OID reference
1.3.6.1.4.1.248.52.1.15.2.2.1.10
If this value is enabled, the 1:1 NAT does the NAT operation in the opposite direction. This means the NAT operation is done from the view of the external interface, when devices on the external side shall be mapped to the internal side. This feature shall be used in special cases only.
Identification
{1 3 6 1 4 1 248 52 1 15 2 2 1 10}
| Value | Name |
|---|---|
| 1 | enable |
| 2 | disable |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In HMSECURITY2-MIB, the row index hmSec2Nat1To1Index is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.248.52.1.15.2.2.1.10.<hmSec2Nat1To1Index>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.248.52.1.15.2.2.1.10
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
hmSec2Nat1To1InvertDirection OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this value is enabled, the 1:1 NAT does
the NAT operation in the opposite direction.
This means the NAT operation is done from
the view of the external interface, when
devices on the external side shall be
mapped to the internal side.
This feature shall be used in special
cases only."
DEFVAL { disable }
::= { hmSec2Nat1To1Entry 10 }hmSec2Nat1To1InvertDirection OBJECT-TYPE
SYNTAX INTEGER {
enable(1),
disable(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"If this value is enabled, the 1:1 NAT does
the NAT operation in the opposite direction.
This means the NAT operation is done from
the view of the external interface, when
devices on the external side shall be
mapped to the internal side.
This feature shall be used in special
cases only."
DEFVAL { disable }
::= { hmSec2Nat1To1Entry 10 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
If this value is enabled, the 1:1 NAT does the NAT operation in the opposite direction. This means the NAT operation is done from the view of the external interface, when devices on the external side shall be mapped to the internal side. This feature shall be used in special cases only.
Belden, GarrettCom and Hirschmann IT official standalone MIBsHirschmann MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: hmSec2Nat1To1InvertDirection
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"hmSec2Nat1To1InvertDirection",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enable",
"(",
"1",
")",
",",
"disable",
"(",
"2",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"If this value is enabled, the 1:1 NAT does the NAT operation in the opposite direction. This means the NAT operation is done from the view of the external interface, when devices on the external side shall be mapped to the internal side. This feature shall be used in special cases only.\"",
"DEFVAL",
"{",
"disable",
"}",
"::=",
"{",
"hmSec2Nat1To1Entry",
"10",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enable",
1
],
[
"disable",
2
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"If this value is enabled, the 1:1 NAT does the NAT operation in the opposite direction. This means the NAT operation is done from the view of the external interface, when devices on the external side shall be mapped to the internal side. This feature shall be used in special cases only."
],
null,
null,
null,
[
"DEFVAL",
"disable"
]
]
}Vendor MIB copy from the Observium Community archive. Hirschmann support.
Module: HMSECURITY2-MIB
See published definition above
{'SNMPv2-TC': ['PhysAddress', 'DisplayString', 'RowStatus', 'MacAddress', 'TEXTUAL-CONVENTION', 'TestAndIncr'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Integer32', 'IpAddress', 'Counter32', 'TimeTicks'], 'SNMP-TARGET-MIB': ['SnmpTagValue', 'SnmpTagList'], 'INET-ADDRESS-MIB': ['InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'HMPRIV-MGMT-SNMP-MIB': ['hmLastIpAddr', 'hmLastLoginUserName']}Related source files and packages:
Module: HMSECURITY2-MIB
See published definition above
{'SNMPv2-TC': ['PhysAddress', 'DisplayString', 'RowStatus', 'MacAddress', 'TestAndIncr'], 'SNMPv2-SMI': ['NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'enterprises', 'Integer32', 'IpAddress', 'Counter32', 'TimeTicks'], 'SNMP-TARGET-MIB': ['SnmpTagValue', 'SnmpTagList'], 'INET-ADDRESS-MIB': ['InetPortNumber'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'HMPRIV-MGMT-SNMP-MIB': ['hmLastIpAddr', 'hmLastLoginUserName']}Same file in 069Qp00000juD3uIAE.
Same file in 069Qp00000jtpG7IAI.
Same file in 069Qp00000jtojrIAA.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.248.52.1.15.2.2.1.1 | hmSec2Nat1To1Index | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.2 | hmSec2Nat1To1SrcNet | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.3 | hmSec2Nat1To1DstNet | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.4 | hmSec2Nat1To1NetMask | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.5 | hmSec2Nat1To1Desc | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.6 | hmSec2Nat1To1ErrorText | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.7 | hmSec2Nat1To1RowStatus | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.8 | hmSec2Nat1To1Alg | 0 | 0 | |
| 1.3.6.1.4.1.248.52.1.15.2.2.1.9 | hmSec2Nat1To1DoOutput | 0 | 0 |