Reference record for OID 1.3.6.1.4.1.232.6.2.20.2.1.7

cpqHePowerFailureRepairSteps

Status in source: mandatory.

Names: cpqHePowerFailureRepairSteps

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "cpqHePowerFailureRepairSteps",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "noError",
    "(",
    "1",
    ")",
    ",",
    "systemBoardRpMsg1",
    "(",
    "2",
    ")",
    ",",
    "processorRpMsg1",
    "(",
    "3",
    ")",
    ",",
    "memoryRpMsg1",
    "(",
    "4",
    ")",
    ",",
    "memoryBoardRpMsg1",
    "(",
    "5",
    ")",
    ",",
    "riserCardAssemblyRpMsg1",
    "(",
    "6",
    ")",
    ",",
    "flexibleLomRpMsg1",
    "(",
    "7",
    ")",
    ",",
    "flexibleSmartArrayRpMsg1",
    "(",
    "8",
    ")",
    ",",
    "optIOPCIeSlotsRpMsg1",
    "(",
    "9",
    ")",
    ",",
    "powerBackplaneRpMsg1",
    "(",
    "10",
    ")",
    ",",
    "sasBackplaneRpMsg1",
    "(",
    "11",
    ")",
    ",",
    "powerSupplyRpMsg1",
    "(",
    "12",
    ")",
    ",",
    "mezzCardRpMsg1",
    "(",
    "13",
    ")",
    ",",
    "enclosureRpMsg1",
    "(",
    "14",
    ")",
    "}",
    "ACCESS",
    "read-only",
    "STATUS",
    "mandatory",
    "DESCRIPTION",
    "\"Recommended troubleshooting steps for a particular device error. The value will be one of the following: noError(1) No errors were detected at this time. systemBoardRpMsg1(2) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Restore the server to its base configuration. Attempt to boot the server. (3)If error persists, capture the AHS logs and contact your support representative for assistance. processorRpMsg1(3) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Processor that has an issue. Attempt to boot the server. (3) Swap the faulty Processor with a known good Processor. Attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. memoryRpMsg1(4) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall all DIMM's in the memory channel group connected to the CPU that logged the error. Attempt to boot the server. (3) Swap the first DIMM in the memory channel group with a known good DIMM. Attempt to boot the server. If the server doesn't boot, repeat step 3 by swapping each DIMM in the memory channel group, one DIMM at a time until the bad DIMM is found. (4) If error persists, capture the AHS logs and contact your support representative for assistance. memoryBoardRpMsg1(5) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove the cartridge of the Memory Board that logged the error. Open the cartridge and reseat the DIMM's. Attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. riserCardAssemblyRpMsg1(6) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Riser Board that has an issue. Attempt to boot the server. (3) Remove the Riser Board then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. flexibleLomRpMsg1(7) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible LOM that has an issue. Attempt to boot the server. (3) Remove the Flexible LOM then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. flexibleSmartArrayRpMsg1(8) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible Smart Array Controller that has an issue. Attempt to boot the server. (3) Remove the Flexible Smart Array Controller then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. optIOPCIeSlotsRpMsg1(9) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Option Card that has an issue. Attempt to boot the server. (3) Remove all Option Cards from the system. Attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. powerBackplaneRpMsg1(10) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove GPU power connects one at a time in order to isolate the bad GPU card, each time attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. sasBackplaneRpMsg1(11) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall Storage Blackplane that logged the error (including cables). Attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. powerSupplyRpMsg1(12) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Swap the first Power Supply with a known good Power supply. Attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. mezzCardRpMsg1(13) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Mezzanine Card that has an issue. Attempt to boot the server. (3) Remove the Mezzanine Card then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. enclosureRpMsg1(14) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Restore the enclosure to its base configuration. Attempt to boot the server. (2) If error persists, capture the AHS logs and contact your support representative for assistance.\"",
    "::=",
    "{",
    "cpqHePowerFailureTableEntry",
    "7",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "noError",
            1
          ],
          [
            "systemBoardRpMsg1",
            2
          ],
          [
            "processorRpMsg1",
            3
          ],
          [
            "memoryRpMsg1",
            4
          ],
          [
            "memoryBoardRpMsg1",
            5
          ],
          [
            "riserCardAssemblyRpMsg1",
            6
          ],
          [
            "flexibleLomRpMsg1",
            7
          ],
          [
            "flexibleSmartArrayRpMsg1",
            8
          ],
          [
            "optIOPCIeSlotsRpMsg1",
            9
          ],
          [
            "powerBackplaneRpMsg1",
            10
          ],
          [
            "sasBackplaneRpMsg1",
            11
          ],
          [
            "powerSupplyRpMsg1",
            12
          ],
          [
            "mezzCardRpMsg1",
            13
          ],
          [
            "enclosureRpMsg1",
            14
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "mandatory"
    ],
    [
      "DESCRIPTION",
      "Recommended troubleshooting steps for a particular device error. The value will be one of the following: noError(1) No errors were detected at this time. systemBoardRpMsg1(2) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Restore the server to its base configuration. Attempt to boot the server. (3)If error persists, capture the AHS logs and contact your support representative for assistance. processorRpMsg1(3) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Processor that has an issue. Attempt to boot the server. (3) Swap the faulty Processor with a known good Processor. Attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. memoryRpMsg1(4) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall all DIMM's in the memory channel group connected to the CPU that logged the error. Attempt to boot the server. (3) Swap the first DIMM in the memory channel group with a known good DIMM. Attempt to boot the server. If the server doesn't boot, repeat step 3 by swapping each DIMM in the memory channel group, one DIMM at a time until the bad DIMM is found. (4) If error persists, capture the AHS logs and contact your support representative for assistance. memoryBoardRpMsg1(5) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove the cartridge of the Memory Board that logged the error. Open the cartridge and reseat the DIMM's. Attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. riserCardAssemblyRpMsg1(6) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Riser Board that has an issue. Attempt to boot the server. (3) Remove the Riser Board then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. flexibleLomRpMsg1(7) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible LOM that has an issue. Attempt to boot the server. (3) Remove the Flexible LOM then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. flexibleSmartArrayRpMsg1(8) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible Smart Array Controller that has an issue. Attempt to boot the server. (3) Remove the Flexible Smart Array Controller then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. optIOPCIeSlotsRpMsg1(9) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Option Card that has an issue. Attempt to boot the server. (3) Remove all Option Cards from the system. Attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. powerBackplaneRpMsg1(10) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove GPU power connects one at a time in order to isolate the bad GPU card, each time attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. sasBackplaneRpMsg1(11) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall Storage Blackplane that logged the error (including cables). Attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. powerSupplyRpMsg1(12) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Swap the first Power Supply with a known good Power supply. Attempt to boot the server. (3) If error persists, capture the AHS logs and contact your support representative for assistance. mezzCardRpMsg1(13) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Mezzanine Card that has an issue. Attempt to boot the server. (3) Remove the Mezzanine Card then attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support representative for assistance. enclosureRpMsg1(14) Try the following steps until the error no longer occurs: (1) Remove AC power, then restore AC power. (2) Restore the enclosure to its base configuration. Attempt to boot the server. (2) If error persists, capture the AHS logs and contact your support representative for assistance."
    ],
    null,
    null,
    null,
    null
  ]
}

