Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hmSec2NetAction",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"other",
"(",
"1",
")",
",",
"activate",
"(",
"2",
")",
",",
"flushstates",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack and network configuration with the current value of hmSec2NetworkMode. All of the further configuration depends on the used operating mode, such as hmSec2LocalIPAddr, hmSec2GatewayIPAddr, hmSec2NetMask, hmSec2UseVLAN and hmSec2MgmtVLANID in Transparent Mode or the tables values out of hmSec2NetIPInterfaceTable (defined by hmSec2NetIPInterfaceEntry) in Router or PPPoE mode. In PPPoE mode also the PPPoE configuration is taken into account. Additional routing values will be used after the reconfiguration. Setting the object to flushstates(3) causes a flush to the Firewall and NAT state/mapping tables, which removes all active mappings and connection entries. Clients behind the Firewall or the NAT router will have to re-establish their connections.\"",
"DEFVAL",
"{",
"other",
"}",
"::=",
"{",
"hmSec2NetGeneralGroup",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"other",
1
],
[
"activate",
2
],
[
"flushstates",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack and network configuration with the current value of hmSec2NetworkMode. All of the further configuration depends on the used operating mode, such as hmSec2LocalIPAddr, hmSec2GatewayIPAddr, hmSec2NetMask, hmSec2UseVLAN and hmSec2MgmtVLANID in Transparent Mode or the tables values out of hmSec2NetIPInterfaceTable (defined by hmSec2NetIPInterfaceEntry) in Router or PPPoE mode. In PPPoE mode also the PPPoE configuration is taken into account. Additional routing values will be used after the reconfiguration. Setting the object to flushstates(3) causes a flush to the Firewall and NAT state/mapping tables, which removes all active mappings and connection entries. Clients behind the Firewall or the NAT router will have to re-establish their connections."
],
null,
null,
null,
[
"DEFVAL",
"other"
]
]
}