Reference record for OID 1.3.6.1.4.1.232.0.18002

cpqNicConnectivityLost

Status in source: unspecified.

Names: cpqNicConnectivityLost

{
  "smi_kind": "TRAP-TYPE",
  "definition": [
    "cpqNicConnectivityLost",
    "TRAP-TYPE",
    "ENTERPRISE",
    "compaq",
    "VARIABLES",
    "{",
    "sysName",
    ",",
    "cpqHoTrapFlags",
    ",",
    "cpqNicIfPhysAdapterSlot",
    ",",
    "cpqNicIfPhysAdapterPort",
    "}",
    "DESCRIPTION",
    "\"This trap will be sent any time the status of a logical adapter changes to the Failed condition. This occurs when the adapter in a single adapter configuration fails, or when the last adapter in a redundant configuration fails. This can be caused by loss of link due to a cable being removed from the adapter or the Hub or Switch. Internal adapter, Hub, or Switch failures can also cause this condition. User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement.\"",
    "::=",
    "18002"
  ],
  "syntax_tree": [
    [
      "objectIdentifier",
      [
        "compaq"
      ]
    ],
    [
      "VarTypes",
      [
        "sysName",
        "cpqHoTrapFlags",
        "cpqNicIfPhysAdapterSlot",
        "cpqNicIfPhysAdapterPort"
      ]
    ],
    [
      "DESCRIPTION",
      "This trap will be sent any time the status of a logical adapter changes to the Failed condition. This occurs when the adapter in a single adapter configuration fails, or when the last adapter in a redundant configuration fails. This can be caused by loss of link due to a cable being removed from the adapter or the Hub or Switch. Internal adapter, Hub, or Switch failures can also cause this condition. User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement."
    ],
    null
  ]
}

• Preserved mibdepot archive

  Module: CPQNIC-MIB

  Published definition

  cpqNicConnectivityLost TRAP-TYPE
          ENTERPRISE compaq
          VARIABLES { sysName, cpqHoTrapFlags, cpqNicIfPhysAdapterSlot,
                      cpqNicIfPhysAdapterPort }
          DESCRIPTION
              "This trap will be sent any time the status of a logical
               adapter changes to the Failed condition.  This occurs
               when the adapter in a single adapter configuration fails,
               or when the last adapter in a redundant configuration fails.
  
               This can be caused by loss of link due to a cable being
               removed from the adapter or the Hub or Switch.  Internal
               adapter, Hub, or Switch failures can also cause this
               condition.
  
               User Action: Check the cables to the adapter and the Hub or
               Switch.  If no cable problems are found, the adapter, Hub,
               or Switch may need replacement."
  
               --#TYPE "Status Trap"
               --#SUMMARY "Connectivity lost for adapter in slot %s, port %s."
               --#ARGUMENTS {2, 3}
               --#SEVERITY MAJOR
               --#TIMEINDEX 18
          ::= 18002

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['compaq', 'cpqHoTrapFlags'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString', 'sysName']}

  · Download Cpqnic.mib.txt
  Source location: CPQNIC-MIB::cpqNicConnectivityLost.
  Source version and references

  Archived: 2026-10-19T00:22:07.818687+00:00.

• Preserved mibdepot archive

  Module: CPQNIC-MIB

  Published definition

  cpqNicConnectivityLost TRAP-TYPE
          ENTERPRISE compaq
          VARIABLES { sysName, cpqHoTrapFlags, cpqNicIfPhysAdapterSlot,
                      cpqNicIfPhysAdapterPort }
          DESCRIPTION
              "This trap will be sent any time the status of a logical
               adapter changes to the Failed condition.  This occurs
               when the adapter in a single adapter configuration fails,
               or when the last adapter in a redundant configuration fails.
  
               This can be caused by loss of link due to a cable being
               removed from the adapter or the Hub or Switch.  Internal
               adapter, Hub, or Switch failures can also cause this
               condition.
  
               User Action: Check the cables to the adapter and the Hub or
               Switch.  If no cable problems are found, the adapter, Hub,
               or Switch may need replacement."
  