• HPE networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: CPQHLTH-MIB

  Vendor MIB copy from the LibreNMS archive. HPE networking support.

  Module: CPQHLTH-MIB

  Published definition

  cpqHePowerFailureRepairSteps OBJECT-TYPE
        SYNTAX  INTEGER {
           noError(1),
           systemBoardRpMsg1(2),
           processorRpMsg1(3),
           memoryRpMsg1(4),
           memoryBoardRpMsg1(5),
           riserCardAssemblyRpMsg1(6),
           flexibleLomRpMsg1(7),
           flexibleSmartArrayRpMsg1(8),
           optIOPCIeSlotsRpMsg1(9),
           powerBackplaneRpMsg1(10),
           sasBackplaneRpMsg1(11),
           powerSupplyRpMsg1(12),
           mezzCardRpMsg1(13),
           enclosureRpMsg1(14)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
           "Recommended troubleshooting steps for a particular device error.
           The value will be one of the following:
           
           noError(1)
             No errors were detected at this time.
  
           systemBoardRpMsg1(2)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Restore the server to its base 
  		   configuration. Attempt to boot the server. (3)If error persists, capture the AHS 
  		   logs and contact your support representative for assistance.
  
           processorRpMsg1(3)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Processor 
  		   that has an issue. Attempt to boot the server. (3) Swap the faulty Processor with a 
  		   known good Processor. Attempt to boot the server. (4) If error persists, capture the AHS 
  		   logs and contact your support representative for assistance.
  
