{1 3 6 1 4 1 232 0 13601573}
Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop.
Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The al_pa field contains the expected AL_PA, and the num_times field contains the actual AL_PA. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that in this case the content of the fed_class is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.
Status in source: unspecified.
Names: sCellEventTrap-06-25
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap-06-25",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop.\"",
"::=",
"13601573"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop."
],
null
]
}Module: CPQHSV-MIB
sCellEventTrap-06-25 TRAP-TYPE -- CAC Code: 43
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601573{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:16.773182+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV200V6-MIB
sCellEventTrap-06-25 TRAP-TYPE -- CAC Code: 43
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop."
--#TYPE "StorageCell Event 06254313"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601573{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:40.557296+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV-MIB
sCellEventTrap-06-25 TRAP-TYPE -- CAC Code: 43
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601573{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Downloaded: 2026-10-23T19:25:41.025282+00:00.
Status in source: unspecified.
Names: sCellEventTrap_6_25
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap_6_25",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The al_pa field contains the expected AL_PA, and the num_times field contains the actual AL_PA. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that in this case the content of the fed_class is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.\"",
"::=",
"13601573"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The al_pa field contains the expected AL_PA, and the num_times field contains the actual AL_PA. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that in this case the content of the fed_class is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
],
null
]
}Module: CPQHSV110V3-MIB
sCellEventTrap_6_25 TRAP-TYPE -- CAC Code: 43
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The al_pa field contains the expected AL_PA, and the num_times field contains the actual AL_PA. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that in this case the content of the fed_class is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601573{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:08.860954+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV110V3-MIB
sCellEventTrap_6_25 TRAP-TYPE -- CAC Code: 43
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Critical -- failure or failure imminent. A Drive Enclosure Environmental Monitoring Unit has failed to assign a hard address to a physical disk drive on the loop. The device field contains the identity of the enclosure. The Fibre Channel port used to communicate with the physical disk drive is contained in the cerp_id field. The HSV110 controller internal Fibre Channel port number used to communicate with the physical disk drive is contained in the port field. The al_pa field contains the expected AL_PA, and the num_times field contains the actual AL_PA. The missing_port and missing_cerp_id fields are unused. The location of the physical disk drive is determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num, dencl_num, and bay fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num and bay fields is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num, dencl_num, and bay fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. The identity contained in the device field should be used to confirm the last known location values. </UL>Note that the content of the rack_num field will not be valid until a future release. Note that in this case the content of the fed_class is undefined. The enclosures array shows the drive enclosures available on the Fibre Channel port identified in the cerp_id field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY CRITICAL
--#TIMEINDEX 136
--#STATE WARNING
::= 13601573{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Downloaded: 2026-10-23T19:25:41.221277+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.0.136025001 | mngmtAgentTrap_25001, mngmtAgentTrap-25001 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025002 | mngmtAgentTrap_25002, mngmtAgentTrap-25002 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025003 | mngmtAgentTrap_25003, mngmtAgentTrap-25003 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025004 | mngmtAgentTrap_25004, mngmtAgentTrap-25004 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025005 | mngmtAgentTrap_25005, mngmtAgentTrap-25005 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025006 | mngmtAgentTrap_25006, mngmtAgentTrap-25006 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025007 | mngmtAgentTrap_25007, mngmtAgentTrap-25007 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025008 | mngmtAgentTrap_25008, mngmtAgentTrap-25008 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025009 | mngmtAgentTrap_25009, mngmtAgentTrap-25009 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025010 | mngmtAgentTrap_25010, mngmtAgentTrap-25010 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025011 | mngmtAgentTrap_25011, mngmtAgentTrap-25011 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025012 | mngmtAgentTrap_25012, mngmtAgentTrap-25012 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025013 | mngmtAgentTrap_25013, mngmtAgentTrap-25013 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025014 | mngmtAgentTrap_25014, mngmtAgentTrap-25014 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025015 | mngmtAgentTrap_25015, mngmtAgentTrap-25015 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025016 | mngmtAgentTrap_25016, mngmtAgentTrap-25016 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025017 | mngmtAgentTrap_25017, mngmtAgentTrap-25017 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025018 | mngmtAgentTrap_25018, mngmtAgentTrap-25018 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136025019 | mngmtAgentTrap_25019, mngmtAgentTrap-25019 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026002 | mngmtAgentTrap_26002, mngmtAgentTrap-26002 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026005 | mngmtAgentTrap_26005, mngmtAgentTrap-26005 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026006 | mngmtAgentTrap_26006, mngmtAgentTrap-26006 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026007 | mngmtAgentTrap_26007, mngmtAgentTrap-26007 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026008 | mngmtAgentTrap_26008, mngmtAgentTrap-26008 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026009 | mngmtAgentTrap_26009, mngmtAgentTrap-26009 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026010 | mngmtAgentTrap_26010, mngmtAgentTrap-26010 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026011 | mngmtAgentTrap_26011, mngmtAgentTrap-26011 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026012 | mngmtAgentTrap_26012, mngmtAgentTrap-26012 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026013 | mngmtAgentTrap_26013, mngmtAgentTrap-26013 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026014 | mngmtAgentTrap_26014, mngmtAgentTrap-26014 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026015 | mngmtAgentTrap_26015, mngmtAgentTrap-26015 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026016 | mngmtAgentTrap_26016, mngmtAgentTrap-26016 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026017 | mngmtAgentTrap-26017 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026018 | mngmtAgentTrap-26018 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026019 | mngmtAgentTrap-26019 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026020 | mngmtAgentTrap-26020 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026021 | mngmtAgentTrap-26021 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026022 | mngmtAgentTrap-26022 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026023 | mngmtAgentTrap-26023 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026024 | mngmtAgentTrap-26024 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026025 | mngmtAgentTrap-26025 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026026 | mngmtAgentTrap-26026 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026027 | mngmtAgentTrap-26027 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136026028 | mngmtAgentTrap-26028 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136027001 | mngmtAgentTrap_27001, mngmtAgentTrap-27001 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136027002 | mngmtAgentTrap_27002, mngmtAgentTrap-27002 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136027003 | mngmtAgentTrap_27003, mngmtAgentTrap-27003 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136027004 | mngmtAgentTrap_27004, mngmtAgentTrap-27004 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136027005 | mngmtAgentTrap_27005, mngmtAgentTrap-27005 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136027006 | mngmtAgentTrap_27006, mngmtAgentTrap-27006 | 0 | 0 |