Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"portCtrlSpeedAndDuplex",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"autoNegotiation",
"(",
"1",
")",
",",
"tenMbpsHalfDuplex",
"(",
"2",
")",
",",
"tenMbpsFullDuplex",
"(",
"3",
")",
",",
"hundredMbpsHalfDuplex",
"(",
"4",
")",
",",
"hundredMbpsFullDuplex",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Speed and duplex configuraion. Different speed and duplex modes are available. There are speeds: 100 megabits per second (Fast Ethernet), and 10 megabits per second (Legacy Ethernet). Full-duplex allows packets to be transmitted in both directions at the same time, while half-duplex allows a device to either transmit or receive, but not both at the same time. Full-duplex may have double bandwidth than half-duplex. You can configure manually from the possible options, listed from best to worst: 100Mb full-duplex(5) 100Mb half-duplex(4) 10Mb full-duplex(3) 10Mb half-duplex(2) Set to autoNegotiation(1) to allow the two interfaces on the link to exchange the capabilities and characteristics of the each side, and select the best operating mode automatically when a cable is plugged in.\"",
"::=",
"{",
"portCtrlEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"autoNegotiation",
1
],
[
"tenMbpsHalfDuplex",
2
],
[
"tenMbpsFullDuplex",
3
],
[
"hundredMbpsHalfDuplex",
4
],
[
"hundredMbpsFullDuplex",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Speed and duplex configuraion. Different speed and duplex modes are available. There are speeds: 100 megabits per second (Fast Ethernet), and 10 megabits per second (Legacy Ethernet). Full-duplex allows packets to be transmitted in both directions at the same time, while half-duplex allows a device to either transmit or receive, but not both at the same time. Full-duplex may have double bandwidth than half-duplex. You can configure manually from the possible options, listed from best to worst: 100Mb full-duplex(5) 100Mb half-duplex(4) 10Mb full-duplex(3) 10Mb half-duplex(2) Set to autoNegotiation(1) to allow the two interfaces on the link to exchange the capabilities and characteristics of the each side, and select the best operating mode automatically when a cable is plugged in."
],
null,
null,
null,
null
]
}