  
           memoryRpMsg1(4)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall all DIMM's in 
  		   the memory channel group connected to the CPU that logged the error. Attempt to boot the 
  		   server. (3) Swap the first DIMM in the memory channel group with a known good DIMM.
  		   Attempt to boot the server.  If the server doesn't boot, repeat step 3 by swapping each
  		   DIMM in the memory channel group, one DIMM at a time until the bad DIMM is found.  
  		   (4) If error persists, capture the AHS logs and contact your support representative for 
  		   assistance.
  
  
           memoryBoardRpMsg1(5)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove the cartridge of the Memory
  		   Board that logged the error.  Open the cartridge and reseat the DIMM's. Attempt to boot 
  		   the server. (3) If error persists, capture the AHS logs and contact your support representative 
  		   for assistance.
  
  
           riserCardAssemblyRpMsg1(6)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Riser Board 
  		   that has an issue. Attempt to boot the server. (3) Remove the Riser Board then attempt 
  		   to boot the server. (4) If error persists, capture the AHS logs and contact your support 
  		   representative for assistance.
  
  
           flexibleLomRpMsg1(7)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible 
  		   LOM that has an issue. Attempt to boot the server. (3) Remove the Flexible LOM then  
  		   attempt to boot the server. (4) If error persists, capture the AHS logs and contact your 
  		   support representative for assistance.
  
  
           flexibleSmartArrayRpMsg1(8)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible 
  		   Smart Array Controller that has an issue. Attempt to boot the server. (3) Remove the 
  		   Flexible Smart Array Controller then attempt to boot the server. (4) If error persists, capture 
  		   the AHS logs and contact your support representative for assistance.
  
  
           optIOPCIeSlotsRpMsg1(9)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Option Card
  		   that has an issue. Attempt to boot the server. (3) Remove all Option Cards from the system.
  		   Attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support 
  		   representative for assistance.
  
  
           powerBackplaneRpMsg1(10)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove GPU power connects one at a time
  		   in order to isolate the bad GPU card, each time attempt to boot the server. (3) If error persists,
  		   capture the AHS logs and contact your support representative for assistance.
  
  
           sasBackplaneRpMsg1(11)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall Storage 
  		   Blackplane that logged the error (including cables). Attempt to boot the server. 
  		   (3) If error persists, capture the AHS logs and contact your support representative for assistance.
  
  
           powerSupplyRpMsg1(12)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Swap the first Power Supply with a 
  		   known good Power supply. Attempt to boot the server. (3) If error persists, capture the AHS 
  		   logs and contact your support representative for assistance.
  
  
           mezzCardRpMsg1(13)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Mezzanine 
  		   Card that has an issue. Attempt to boot the server. (3) Remove the Mezzanine Card then 
  		   attempt to boot the server. (4) If error persists, capture the AHS logs and contact your 
  		   support representative for assistance.
  		   
           enclosureRpMsg1(14)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Restore the enclosure to its base 
  		   configuration. Attempt to boot the server. (2) If error persists, capture the AHS logs 
  		   and contact your support representative for assistance."
  
  
        ::= { cpqHePowerFailureTableEntry 7 }

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['compaq', 'cpqHoTrapFlags', 'cpqHoGUIDCanonical'], 'RFC1155-SMI': ['enterprises', 'Counter'], 'RFC1213-MIB': ['DisplayString', 'sysName'], 'CPQSINFO-MIB': ['cpqSiServerSystemId', 'cpqSiMemModuleSize']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: CPQHLTH-MIB::cpqHePowerFailureRepairSteps.
  Source version and references

  Downloaded: 2026-10-23T19:25:36.131421+00:00.

• HPE networking MIB copies (LibreNMS/Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. HPE networking support.

  Module: CPQHLTH-MIB

  Published definition

  cpqHePowerFailureRepairSteps OBJECT-TYPE
        SYNTAX  INTEGER {
           noError(1),
           systemBoardRpMsg1(2),
           processorRpMsg1(3),
           memoryRpMsg1(4),
           memoryBoardRpMsg1(5),
           riserCardAssemblyRpMsg1(6),
           flexibleLomRpMsg1(7),
           flexibleSmartArrayRpMsg1(8),
           optIOPCIeSlotsRpMsg1(9),
           powerBackplaneRpMsg1(10),
           sasBackplaneRpMsg1(11),
           powerSupplyRpMsg1(12),
           mezzCardRpMsg1(13),
           enclosureRpMsg1(14)
        }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
           "Recommended troubleshooting steps for a particular device error.
           The value will be one of the following:
           
           noError(1)
             No errors were detected at this time.
  
