Description 1
This variables decides which measurements method will be used for monitoring. Also used the set the Tone Frequency used for runFiberIdentification.
Sources for this description
ADVA MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.2544.1.14.6.1.1.19
This variables decides which measurements method will be used for monitoring. Also used the set the Tone Frequency used for runFiberIdentification.
Identification
{1 3 6 1 4 1 2544 1 14 6 1 1 19}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it. Notes below names come from selected MIB definitions.
| Value | Name and source notes | Source variants |
|---|---|---|
| 1 | lossCalculation Loss Calcualtion Mode enabled | 1, 2 |
| 2 | trafficCheck Traffic Check Mode enabled | 1, 2 |
| 3 | standard PES Standard | 1, 2 |
| 4 | highDynamic PES High Dynamic | 1, 2 |
| 5 | highResolution PES High Resolution | 1, 2 |
| 6 | fiberIdentFrequency270 Fiber Identification Tone Frequency (270Hz) | 1 |
| 7 | fiberIdentFrequency330 Fiber Identification Tone Frequency (330Hz) | 1 |
| 8 | fiberIdentFrequency1000 Fiber Identification Tone Frequency (1000Hz) | 1 |
| 9 | fiberIdentFrequency2000 Fiber Identification Tone Frequency (2000Hz) | 1 |
| 10 | cabinetSensorShort PES Cabinet Sensor Short Range <20km , min distance between each Sensor 5m | 1 |
| 11 | cabinetSensorLong PES Cabinet Sensor Long Range <100km , min distance between each Sensor 200m | 1 |
| 12 | dpaFast DPA preset for low loss PON | 1 |
| 13 | dpaBalanced DPA preset for medium loss PON | 1 |
| 14 | dpaHighSensitivity DPA preset for high loss PON | 1 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In ADVA-FSP3000ALM-MIB, the row index portId is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.2544.1.14.6.1.1.19.<portId>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2544.1.14.6.1.1.19
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
maintainOperationMonitoringMode OBJECT-TYPE
SYNTAX INTEGER {
lossCalculation (1),-- Loss Calcualtion Mode enabled
trafficCheck (2),-- Traffic Check Mode enabled
standard (3), -- PES Standard
highDynamic (4), -- PES High Dynamic
highResolution (5), -- PES High Resolution
fiberIdentFrequency270 (6), -- Fiber Identification Tone Frequency (270Hz)
fiberIdentFrequency330 (7), -- Fiber Identification Tone Frequency (330Hz)
fiberIdentFrequency1000 (8), -- Fiber Identification Tone Frequency (1000Hz)
fiberIdentFrequency2000 (9), -- Fiber Identification Tone Frequency (2000Hz)
cabinetSensorShort (10), -- PES Cabinet Sensor Short Range <20km , min distance between each Sensor 5m
cabinetSensorLong (11), -- PES Cabinet Sensor Long Range <100km , min distance between each Sensor 200m
dpaFast (12), -- DPA preset for low loss PON
dpaBalanced (13) , -- DPA preset for medium loss PON
dpaHighSensitivity (14) -- DPA preset for high loss PON
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variables decides which measurements method will be used for monitoring.
Also used the set the Tone Frequency used for runFiberIdentification."
::= { maintainEntry 19 }maintainOperationMonitoringMode OBJECT-TYPE
SYNTAX INTEGER {
lossCalculation (1),-- Loss Calcualtion Mode enabled
trafficCheck (2),-- Traffic Check Mode enabled
standard (3), -- PES Standard
highDynamic (4), -- PES High Dynamic
highResolution (5) -- PES High Resolution
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This variables decides which measurements method will be used for monitoring."
::= { maintainEntry 19 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
This variables decides which measurements method will be used for monitoring. Also used the set the Tone Frequency used for runFiberIdentification.
ADVA MIB copies (LibreNMS/Observium Community)
Description 2
This variables decides which measurements method will be used for monitoring.
