OID reference
1.3.6.1.4.1.25651.1.2.3.2.2.4.1.3
The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails or when there is no E1 signal available from the far end to provide the user at the local end. See Web, Configuration, Interface, T1/E1, AIS. To make permanent…
Identification
{1 3 6 1 4 1 25651 1 2 3 2 2 4 1 3}
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
te1AIS OBJECT-TYPE
SYNTAX Te1StatusT
MAX-ACCESS read-write
STATUS current
DESCRIPTION "The T1/E1 AIS enabled flag: enable(1)/disable(0).
If enabled, the radio places an AIS code on the output of the associated interface
if and when the link fails or when there is no E1 signal available from the far
end to provide the user at the local end.
See Web, Configuration, Interface, T1/E1, AIS.
To make permanent, write save to commitTe1Settings after change."
::= { te1Interface 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails or when there is no E1 signal available from the far end to provide the user at the local end. See Web, Configuration, Interface, T1/E1, AIS. To make permanent, write save to commitTe1Settings after change.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: te1AIS
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"te1AIS",
"OBJECT-TYPE",
"SYNTAX",
"Te1StatusT",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails or when there is no E1 signal available from the far end to provide the user at the local end. See Web, Configuration, Interface, T1/E1, AIS. To make permanent, write save to commitTe1Settings after change.\"",
"::=",
"{",
"te1Interface",
"3",
"}"
],
"syntax_tree": [
[
"row",
"Te1StatusT"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The T1/E1 AIS enabled flag: enable(1)/disable(0). If enabled, the radio places an AIS code on the output of the associated interface if and when the link fails or when there is no E1 signal available from the far end to provide the user at the local end. See Web, Configuration, Interface, T1/E1, AIS. To make permanent, write save to commitTe1Settings after change."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive.
Module: ExaltComProducts
See published definition above
{'ExaltComm': ['exaltcommunications', 'EthMainStatusT', 'EthAuxStatusT', 'AuxNmsMode', 'EthPortMode', 'Te1StatusT', 'Te1LboT', 'EnableStatusT', 'Te1LineCodeT', 'Te1LoopBackModeT', 'AlarmLevelT', 'Led4ColorT', 'VlanStatusT', 'VlanGroupT', 'ExaltEnableT', 'AcmModulationT', 'FileTransferTypeT', 'FileTransferStartT', 'NtpClientEnableT', 'TimeZoneT'], 'SNMPv2-TC': ['DisplayString', 'TEXTUAL-CONVENTION'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-IDENTITY', 'OBJECT-TYPE', 'IpAddress', 'Integer32', 'Gauge32'], 'SNMPv2-CONF': ['OBJECT-GROUP']}Related source files and packages:
Same file in Observium Community.
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.1 | te1Status | 0 | 0 | |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.2 | t1LBO | 0 | 0 | |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.4 | t1LineCode | 0 | 0 | |
| 1.3.6.1.4.1.25651.1.2.3.2.2.4.1.5 | te1LoopBackMode | 0 | 0 |