Status in source: current.
Names: gigeClientCtpPmTxOutPauseFrames
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"gigeClientCtpPmTxOutPauseFrames",
"OBJECT-TYPE",
"SYNTAX",
"HCPerfIntervalCount",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. This counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces.\"",
"::=",
"{",
"gigeClientCtpPmEntry",
"37",
"}"
],
"syntax_tree": [
[
"row",
"HCPerfIntervalCount"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. This counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces."
],
null,
null,
null,
null
]
}
- Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
· Publisher's source file: Source package: observium-community-latest.tar.gz
Vendor MIB copy from the Observium Community archive.
Module: INFINERA-PM-GIGECLIENTCTP-MIB
See published definition above
Module imports
{'IF-MIB': ['ifIndex'], 'SNMPv2-TC': ['DisplayString', 'TruthValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'Counter64'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'INFINERA-TC-MIB': ['FloatHundredths', 'InfnServiceType'], 'INFINERA-REG-MIB': ['perfMon'], 'HC-PerfHist-TC-MIB': ['HCPerfIntervalCount']}
Related source files and packages: