rcDiagIsidMirroringStatsTable — Nortel MIB copies (LibreNMS/Observium Community)
This table is used to show/clear number of packets which got mirrored into isid.
{1 3 6 1 4 1 2272 1 23 19}
This table is used to show/clear number of packets which got mirrored into isid.
Status in source: current.
Names: rcDiagIsidMirroringStatsTable
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"rcDiagIsidMirroringStatsTable",
"OBJECT-TYPE",
"SYNTAX",
"SEQUENCE",
"OF",
"RcDiagIsidMirroringStatsEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"This table is used to show/clear number of packets which got mirrored into isid.\"",
"::=",
"{",
"rcDiag",
"19",
"}"
],
"syntax_tree": [
[
"conceptualTable",
[
"row",
"RcDiagIsidMirroringStatsEntry"
]
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This table is used to show/clear number of packets which got mirrored into isid."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. Nortel support.
Module: RAPID-CITY
rcDiagIsidMirroringStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RcDiagIsidMirroringStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to show/clear
number of packets which got mirrored into isid."
::= { rcDiag 19 }{'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'IGMP-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'IPV6-MIB': ['ipv6RouteEntry'], 'LLDP-MIB': ['AddressFamilyNumbers', 'LldpManAddress', 'LldpSystemCapabilitiesMap', 'LldpPortIdSubtype', 'LldpPortId', 'lldpRemEntry'], 'MSDP-MIB': ['msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType', 'TimeInterval'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Gauge32', 'Integer32', 'NOTIFICATION-TYPE', 'Unsigned32', 'Counter32', 'Counter64'], 'RFC1155-SMI': ['enterprises', 'IpAddress', 'TimeTicks', 'Counter'], 'RFC1213-MIB': ['DisplayString', 'PhysAddress', 'ifIndex', 'ifAdminStatus', 'ifOperStatus', 'ifAdminStatus', 'ifOperStatus', 'ifAdminStatus', 'ifOperStatus', 'ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IPMROUTE-MIB': ['ipMRouteEntry', 'ipMRouteNextHopEntry', 'ipMRouteInterfaceEntry'], 'IPV6-MLD-MIB': ['mldInterfaceQuerier', 'mldInterfaceIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'IEEE8021-SECY-MIB': ['secyIfEntry'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel'], 'RADIUS-DYNAUTH-SERVER-MIB': ['radiusDynAuthClientEntry']}Related source files and packages:
Downloaded: 2026-10-23T19:25:49.558043+00:00.
Vendor MIB copy from the Observium Community archive. Nortel support.
Module: RC-DIAG-MIB
rcDiagIsidMirroringStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RcDiagIsidMirroringStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION "This table is used to show/clear
number of packets which got mirrored into isid."
::= { rcDiag 19 }{'IF-MIB': ['InterfaceIndex'], 'SNMPv2-TC': ['DisplayString', 'TruthValue', 'MacAddress', 'RowStatus'], 'RAPID-CITY': ['rcDiag', 'rcMirror', 'EnableValue', 'PortSet'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Integer32', 'IpAddress', 'Counter32'], 'RC-ISIS-MIB': ['IsisPlsbNodeNickName']}Related source files and packages:
Downloaded: 2026-10-23T19:25:54.598901+00:00.
Vendor MIB copy from the Observium Community archive. Nortel support.
Module: RAPID-CITY
rcDiagIsidMirroringStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF RcDiagIsidMirroringStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table is used to show/clear
number of packets which got mirrored into isid."
::= { rcDiag 19 }{'IF-MIB': ['ifIndex', 'ifAdminStatus', 'ifOperStatus'], 'IP-MIB': ['ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'IPV6-MIB': ['ipv6RouteEntry'], 'LLDP-MIB': ['AddressFamilyNumbers', 'LldpManAddress', 'LldpSystemCapabilitiesMap', 'LldpPortIdSubtype', 'LldpPortId', 'lldpRemEntry'], 'MSDP-MIB': ['msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry', 'msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DisplayString', 'PhysAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType', 'TimeInterval'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Gauge32', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'enterprises', 'IpAddress', 'TimeTicks'], 'TUNNEL-MIB': ['tunnelInetConfigEntry'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IGMP-STD-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'IPV6-MLD-MIB': ['mldInterfaceQuerier', 'mldInterfaceIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'IPMROUTE-STD-MIB': ['ipMRouteEntry', 'ipMRouteNextHopEntry', 'ipMRouteInterfaceEntry'], 'LLDP-EXT-MED-MIB': ['PolicyAppType'], 'IEEE8021-SECY-MIB': ['secyIfEntry'], 'POWER-ETHERNET-MIB': ['pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel']}Related source files and packages:
Downloaded: 2026-10-23T19:25:54.470905+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.23.19.1 | rcDiagIsidMirroringStatsEntry | 4 | 4 |
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2272.1.23.0 | rcDiagMib | 0 | 0 | RC-DIAG-MIB |
| 1.3.6.1.4.1.2272.1.23.1 | rcDiagMirrorByPortTable | 1 | 24 | This table is used to configure the Mirror By Port feature. This feature allows the device to forward a copy of each packet seen… |
| 1.3.6.1.4.1.2272.1.23.2 | rcDiagPortConvSteeringTable | 1 | 8 | Diag Port Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.3 | rcDiagMacConvSteeringTable | 1 | 8 | Diag Mac Conv Steering Table |
| 1.3.6.1.4.1.2272.1.23.4 | rcDiagVctTable | 1 | 29 | Diag Vct Table |
| 1.3.6.1.4.1.2272.1.23.10 | rcDiagSaveConfig | 1 | 1 | Used to configure whether the various mirror feature settings should be saved and restored across system reboot. |
| 1.3.6.1.4.1.2272.1.23.11 | rcDiagMirrorByPortTblSize | 1 | 1 | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.12 | rcDiagPortConvSteeringTblSize | 1 | 1 | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.13 | rcDiagMacConvSteeringTblSize | 1 | 1 | Used to indicate table size. |
| 1.3.6.1.4.1.2272.1.23.14 | rcDiagDiagnosticsEnable | 1 | 1 | Used to enable/disable the mirroring feature for the entire device. This setting overrides any setting in the various mirroring … |
| 1.3.6.1.4.1.2272.1.23.15 | rcDiagPcap | 22 | 92 | |
| 1.3.6.1.4.1.2272.1.23.16 | rcDiagLockupDiagnosticEnable | 1 | 1 | Used as a flag to enable/disable the lockup diagnostic feature for the R-Modules |
| 1.3.6.1.4.1.2272.1.23.17 | rcDiagLockupActionEnable | 1 | 1 | Used as a flag to determine if action is to be taken when lockup is detected for r-modules |
| 1.3.6.1.4.1.2272.1.23.18 | rcDiagMonitorByIsidTable | 1 | 10 |