Reference record for OID 1.3.6.1.4.1.2272.1.85.3.9

rcKhiChassisStandbyCpuState

Status in source: current.

Names: rcKhiChassisStandbyCpuState

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "rcKhiChassisStandbyCpuState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "initialization",
    "(",
    "1",
    ")",
    ",",
    "oneWayActive",
    "(",
    "2",
    ")",
    ",",
    "twoWayActive",
    "(",
    "3",
    ")",
    ",",
    "synchronized",
    "(",
    "4",
    ")",
    ",",
    "remoteIncompatible",
    "(",
    "5",
    ")",
    ",",
    "error",
    "(",
    "6",
    ")",
    ",",
    "disabled",
    "(",
    "7",
    ")",
    ",",
    "peerNotConnected",
    "(",
    "8",
    ")",
    ",",
    "peerConnected",
    "(",
    "9",
    ")",
    ",",
    "lostPeerConnection",
    "(",
    "10",
    ")",
    ",",
    "notSynchronized",
    "(",
    "11",
    ")",
    ",",
    "notapplicable",
    "(",
    "12",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Indicate the standby-CPU state. initialization - indicate the CPU is in this state (1). oneWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (2). twoWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (3). synchronized - Table based synchroniztion was completed on the current CPU (4). remoteIncompatible - CPUs framework version is incompatible with the remote CPU (5). error - If an invalid event is generated in a given state the CPU enters Error state (6). disabled - High Availability is not enabled (7). peerNotConnected - no peer connection is established (8). peerConnected - peer connection is established (9). lostPeerConnection - lost connection to peer/Standby CPU (10). notSynchronized - Table Sync is not complete (11).\"",
    "::=",
    "{",
    "rcKhiChassis",
    "9",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "initialization",
            1
          ],
          [
            "oneWayActive",
            2
          ],
          [
            "twoWayActive",
            3
          ],
          [
            "synchronized",
            4
          ],
          [
            "remoteIncompatible",
            5
          ],
          [
            "error",
            6
          ],
          [
            "disabled",
            7
          ],
          [
            "peerNotConnected",
            8
          ],
          [
            "peerConnected",
            9
          ],
          [
            "lostPeerConnection",
            10
          ],
          [
            "notSynchronized",
            11
          ],
          [
            "notapplicable",
            12
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Indicate the standby-CPU state. initialization - indicate the CPU is in this state (1). oneWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (2). twoWayActive - Modules that need to be synchronized have registered with the framework (either locally or a message was received from remote CPU (3). synchronized - Table based synchroniztion was completed on the current CPU (4). remoteIncompatible - CPUs framework version is incompatible with the remote CPU (5). error - If an invalid event is generated in a given state the CPU enters Error state (6). disabled - High Availability is not enabled (7). peerNotConnected - no peer connection is established (8). peerConnected - peer connection is established (9). lostPeerConnection - lost connection to peer/Standby CPU (10). notSynchronized - Table Sync is not complete (11)."
    ],
    null,
    null,
    null,
    null
  ]
}

• Nortel MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. Nortel support.

  Module: RAPID-CITY

  Published definition

  rcKhiChassisStandbyCpuState OBJECT-TYPE
          SYNTAX          INTEGER {
                              initialization(1),
                              oneWayActive(2),
                              twoWayActive(3),
                              synchronized(4),
                              remoteIncompatible(5),
                              error(6),
                              disabled(7),
                              peerNotConnected(8),
                              peerConnected(9),
                              lostPeerConnection(10),
                              notSynchronized(11),
                              notapplicable(12)
  
  			}
          MAX-ACCESS      read-only
          STATUS          current
  	DESCRIPTION     "Indicate the standby-CPU state. 
                           initialization - indicate the CPU is in this state (1). 
                           oneWayActive - Modules that need to be synchronized 
  					have registered with the framework (either 
  					locally or a message was received from 
  					remote CPU (2).
                           twoWayActive - Modules that need to be synchronized have 
  					registered with the framework (either 
  					locally or a message was received from 
  					remote CPU (3).
                           synchronized - Table based synchroniztion was completed 
  					on the current CPU (4).
                           remoteIncompatible - CPUs framework version is incompatible 
  					with the remote CPU (5).
                           error  - If an invalid event is generated in a given state the 
  					CPU enters Error state (6).
  			 disabled - High Availability is not enabled (7).
                           peerNotConnected - no peer connection is established (8).
                           peerConnected - peer connection is established (9).
                           lostPeerConnection - lost connection to peer/Standby CPU (10).
                           notSynchronized - Table Sync is not complete (11)."
          ::= { rcKhiChassis 9 }

  Module imports

  {'IF-MIB': ['ifIndex', 'ifAdminStatus', 'ifOperStatus'], 'IP-MIB': ['ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'IPV6-MIB': ['ipv6RouteEntry'], 'LLDP-MIB': ['AddressFamilyNumbers', 'LldpManAddress', 'LldpSystemCapabilitiesMap', 'LldpPortIdSubtype', 'LldpPortId', 'lldpRemEntry'], 'MSDP-MIB': ['msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry', 'msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DisplayString', 'PhysAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType', 'TimeInterval'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Gauge32', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'enterprises', 'IpAddress', 'TimeTicks'], 'TUNNEL-MIB': ['tunnelInetConfigEntry'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IGMP-STD-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'IPV6-MLD-MIB': ['mldInterfaceQuerier', 'mldInterfaceIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'IPMROUTE-STD-MIB': ['ipMRouteEntry', 'ipMRouteNextHopEntry', 'ipMRouteInterfaceEntry'], 'LLDP-EXT-MED-MIB': ['PolicyAppType'], 'IEEE8021-SECY-MIB': ['secyIfEntry'], 'POWER-ETHERNET-MIB': ['pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel']}

  · Download RAPID-CITY

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: RAPID-CITY::rcKhiChassisStandbyCpuState.
  Source version and references

  Downloaded: 2026-10-23T19:25:54.470905+00:00.

