{1 3 6 1 4 1 232 0 13601551}
Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV210 controller is unable to communicate with that physical disk drive on the Fibre Channel bus.
Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV110 controller is unable to communicate with that physical disk drive on the Fibre Channel bus. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.
Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV200 controller is unable to communicate with that physical disk drive on the Fibre Channel bus.
Status in source: unspecified.
Names: sCellEventTrap-06-0f
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap-06-0f",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV210 controller is unable to communicate with that physical disk drive on the Fibre Channel bus.\"",
"::=",
"13601551"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV210 controller is unable to communicate with that physical disk drive on the Fibre Channel bus."
],
null
]
}Module: CPQHSV-MIB
sCellEventTrap-06-0f TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV210 controller is unable to communicate with that physical disk drive on the Fibre Channel bus."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601551{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:16.773182+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV-MIB
sCellEventTrap-06-0f TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV210 controller is unable to communicate with that physical disk drive on the Fibre Channel bus."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601551{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:41.025282+00:00.
Status in source: unspecified.
Names: sCellEventTrap_6_f
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap_6_f",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV110 controller is unable to communicate with that physical disk drive on the Fibre Channel bus. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.\"",
"::=",
"13601551"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV110 controller is unable to communicate with that physical disk drive on the Fibre Channel bus. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
],
null
]
}Module: CPQHSV110V3-MIB
sCellEventTrap_6_f TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV110 controller is unable to communicate with that physical disk drive on the Fibre Channel bus. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601551{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:08.860954+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV110V3-MIB
sCellEventTrap_6_f TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV110 controller is unable to communicate with that physical disk drive on the Fibre Channel bus. The identity of the Drive Enclosure Environmental Monitoring Unit is contained in the device field. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is contained in the rack_num, dencl_num, and bay fields. Note that the content of the rack_num field will not be valid until a future release. Note also that in this case the content of the al_pa, fed_class and num_times fields is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601551{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:41.221277+00:00.
Status in source: unspecified.
Names: sCellEventTrap-06-0f
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap-06-0f",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV200 controller is unable to communicate with that physical disk drive on the Fibre Channel bus.\"",
"::=",
"13601551"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV200 controller is unable to communicate with that physical disk drive on the Fibre Channel bus."
],
null
]
}Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV200V6-MIB
sCellEventTrap-06-0f TRAP-TYPE -- CAC Code: 40
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. The Drive Enclosure Environmental Monitoring Unit is able to communicate with a physical disk drive but this HSV200 controller is unable to communicate with that physical disk drive on the Fibre Channel bus."
--#TYPE "StorageCell Event 060f4013"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601551{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:40.557296+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.0.22079 | cpqRackInformationalWSMANTrap | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22080 | cpqRackMinorWSMANTrap | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22081 | cpqRackMajorWSMANTrap | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22082 | cpqRackCriticalWSMANTrap | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22083 | cpqRackEnclosureManagerLinkDown | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22084 | cpqRackEnclosureManagerLinkUp | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22085 | cpqRackErsCommFailure | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22086 | cpqRackPowerSubsystemOverloadConditionRepaired | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22087 | cpqRackPowerSubsystemRedundancyOk | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22088 | cpqRackNetConnectorTempDegraded | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22089 | cpqRackNetConnectorTempOk | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22090 | cpqRackEnvironmentalLeakDetected | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22091 | cpqRackEnvironmentalDoorState | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22092 | cpqRackEnvironmentalAirTempSensor | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22093 | cpqRackEnvironmentalControlValveStatus | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22094 | cpqRackEnvironmentalWaterTempThresholdExceeded | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22095 | cpqRackEnvironmentalFlowSensorStatus | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22096 | cpqRackEnvironmentalWaterPressureThresholdExceeded | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22097 | cpqRackEnvironmentalAutomaticRapidPowerOff | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22098 | cpqRackEnvironmentalRopeLeakDetectorEvent | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22099 | cpqRackEnvironmentalTemperatureThresholdExceeded | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22100 | cpqRackEnvironmentalHumidityThresholdExceeded | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22101 | cpqRackEnvironmentalControllerOnBoardBattery | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22102 | cpqRackEnvironmentalControllerAPMCommunicationFailure | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22103 | cpqRackEnvironmentalLeakDetectedCritical | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22104 | cpqRackPowerSubsystemReductionModeActivate | 0 | 0 | |
| 1.3.6.1.4.1.232.0.22105 | cpqRackPowerSubsystemReductionModeDeactivate | 0 | 0 | |
| 1.3.6.1.4.1.232.0.23001 | cpqNodeTemperatureDegraded | 0 | 0 | |
| 1.3.6.1.4.1.232.0.23002 | cpqNodeTemperatureOk | 0 | 0 | |
| 1.3.6.1.4.1.232.0.23003 | cpqNodeTemperatureFailed | 0 | 0 | |
| 1.3.6.1.4.1.232.0.23004 | cpqNodeErrorEvent | 0 | 0 | |
| 1.3.6.1.4.1.232.0.23010 | cpqNodePowerOn | 0 | 0 | |
| 1.3.6.1.4.1.232.0.23011 | cpqNodePowerOff | 0 | 0 | |
| 1.3.6.1.4.1.232.0.99999 | cpqGenericUnregistered | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136001 | emuEventTrapInformative | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136002 | emuEventTrapNoncritical | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136003 | emuEventTrapCritical | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136004 | emuEventTrapUnrecoverable | 0 | 0 | |
| 1.3.6.1.4.1.232.0.140001 | cpqICAAdd | 0 | 0 | |
| 1.3.6.1.4.1.232.0.140002 | cpqICADelete | 0 | 0 | |
| 1.3.6.1.4.1.232.0.140003 | cpqICAPropertyChange | 0 | 0 | |
| 1.3.6.1.4.1.232.0.140004 | cpqICAMove | 0 | 0 | |
| 1.3.6.1.4.1.232.0.140005 | cpqICAImportRestoreStart | 0 | 0 | |
| 1.3.6.1.4.1.232.0.140006 | cpqICAImportRestoreEnd | 0 | 0 | |
| 1.3.6.1.4.1.232.0.150001 | cpqDMIIndicationInfo | 0 | 0 | |
| 1.3.6.1.4.1.232.0.150002 | cpqDMIIndicationMonitor | 0 | 0 | |
| 1.3.6.1.4.1.232.0.150003 | cpqDMIIndicationOK | 0 | 0 | |
| 1.3.6.1.4.1.232.0.150004 | cpqDMIIndicationNonCritical | 0 | 0 | |
| 1.3.6.1.4.1.232.0.150005 | cpqDMIIndicationCritical | 0 | 0 | |
| 1.3.6.1.4.1.232.0.150006 | cpqDMIIndicationNonNonRecoverable | 0 | 0 |