               --#TYPE "NIC Status Trap (18002)"
               --#SUMMARY "Connectivity lost for adapter in slot %d, port %d."
               --#ARGUMENTS {2, 3}
               --#SEVERITY MAJOR
               --#TIMEINDEX 99
               --#STATE DEGRADED
          ::= 18002

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['compaq', 'cpqHoTrapFlags'], 'RFC1155-SMI': ['Counter', 'Gauge', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'sysName', 'ipAdEntAddr'], 'CPQSINFO-MIB': ['cpqSiServerSystemId'], 'CPQSTDEQ-MIB': ['cpqSePciSlotBoardName']}

  · Download CPQNIC.MIB.txt
  Source location: CPQNIC-MIB::cpqNicConnectivityLost.
  Source version and references

  Archived: 2026-10-19T00:22:08.785287+00:00.

• Preserved mibdepot archive

  Module: CPQNIC-MIB

  Published definition

  cpqNicConnectivityLost TRAP-TYPE
          ENTERPRISE compaq
          VARIABLES { sysName, cpqHoTrapFlags, cpqNicIfPhysAdapterSlot,
                      cpqNicIfPhysAdapterPort }
          DESCRIPTION
              "This trap will be sent any time the status of a logical
               adapter changes to the Failed condition.  This occurs
               when the adapter in a single adapter configuration fails,
               or when the last adapter in a redundant configuration fails.
  
               This can be caused by loss of link due to a cable being
               removed from the adapter or the Hub or Switch.  Internal
               adapter, Hub, or Switch failures can also cause this
               condition.
  
               User Action: Check the cables to the adapter and the Hub or
               Switch.  If no cable problems are found, the adapter, Hub,
               or Switch may need replacement."
  
               --#TYPE "NIC Status Trap"
               --#SUMMARY "Connectivity lost for adapter in slot %d, port %d."
               --#ARGUMENTS {2, 3}
               --#SEVERITY MAJOR
               --#TIMEINDEX 99
               --#STATE DEGRADED
          ::= 18002

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['compaq', 'cpqHoTrapFlags'], 'RFC1155-SMI': ['Counter', 'Gauge'], 'RFC1213-MIB': ['DisplayString', 'sysName', 'ipAdEntAddr'], 'CPQSINFO-MIB': ['cpqSiServerSystemId'], 'CPQSTDEQ-MIB': ['cpqSePciSlotBoardName']}

  · Download CPQNIC1.MIB.txt
  Source location: CPQNIC-MIB::cpqNicConnectivityLost.
  Source version and references

  Archived: 2026-10-19T00:22:08.785752+00:00.

• Preserved circitor archive

  Module: CPQNIC-MIB

  Published definition

  cpqNicConnectivityLost TRAP-TYPE
          ENTERPRISE compaq
          VARIABLES { sysName, cpqHoTrapFlags, cpqNicIfPhysAdapterSlot,
                      cpqNicIfPhysAdapterPort }
          DESCRIPTION
              "This trap will be sent any time the status of a logical
               adapter changes to the Failed condition.  This occurs
               when the adapter in a single adapter configuration fails,
               or when the last adapter in a redundant configuration fails.
  
               This can be caused by loss of link due to a cable being
               removed from the adapter or the Hub or Switch.  Internal
               adapter, Hub, or Switch failures can also cause this
               condition.
  
               User Action: Check the cables to the adapter and the Hub or
               Switch.  If no cable problems are found, the adapter, Hub,
               or Switch may need replacement."
  
               --#TYPE "NIC Status Trap (18002)"
               --#SUMMARY "Connectivity lost for adapter in slot %d, port %d."
               --#ARGUMENTS {2, 3}
               --#SEVERITY MAJOR
               --#TIMEINDEX 99
               --#STATE DEGRADED
          ::= 18002

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['compaq', 'cpqHoTrapFlags'], 'RFC1155-SMI': ['Counter', 'Gauge', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'sysName', 'ipAdEntAddr'], 'CPQSINFO-MIB': ['cpqSiServerSystemId'], 'CPQSTDEQ-MIB': ['cpqSePciSlotBoardName']}

  · Download CPQNIC-MIB.mib
  Source location: CPQNIC-MIB::cpqNicConnectivityLost.
  Source version and references

  Archived: 2026-10-19T00:22:16.786453+00:00.