• Netdisco MIB archive copies · Publisher's source file: rapid_city.mib

  Vendor MIB copy from the Netdisco archive.

  Module: RAPID-CITY

  Published definition

  rcKhiChassisStandbyCpuState OBJECT-TYPE
          SYNTAX          INTEGER {
                              initialization(1),
                              oneWayActive(2),
                              twoWayActive(3),
                              synchronized(4),
                              remoteIncompatible(5),
                              error(6),
                              disabled(7),
                              peerNotConnected(8),
                              peerConnected(9),
                              lostPeerConnection(10),
                              notSynchronized(11),
                              notapplicable(12)
  
  			}
          MAX-ACCESS      read-only
          STATUS          current
  	DESCRIPTION     "Indicate the standby-CPU state. 
                           initialization - indicate the CPU is in this state (1). 
                           oneWayActive - Modules that need to be synchronized 
  					have registered with the framework (either 
  					locally or a message was received from 
  					remote CPU (2).
                           twoWayActive - Modules that need to be synchronized have 
  					registered with the framework (either 
  					locally or a message was received from 
  					remote CPU (3).
                           synchronized - Table based synchroniztion was completed 
  					on the current CPU (4).
                           remoteIncompatible - CPUs framework version is incompatible 
  					with the remote CPU (5).
                           error  - If an invalid event is generated in a given state the 
  					CPU enters Error state (6).
  			 disabled - High Availability is not enabled (7).
                           peerNotConnected - no peer connection is established (8).
                           peerConnected - peer connection is established (9).
                           lostPeerConnection - lost connection to peer/Standby CPU (10).
                           notSynchronized - Table Sync is not complete (11)."
          ::= { rcKhiChassis 9 }

  Module imports

  {'IF-MIB': ['ifIndex', 'ifAdminStatus', 'ifOperStatus'], 'IP-MIB': ['ipNetToMediaNetAddress', 'ipNetToMediaPhysAddress'], 'IPV6-TC': ['Ipv6IfIndex', 'Ipv6Address', 'Ipv6AddressPrefix', 'Ipv6AddressIfIdentifier', 'Ipv6IfIndexOrZero'], 'BGP4-MIB': ['bgpPeerRemoteAddr', 'bgpPeerLastError', 'bgpPeerState'], 'IPV6-MIB': ['ipv6RouteEntry'], 'LLDP-MIB': ['AddressFamilyNumbers', 'LldpManAddress', 'LldpSystemCapabilitiesMap', 'LldpPortIdSubtype', 'LldpPortId', 'lldpRemEntry'], 'MSDP-MIB': ['msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry', 'msdpPeerFsmEstablishedTransitions', 'msdpPeerState', 'msdpPeerEntry', 'msdpSACacheEntry'], 'VRRP-MIB': ['VrId'], 'DVMRP-MIB': ['dvmrpInterfaceIfIndex', 'dvmrpNeighborIfIndex', 'dvmrpNeighborAddress', 'dvmrpInterfaceOperState'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TruthValue', 'MacAddress', 'DisplayString', 'PhysAddress', 'DateAndTime', 'TimeStamp', 'RowPointer', 'StorageType', 'TimeInterval'], 'ATM-TC-MIB': ['AtmAddr'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Gauge32', 'Integer32', 'Unsigned32', 'Counter32', 'Counter64', 'enterprises', 'IpAddress', 'TimeTicks'], 'TUNNEL-MIB': ['tunnelInetConfigEntry'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP'], 'DIFFSERV-MIB': ['IndexInteger'], 'IGMP-STD-MIB': ['igmpInterfaceIfIndex', 'igmpInterfaceQuerier', 'igmpCacheAddress', 'igmpCacheIfIndex'], 'IPMROUTE-MIB': ['ipMRouteEntry', 'ipMRouteNextHopEntry', 'ipMRouteInterfaceEntry'], 'IPV6-MLD-MIB': ['mldInterfaceQuerier', 'mldInterfaceIfIndex'], 'MPLS-TC-STD-MIB': ['MplsTunnelIndex', 'MplsLabel', 'MplsExtendedTunnelId', 'MplsTunnelInstanceIndex', 'MplsLdpIdentifier', 'MplsLSPID'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressPrefixLength', 'InetPortNumber', 'InetAutonomousSystemNumber'], 'LLDP-EXT-MED-MIB': ['PolicyAppType'], 'IEEE8021-SECY-MIB': ['secyIfEntry'], 'POWER-ETHERNET-MIB': ['pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpSecurityLevel', 'SnmpSecurityModel']}

  · Download rapid_city.mib

  Related source files and packages:

  • Netdisco archive revision metadata (not a manufacturer release date)File: repos/netdisco/netdisco-mibs/commits/master; 15,422 bytes
  • Netdisco MIB distribution at the selected archive revision38.9 MiB
  
  Source location: RAPID-CITY::rcKhiChassisStandbyCpuState.
  Source version and references

  Downloaded: 2026-10-24T15:28:11.428982+00:00.