{1 3 6 1 4 1 232 0 13603379}
Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. Note that the remaining power supply has become a single point of failure.
Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. This makes the remaining power supply a single point of failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.
Status in source: unspecified.
Names: sCellEventTrap-0d-33
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap-0d-33",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. Note that the remaining power supply has become a single point of failure.\"",
"::=",
"13603379"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. Note that the remaining power supply has become a single point of failure."
],
null
]
}Module: CPQHSV-MIB
sCellEventTrap-0d-33 TRAP-TYPE -- CAC Code: 09
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. Note that the remaining power supply has become a single point of failure."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603379{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:16.773182+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV200V6-MIB
sCellEventTrap-0d-33 TRAP-TYPE -- CAC Code: 09
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. Note that the remaining power supply has become a single point of failure."
--#TYPE "StorageCell Event 0d330911"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603379{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Related source files and packages:
Downloaded: 2026-10-23T19:25:40.557296+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV-MIB
sCellEventTrap-0d-33 TRAP-TYPE -- CAC Code: 09
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. Note that the remaining power supply has become a single point of failure."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603379{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Downloaded: 2026-10-23T19:25:41.025282+00:00.
Status in source: unspecified.
Names: sCellEventTrap_d_33
{
"smi_kind": "TRAP-TYPE",
"definition": [
"sCellEventTrap_d_33",
"TRAP-TYPE",
"ENTERPRISE",
"compaq",
"VARIABLES",
"{",
"scellNameDateTime",
",",
"scellSWComponent",
",",
"scellECode",
",",
"scellCAC",
",",
"scellEIP",
"}",
"DESCRIPTION",
"\"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. This makes the remaining power supply a single point of failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release.\"",
"::=",
"13603379"
],
"syntax_tree": [
[
"objectIdentifier",
[
"compaq"
]
],
[
"VarTypes",
[
"scellNameDateTime",
"scellSWComponent",
"scellECode",
"scellCAC",
"scellEIP"
]
],
[
"DESCRIPTION",
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. This makes the remaining power supply a single point of failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
],
null
]
}Module: CPQHSV110V3-MIB
sCellEventTrap_d_33 TRAP-TYPE -- CAC Code: 9
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. This makes the remaining power supply a single point of failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603379{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Archived: 2026-10-19T00:22:08.860954+00:00.
Vendor MIB copy from the Observium Community archive. HPE networking support.
Module: CPQHSV110V3-MIB
sCellEventTrap_d_33 TRAP-TYPE -- CAC Code: 9
ENTERPRISE compaq
VARIABLES { scellNameDateTime,
scellSWComponent,
scellECode,
scellCAC,
scellEIP}
DESCRIPTION
"Severity: Warning -- not failed but attention recommended or required. The AC input to a drive enclosure power supply has been lost. This makes the remaining power supply a single point of failure. The handle field contains the WWN of the drive enclosure containing the Drive Enclosure Environmental Monitoring Unit. This problem was detected by the Drive Enclosure Environmental Monitoring Unit located in the drive enclosure determined by the content of the dencl_num field as follows: <UL><LI>If dencl_num is less than 99, the location is as indicated by the content of the rack_num and dencl_num fields. <LI>If dencl_num is equal to 99, the location is unknown. Note that the content of the rack_num field is undefined in this case. <LI>If dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the rack_num and dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the rack_num field will not be valid until a future release. The location of the affected power supply (1 or 2) is identified in the alarm_error_code.field.en field. The enclosures array shows the drive enclosures available on the Fibre Channel loop pair (0 = Loop A, 1 = Loop B) identified in the loop field. The location of an available drive enclosure is determined by the content of the enclosures.dencl_num field as follows: <UL><LI>If enclosures.dencl_num is less than 99, the location is as indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. <LI>If enclosures.dencl_num is equal to 99, the enclosures array entry is not used. Note that the content of the enclosures.rack_num field is undefined in this case. <LI>If enclosures.dencl_num is greater than 99, the HSV110 controller does not have proof of the current location but the last known location is indicated by the content of the enclosures.rack_num and enclosures.dencl_num fields. Subtract 100 from the content of those fields to determine the actual last known location. If there have been no configuration changes, the last known location values will be accurate. </UL>Note that the content of the enclosures.rack_num field will not be valid until a future release."
--#TYPE "StorageCell Event"
--#SUMMARY "SCellName-TimeDate %s : SWCID %d : ECode: %d : CAC %d : EIP %d."
