
is 0.1 Hz and 10-31 the resolution is
1.0 Hz. Ex. 8 gives 0.8 Hz and 11 gives
2 Hz.

For PIM slots with two LEDs that can
contain either an expansion card, a one
port PIM or a PIM with multiple ports a
special case is needed. The two LEDs
are mapped into a two LED octets. In
case the PIM slot contain a PIM with
multiple ports a third LED octet
represent the first port on the PIM.

In the case there is two LEDs on the
front, the first LED octet is the front
and the second the back.
Sources for this description

Circitor

Parsed from ETH-SWITCH-MIB.mib · ETH-SWITCH-MIB

Source file: Download ETH-SWITCH-MIB.mib

Browse all files from Circitor

MIBdepot

Source file: Download SCA_ESWT.MIB.txt

Browse all files from MIBdepot

Historical records

Additional source information

Information from MIBdepot 
portLED OBJECT-TYPE
                        SYNTAX  OCTET STRING (SIZE (0..15))
                        ACCESS  read-only
                        STATUS  mandatory
                        DESCRIPTION
                                  "The value of this object represent the
                                  status (colour) of the LED(s) attached to
                                  this port.

                                  Lower 3 bits indicates off/colour
                                  (off(0), red(1), green(2), yellow(4)),
                                  Higher 5 bits reserved for flash
                                  frequency. For value 0-9 the resolution
                                  is 0.1 Hz and 10-31 the resolution is
                                  1.0 Hz. Ex. 8 gives 0.8 Hz and 11 gives
                                  2 Hz.

                                  For PIM slots with two LEDs that can
                                  contain either an expansion card, a one
                                  port PIM or a PIM with multiple ports a
                                  special case is needed. The two LEDs
                                  are mapped into a two LED octets. In
                                  case the PIM slot contain a PIM with
                                  multiple ports a third LED octet
                                  represent the first port on the PIM.

                                  In the case there is two LEDs on the
                                  front, the first LED octet is the front
                                  and the second the back."
                        ::= { portEntry 3 }
Information from OID Repository
Vendor: Cray Communications A/S
Module: ETH-SWITCH-MIB

[Automatically extracted from oidview.com]
Information from Circitor 
portLED OBJECT-TYPE
                        SYNTAX  OCTET STRING (SIZE (0..15))
                        ACCESS  read-only
                        STATUS  mandatory
                        DESCRIPTION
                                  "The value of this object represent the
                                  status (colour) of the LED(s) attached to
                                  this port.

                                  Lower 3 bits indicates off/colour
                                  (off(0), red(1), green(2), yellow(4)),
                                  Higher 5 bits reserved for flash
                                  frequency. For value 0-9 the resolution
                                  is 0.1 Hz and 10-31 the resolution is
                                  1.0 Hz. Ex. 8 gives 0.8 Hz and 11 gives
                                  2 Hz.

                                  For PIM slots with two LEDs that can
                                  contain either an expansion card, a one
                                  port PIM or a PIM with multiple ports a
                                  special case is needed. The two LEDs
                                  are mapped into a two LED octets. In
                                  case the PIM slot contain a PIM with
                                  multiple ports a third LED octet
                                  represent the first port on the PIM.

                                  In the case there is two LEDs on the
                                  front, the first LED octet is the front
                                  and the second the back."
                        ::= { portEntry 3 }

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.208)

Ekner Hartvig

Siblings (6)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.208.39.3.2.1.1 portNumber00 A number that uniquely identifies a port
1.3.6.1.4.1.208.39.3.2.1.2 portInterfaceIndex00 The value of this object equals the ports
interface index value, ex. portIfIndex. If
the value of this object is zero, then the
po…
1.3.6.1.4.1.208.39.3.2.1.4 portState00 This is a bit array which represent the
state of the port.

bit 0: Disabled due to configuration
bit 1: Hardware error
bit 2: No lin…
1.3.6.1.4.1.208.39.3.2.1.5 portCardNumber00 The cardNumber in the switch system.
1.3.6.1.4.1.208.39.3.2.1.6 portPimNumber00 The pimNumber in the switch system.
1.3.6.1.4.1.208.39.3.2.1.7 portPimPortNumber00 The relative number of the port on the PIM.