OID reference
1.3.6.1.4.1.248.52.1.14.4.1
IP address of the remote system in the transparent mode. On the master system the IP address of the backup system and vice versa. This IP address is used to synchronize the Firewall/NAT state tables of the system. If the address is not set (set to 0.0.0.0) the system disables Firewall/NAT synchronization.
Identification
{1 3 6 1 4 1 248 52 1 14 4 1}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.248.52.1.14.4.1.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
hmSec2RedTPRemoteIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the remote system in the transparent mode.
On the master system the IP address of
the backup system and vice versa.
This IP address is used to synchronize the
Firewall/NAT state tables of the system.
If the address is not set (set to 0.0.0.0)
the system disables Firewall/NAT synchronization."
::= { hmSec2RedTransparentGroup 1 }hmSec2RedTPRemoteIPAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"IP address of the remote system in the transparent mode.
On the master system the IP address of
the backup system and vice versa.
This IP address is used to synchronize the
Firewall/NAT state tables of the system.
If the address is not set (set to 0.0.0.0)
the system disables Firewall/NAT synchronization."
::= { hmSec2RedTransparentGroup 1 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
IP address of the remote system in the transparent mode. On the master system the IP address of the backup system and vice versa. This IP address is used to synchronize the Firewall/NAT state tables of the system. If the address is not set (set to 0.0.0.0) the system disables Firewall/NAT synchronization.
Belden, GarrettCom and Hirschmann IT official standalone MIBsHirschmann MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hmSec2RedTPRemoteIPAddr
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hmSec2RedTPRemoteIPAddr",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"IP address of the remote system in the transparent mode. On the master system the IP address of the backup system and vice versa. This IP address is used to synchronize the Firewall/NAT state tables of the system. If the address is not set (set to 0.0.0.0) the system disables Firewall/NAT synchronization.\"",
"::=",
"{",
"hmSec2RedTransparentGroup",
"1",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"IP address of the remote system in the transparent mode. On the master system the IP address of the backup system and vice versa. This IP address is used to synchronize the Firewall/NAT state tables of the system. If the address is not set (set to 0.0.0.0) the system disables Firewall/NAT synchronization."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Hirschmann support.
Module: HMSECURITY2-MIB
See published definition above
{'SNMPv2-TC': ['PhysAddress', 'DisplayString', 'RowStatus', 'MacAddress', 'TEXTUAL-CONVENTION', 'TestAndIncr'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Integer32', 'IpAddress', 'Counter32', 'TimeTicks'], 'SNMP-TARGET-MIB': ['SnmpTagValue', 'SnmpTagList'], 'INET-ADDRESS-MIB': ['InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'HMPRIV-MGMT-SNMP-MIB': ['hmLastIpAddr', 'hmLastLoginUserName']}Related source files and packages:
Module: HMSECURITY2-MIB
See published definition above
{'SNMPv2-TC': ['PhysAddress', 'DisplayString', 'RowStatus', 'MacAddress', 'TestAndIncr'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Integer32', 'IpAddress', 'Counter32', 'TimeTicks'], 'SNMP-TARGET-MIB': ['SnmpTagValue', 'SnmpTagList'], 'INET-ADDRESS-MIB': ['InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'HMPRIV-MGMT-SNMP-MIB': ['hmLastIpAddr', 'hmLastLoginUserName']}Same file in 069Qp00000juD3uIAE.
Same file in 069Qp00000jtpG7IAI.
Same file in 069Qp00000jtojrIAA.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.52.1.14.4.2 | hmSec2RedTPOperState | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.14.4.3 | hmSec2RedTPOperInfo | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.14.4.4 | hmSec2RedTPCommunicationState | 0 | 0 |