| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.1 |
fanCabinetId | 0 | 0 |
ID of the cabinet the cooling device (fan) is in (index, 0 based) |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.2 |
fanNumber | 0 | 0 |
Number of the fan in this cabinet (index, 0 based) |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.3 |
fanStatus | 0 | 0 |
Status of this fan (OK, failed...).
Status disabled(2) is no longer used.
Status prefailure-predicted(5) means the fan will fail … |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.4 |
fanPurpose | 0 | 0 |
Purpose of this fan (housing, component, CPU on-chip, power supply...).
Purpose disabled(2) is currently not used. |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.5 |
fanPositionX | 0 | 0 |
Position of the fan (X coordinate, left bottom front corner) in percent,
relative to the left, bottom and front corner of
the cab… |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.6 |
fanPositionY | 0 | 0 |
Position of the fan (Y coordinate, left bottom front corner) in percent,
relative to the left, bottom and front corner of
the cab… |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.7 |
fanPositionZ | 0 | 0 |
Position of the fan (Z coordinate, left bottom front corner) in percent,
relative to the left, bottom and front corner of
the cab… |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.8 |
fanCurrentSpeed | 0 | 0 |
Current speed of the fan (in revolutions per minute, -1 = unknown) |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.9 |
fanNominalMaximumSpeed | 0 | 0 |
Nominal speed of the fan (in revolutions per minute)
on maximum power; the speed is measured the first time
the agent is installe… |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.10 |
fanCurrentMaximumSpeed | 0 | 0 |
Current speed of the fan (in revolutions per minute) on maximum power (-1 = unknown). |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.11 |
fanMaximumSpeedCriticalLevel | 0 | 0 |
Obsolete - no longer supported. |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.14 |
fanFailReaction | 0 | 0 |
Reaction when a fan has failed (shutdown and power-off, continue...).
The value unknown(1) cannot be set, a SET will deliver 'ba… |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.15 |
fanFailShutdownDelay | 0 | 0 |
Delay time (in seconds) when shutdown should commit on fan fail
(if shutdown-and-off is configured,
0 = immediately, -1 = unknown… |
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.16 |
fanDesignation | 0 | 0 |
|
| 1.3.6.1.4.1.231.2.10.2.2.5.2.2.1.17 |
fanIdentification | 0 | 0 |
|