--#ARGUMENTS {0,1,2,3,4,}
--#SEVERITY MINOR
--#TIMEINDEX 136
--#STATE WARNING
::= 13603379{'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['DisplayString']}Downloaded: 2026-10-23T19:25:41.221277+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.232.0.136008028 | mngmtAgentTrap_8028, mngmtAgentTrap-8028 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008029 | mngmtAgentTrap_8029, mngmtAgentTrap-8029 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008030 | mngmtAgentTrap_8030, mngmtAgentTrap-8030 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008031 | mngmtAgentTrap_8031, mngmtAgentTrap-8031 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008032 | mngmtAgentTrap_8032, mngmtAgentTrap-8032 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008033 | mngmtAgentTrap_8033, mngmtAgentTrap-8033 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008034 | mngmtAgentTrap_8034, mngmtAgentTrap-8034 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008035 | mngmtAgentTrap_8035, mngmtAgentTrap-8035 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008036 | mngmtAgentTrap_8036, mngmtAgentTrap-8036 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008037 | mngmtAgentTrap_8037, mngmtAgentTrap-8037 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008038 | mngmtAgentTrap_8038, mngmtAgentTrap-8038 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008039 | mngmtAgentTrap_8039, mngmtAgentTrap-8039 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008040 | mngmtAgentTrap_8040, mngmtAgentTrap-8040 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008041 | mngmtAgentTrap_8041, mngmtAgentTrap-8041 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008042 | mngmtAgentTrap_8042, mngmtAgentTrap-8042 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008043 | mngmtAgentTrap_8043, mngmtAgentTrap-8043 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008044 | mngmtAgentTrap_8044, mngmtAgentTrap-8044 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008045 | mngmtAgentTrap_8045, mngmtAgentTrap-8045 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008046 | mngmtAgentTrap_8046, mngmtAgentTrap-8046 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008047 | mngmtAgentTrap_8047, mngmtAgentTrap-8047 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008048 | mngmtAgentTrap_8048, mngmtAgentTrap-8048 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008049 | mngmtAgentTrap_8049, mngmtAgentTrap-8049 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008050 | mngmtAgentTrap_8050, mngmtAgentTrap-8050 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008051 | mngmtAgentTrap_8051, mngmtAgentTrap-8051 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008052 | mngmtAgentTrap_8052, mngmtAgentTrap-8052 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008053 | mngmtAgentTrap_8053, mngmtAgentTrap-8053 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008054 | mngmtAgentTrap_8054, mngmtAgentTrap-8054 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008055 | mngmtAgentTrap_8055, mngmtAgentTrap-8055 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008056 | mngmtAgentTrap_8056, mngmtAgentTrap-8056 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008057 | mngmtAgentTrap_8057, mngmtAgentTrap-8057 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008058 | mngmtAgentTrap_8058, mngmtAgentTrap-8058 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008059 | mngmtAgentTrap_8059, mngmtAgentTrap-8059 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008060 | mngmtAgentTrap_8060, mngmtAgentTrap-8060 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008061 | mngmtAgentTrap_8061, mngmtAgentTrap-8061 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008062 | mngmtAgentTrap_8062, mngmtAgentTrap-8062 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008063 | mngmtAgentTrap_8063, mngmtAgentTrap-8063 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008064 | mngmtAgentTrap_8064, mngmtAgentTrap-8064 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008065 | mngmtAgentTrap_8065, mngmtAgentTrap-8065 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008066 | mngmtAgentTrap_8066, mngmtAgentTrap-8066 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008067 | mngmtAgentTrap_8067, mngmtAgentTrap-8067 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008068 | mngmtAgentTrap_8068, mngmtAgentTrap-8068 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008069 | mngmtAgentTrap_8069, mngmtAgentTrap-8069 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008070 | mngmtAgentTrap_8070, mngmtAgentTrap-8070 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008071 | mngmtAgentTrap_8071, mngmtAgentTrap-8071 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008073 | mngmtAgentTrap_8073, mngmtAgentTrap-8073 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008074 | mngmtAgentTrap_8074, mngmtAgentTrap-8074 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008075 | mngmtAgentTrap_8075, mngmtAgentTrap-8075 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008076 | mngmtAgentTrap_8076, mngmtAgentTrap-8076 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008077 | mngmtAgentTrap_8077, mngmtAgentTrap-8077 | 0 | 0 | |
| 1.3.6.1.4.1.232.0.136008078 | mngmtAgentTrap_8078, mngmtAgentTrap-8078 | 0 | 0 |