           systemBoardRpMsg1(2)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Restore the server to its base 
  		   configuration. Attempt to boot the server. (3)If error persists, capture the AHS 
  		   logs and contact your support representative for assistance.
  
           processorRpMsg1(3)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Processor 
  		   that has an issue. Attempt to boot the server. (3) Swap the faulty Processor with a 
  		   known good Processor. Attempt to boot the server. (4) If error persists, capture the AHS 
  		   logs and contact your support representative for assistance.
  
  
           memoryRpMsg1(4)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall all DIMM's in 
  		   the memory channel group connected to the CPU that logged the error. Attempt to boot the 
  		   server. (3) Swap the first DIMM in the memory channel group with a known good DIMM.
  		   Attempt to boot the server.  If the server doesn't boot, repeat step 3 by swapping each
  		   DIMM in the memory channel group, one DIMM at a time until the bad DIMM is found.  
  		   (4) If error persists, capture the AHS logs and contact your support representative for 
  		   assistance.
  
  
           memoryBoardRpMsg1(5)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove the cartridge of the Memory
  		   Board that logged the error.  Open the cartridge and reseat the DIMM's. Attempt to boot 
  		   the server. (3) If error persists, capture the AHS logs and contact your support representative 
  		   for assistance.
  
  
           riserCardAssemblyRpMsg1(6)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Riser Board 
  		   that has an issue. Attempt to boot the server. (3) Remove the Riser Board then attempt 
  		   to boot the server. (4) If error persists, capture the AHS logs and contact your support 
  		   representative for assistance.
  
  
           flexibleLomRpMsg1(7)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible 
  		   LOM that has an issue. Attempt to boot the server. (3) Remove the Flexible LOM then  
  		   attempt to boot the server. (4) If error persists, capture the AHS logs and contact your 
  		   support representative for assistance.
  
  
           flexibleSmartArrayRpMsg1(8)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Flexible 
  		   Smart Array Controller that has an issue. Attempt to boot the server. (3) Remove the 
  		   Flexible Smart Array Controller then attempt to boot the server. (4) If error persists, capture 
  		   the AHS logs and contact your support representative for assistance.
  
  
           optIOPCIeSlotsRpMsg1(9)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Option Card
  		   that has an issue. Attempt to boot the server. (3) Remove all Option Cards from the system.
  		   Attempt to boot the server. (4) If error persists, capture the AHS logs and contact your support 
  		   representative for assistance.
  
  
           powerBackplaneRpMsg1(10)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove GPU power connects one at a time
  		   in order to isolate the bad GPU card, each time attempt to boot the server. (3) If error persists,
  		   capture the AHS logs and contact your support representative for assistance.
  
  
           sasBackplaneRpMsg1(11)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall Storage 
  		   Blackplane that logged the error (including cables). Attempt to boot the server. 
  		   (3) If error persists, capture the AHS logs and contact your support representative for assistance.
  
  
           powerSupplyRpMsg1(12)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Swap the first Power Supply with a 
  		   known good Power supply. Attempt to boot the server. (3) If error persists, capture the AHS 
  		   logs and contact your support representative for assistance.
  
  
           mezzCardRpMsg1(13)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Remove and then reinstall the Mezzanine 
  		   Card that has an issue. Attempt to boot the server. (3) Remove the Mezzanine Card then 
  		   attempt to boot the server. (4) If error persists, capture the AHS logs and contact your 
  		   support representative for assistance.
  		   
           enclosureRpMsg1(14)
  		   Try the following steps until the error no longer occurs:
  		   (1) Remove AC power, then restore AC power. (2) Restore the enclosure to its base 
  		   configuration. Attempt to boot the server. (2) If error persists, capture the AHS logs 
  		   and contact your support representative for assistance."
  
  
        ::= { cpqHePowerFailureTableEntry 7 }

  Module imports

  {'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'CPQHOST-MIB': ['compaq', 'cpqHoTrapFlags', 'cpqHoGUIDCanonical'], 'RFC1155-SMI': ['enterprises', 'Counter'], 'RFC1213-MIB': ['DisplayString', 'sysName'], 'CPQSINFO-MIB': ['cpqSiServerSystemId', 'cpqSiMemModuleSize']}

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: CPQHLTH-MIB::cpqHePowerFailureRepairSteps.
  Source version and references

  Downloaded: 2026-10-23T19:25:41.153279+00:00.