ADVA MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: maintainOperationMonitoringMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maintainOperationMonitoringMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"lossCalculation",
"(",
"1",
")",
",",
"trafficCheck",
"(",
"2",
")",
",",
"standard",
"(",
"3",
")",
",",
"highDynamic",
"(",
"4",
")",
",",
"highResolution",
"(",
"5",
")",
",",
"fiberIdentFrequency270",
"(",
"6",
")",
",",
"fiberIdentFrequency330",
"(",
"7",
")",
",",
"fiberIdentFrequency1000",
"(",
"8",
")",
",",
"fiberIdentFrequency2000",
"(",
"9",
")",
",",
"cabinetSensorShort",
"(",
"10",
")",
",",
"cabinetSensorLong",
"(",
"11",
")",
",",
"dpaFast",
"(",
"12",
")",
",",
"dpaBalanced",
"(",
"13",
")",
",",
"dpaHighSensitivity",
"(",
"14",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variables decides which measurements method will be used for monitoring. Also used the set the Tone Frequency used for runFiberIdentification.\"",
"::=",
"{",
"maintainEntry",
"19",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"lossCalculation",
1
],
[
"trafficCheck",
2
],
[
"standard",
3
],
[
"highDynamic",
4
],
[
"highResolution",
5
],
[
"fiberIdentFrequency270",
6
],
[
"fiberIdentFrequency330",
7
],
[
"fiberIdentFrequency1000",
8
],
[
"fiberIdentFrequency2000",
9
],
[
"cabinetSensorShort",
10
],
[
"cabinetSensorLong",
11
],
[
"dpaFast",
12
],
[
"dpaBalanced",
13
],
[
"dpaHighSensitivity",
14
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variables decides which measurements method will be used for monitoring. Also used the set the Tone Frequency used for runFiberIdentification."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. ADVA support.
Module: ADVA-FSP3000ALM-MIB
See published definition above
{'ADVA-MIB': ['TrapAlarmSeverity', 'TrapCounter', 'IdentityTranslation'], 'SNMPv2-TC': ['DateAndTime', 'RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64', 'enterprises'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Status in source: current.
Names: maintainOperationMonitoringMode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"maintainOperationMonitoringMode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"lossCalculation",
"(",
"1",
")",
",",
"trafficCheck",
"(",
"2",
")",
",",
"standard",
"(",
"3",
")",
",",
"highDynamic",
"(",
"4",
")",
",",
"highResolution",
"(",
"5",
")",
"}",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"This variables decides which measurements method will be used for monitoring.\"",
"::=",
"{",
"maintainEntry",
"19",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"lossCalculation",
1
],
[
"trafficCheck",
2
],
[
"standard",
3
],
[
"highDynamic",
4
],
[
"highResolution",
5
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This variables decides which measurements method will be used for monitoring."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. ADVA support.
Module: ADVA-FSP3000ALM-MIB
See published definition above
{'ADVA-MIB': ['TrapAlarmSeverity', 'TrapCounter', 'IdentityTranslation'], 'SNMPv2-TC': ['DateAndTime', 'RowStatus', 'TruthValue', 'DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'IpAddress', 'Counter64', 'enterprises'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.14.6.1.1.1 | maintainOperationRequest | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.2 | maintainOperationRefractiveIndex | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.3 | maintainOperationExternalOffset | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.4 | maintainOperationCouplerLoss | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.5 | maintainOperationOtdrLength | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.6 | maintainOperationOtdrPowerLevel | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.7 | maintainOperationOtdrPulseWidth | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.8 | maintainOperationOtdrAverageRate | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.9 | maintainOperationState | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.10 | maintainOperationLastError | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.11 | maintainOperationNumConnectors | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.12 | maintainOperationNumSplices | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.13 | maintainOperationMaxLaserPower | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.14 | maintainOperationOtdrLinkLength | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.15 | maintainOperationOtdrMeasTime | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.16 | maintainOperationDwdmMode | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.17 | maintainOperationLossCalculationPoint | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.18 | maintainOperationFastMode | 0 | 0 | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.20 | maintainOperationExpectedLoss | 0 | 0 |