{1 3 6 1 4 1 232 0 13601550}
Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed.
Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed. The identity of the affected Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, bay, fed_class and num_times field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.
Status in source: unspecified.
Names: sCellEventTrap-06-0e
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap-06-0e",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed.\"",
"::=",
"13601550"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed."
],
null
]
}Module: CPQHSV-MIB
sCellEventTrap-06-0e TRAP-TYPE -- CAC Code: 96
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601550{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:16.773182+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV200V6-MIB
sCellEventTrap-06-0e TRAP-TYPE -- CAC Code: 96
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed."
--#TYPE "StorageCell Event 060e9613"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601550{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:40.557296+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV-MIB
sCellEventTrap-06-0e TRAP-TYPE -- CAC Code: 96
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601550{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:41.025282+00:00.
Status in source: unspecified.
Names: sCellEventTrap_6_e
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap_6_e",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed. The identity of the affected Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, bay, fed_class and num_times field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.\"",
"::=",
"13601550"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed. The identity of the affected Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, bay, fed_class and num_times field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
],
null
]
}Module: CPQHSV110V3-MIB
sCellEventTrap_6_e TRAP-TYPE -- CAC Code: 96
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed. The identity of the affected Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, bay, fed_class and num_times field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601550{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:08.860954+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV110V3-MIB
sCellEventTrap_6_e TRAP-TYPE -- CAC Code: 96
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit requested a code update but the code update could not be found, so the update was not performed. The identity of the affected Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the Drive Enclosure Environmental Monitoring Unit is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the Drive Enclosure Environmental Monitoring Unit is contained in the rack_num and dencl_num fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, bay, fed_class and num_times field is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601550{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:41.221277+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.0.13602361 | sCellEventTrap_9_39, sCellEventTrap-09-39 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602362 | sCellEventTrap_9_3a, sCellEventTrap-09-3a | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602363 | sCellEventTrap_9_3b, sCellEventTrap-09-3b | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602364 | sCellEventTrap_9_3c, sCellEventTrap-09-3c | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602365 | sCellEventTrap_9_3d, sCellEventTrap-09-3d | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602366 | sCellEventTrap_9_3e, sCellEventTrap-09-3e | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602367 | sCellEventTrap_9_3f, sCellEventTrap-09-3f | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602368 | sCellEventTrap_9_40, sCellEventTrap-09-40 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602369 | sCellEventTrap_9_41, sCellEventTrap-09-41 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602371 | sCellEventTrap_9_43, sCellEventTrap-09-43 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602372 | sCellEventTrap_9_44, sCellEventTrap-09-44 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602373 | sCellEventTrap_9_45, sCellEventTrap-09-45 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602374 | sCellEventTrap_9_46, sCellEventTrap-09-46 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602375 | sCellEventTrap_9_47, sCellEventTrap-09-47 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602376 | sCellEventTrap_9_48, sCellEventTrap-09-48 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602377 | sCellEventTrap_9_49, sCellEventTrap-09-49 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602378 | sCellEventTrap-09-4a | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602379 | sCellEventTrap-09-4b | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602380 | sCellEventTrap-09-4c | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602381 | sCellEventTrap-09-4d | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602382 | sCellEventTrap-09-4e | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602383 | sCellEventTrap-09-4f | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602384 | sCellEventTrap-09-50 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602385 | sCellEventTrap-09-51 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602386 | sCellEventTrap-09-52 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602405 | sCellEventTrap_9_65, sCellEventTrap-09-65 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602406 | sCellEventTrap_9_66, sCellEventTrap-09-66 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602407 | sCellEventTrap_9_67, sCellEventTrap-09-67 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602408 | sCellEventTrap_9_68, sCellEventTrap-09-68 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602409 | sCellEventTrap_9_69, sCellEventTrap-09-69 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602410 | sCellEventTrap_9_6a, sCellEventTrap-09-6a | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602411 | sCellEventTrap_9_6b, sCellEventTrap-09-6b | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602412 | sCellEventTrap_9_6c, sCellEventTrap-09-6c | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602413 | sCellEventTrap_9_6d, sCellEventTrap-09-6d | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602414 | sCellEventTrap_9_6e, sCellEventTrap-09-6e | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602416 | sCellEventTrap_9_70, sCellEventTrap-09-70 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602417 | sCellEventTrap_9_71, sCellEventTrap-09-71 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602418 | sCellEventTrap_9_72, sCellEventTrap-09-72 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602419 | sCellEventTrap_9_73, sCellEventTrap-09-73 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602420 | sCellEventTrap_9_74, sCellEventTrap-09-74 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602421 | sCellEventTrap_9_75, sCellEventTrap-09-75 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602422 | sCellEventTrap_9_76, sCellEventTrap-09-76 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602423 | sCellEventTrap_9_77, sCellEventTrap-09-77 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602424 | sCellEventTrap_9_78, sCellEventTrap-09-78 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602425 | sCellEventTrap_9_79, sCellEventTrap-09-79 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602426 | sCellEventTrap_9_7a, sCellEventTrap-09-7a | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602427 | sCellEventTrap-09-7b | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602428 | sCellEventTrap-09-7c | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602429 | sCellEventTrap-09-7d | 0 | 0 | |
| 1.3.6.1.4.1.232.0.13602430 | sCellEventTrap-09-7e | 0 | 0 |