• HPE networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. HPE networking support.

  Module: CPQNIC-MIB

  Published definition

  cpqNicConnectivityLost TRAP-TYPE
          ENTERPRISE compaq
          VARIABLES { sysName, cpqHoTrapFlags, cpqNicIfPhysAdapterSlot,
                      cpqNicIfPhysAdapterPort }
          DESCRIPTION
              "This trap will be sent any time the status of a logical
               adapter changes to the Failed condition.  This occurs
               when the adapter in a single adapter configuration fails,
               or when the last adapter in a redundant configuration fails.
  
               This can be caused by loss of link due to a cable being
               removed from the adapter or the Hub or Switch.  Internal
               adapter, Hub, or Switch failures can also cause this
               condition.
  
               User Action: Check the cables to the adapter and the Hub or
               Switch.  If no cable problems are found, the adapter, Hub,
               or Switch may need replacement."
  
               --#TYPE "NIC Status Trap (18002)"
               --#SUMMARY "Connectivity lost for adapter in slot %d, port %d."
               --#ARGUMENTS {2, 3}
               --#SEVERITY MAJOR
               --#TIMEINDEX 99
               --#STATE DEGRADED
               --#SIMPLE_SEVERITY MAJOR
               --#HWSTATUS_CATEGORY NETWORK
               --#ACTION "Check the cables to the adapter and the Hub or Switch.  If no cable problems are found, the adapter, Hub, or Switch may need replacement."
                            
          ::= 18002

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['compaq', 'cpqHoTrapFlags'], 'RFC1155-SMI': ['Counter', 'Gauge', 'TimeTicks'], 'RFC1213-MIB': ['DisplayString', 'sysName', 'ipAdEntAddr'], 'CPQSINFO-MIB': ['cpqSiServerSystemId'], 'CPQSTDEQ-MIB': ['cpqSePciSlotBoardName']}

  · Download CPQNIC-MIB

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: CPQNIC-MIB::cpqNicConnectivityLost.
  Source version and references

  Downloaded: 2026-10-23T19:25:41.096280+00:00.

• Preserved mibdepot archive

  Module: CPQNIC-MIB

  Published definition

  cpqNicConnectivityLost TRAP-TYPE
          ENTERPRISE compaq
          VARIABLES { sysName, cpqHoTrapFlags, cpqNicIfPhysAdapterSlot,
                      cpqNicIfPhysAdapterPort }
          DESCRIPTION
              "This trap will be sent any time the status of a logical
               adapter changes to the Failed condition.  This occurs
               when the adapter in a single adapter configuration fails,
               or when the last adapter in a redundant configuration fails.
  
               This can be caused by loss of link due to a cable being
               removed from the adapter or the Hub or Switch.  Internal
               adapter, Hub, or Switch failures can also cause this
               condition.
  
               User Action: Check the cables to the adapter and the Hub or
               Switch.  If no cable problems are found, the adapter, Hub,
               or Switch may need replacement."
  
               --#TYPE "Status Trap"
               --#SUMMARY "Connectivity lost for adapter in slot %s, port %s."
               --#ARGUMENTS {2, 3}
               --#SEVERITY MAJOR
               --#TIMEINDEX 18
          ::= 18002

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['cpqHoTrapFlags'], 'RFC1155-SMI': ['Counter'], 'RFC1213-MIB': ['DisplayString', 'sysName']}

  Source data warning: This historical publication omits an explicitly reviewed standard root import. Exact original declarations and all numeric values are retained; the referenced RFC and IANA allocation establish only the missing standard namespace.

  · Download Compaq-Nic.mib.txt

  Related source files and packages:

  • RFC 1155 — imported RFC1155-SMI namespaceFile: rfc/rfc1155.txt; 39,693 bytes
  • IANA Private Enterprise Numbers registryFile: assignments/enterprise-numbers/enterprise-numbers; 4.9 MiB
  
  Source location: CPQNIC-MIB::cpqNicConnectivityLost.
  Source version and references

  Archived: 2026-10-19T00:22:08.801046+00:00.