{1 3 6 1 4 1 259 10 1 11 1 13 8 2}
Action to copy IP DSCP settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (big-endian) order. Starting from the 5th octet is the destination port list in a form described by PortList in the Q-BRIDGE-MIB. Writing this object will perform copy. Reading this object will always get a zero-length octet string.
Status in source: current.
Names: prioCopyIpDscp
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"prioCopyIpDscp",
"OBJECT-TYPE",
"SYNTAX",
"OCTET",
"STRING",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Action to copy IP DSCP settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (big-endian) order. Starting from the 5th octet is the destination port list in a form described by PortList in the Q-BRIDGE-MIB. Writing this object will perform copy. Reading this object will always get a zero-length octet string.\"",
"::=",
"{",
"prioCopy",
"2",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"OCTET STRING"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Action to copy IP DSCP settings from a source port to many destination ports. The first four octets represent an integer for the source port in high-to-low (big-endian) order. Starting from the 5th octet is the destination port list in a form described by PortList in the Q-BRIDGE-MIB. Writing this object will perform copy. Reading this object will always get a zero-length octet string."
],
null,
null,
null,
null
]
}Module: Ecs4810-12m-MIB
prioCopyIpDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP DSCP settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 2 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength']}Downloaded: 2026-10-23T18:27:46.074600+00:00.
Vendor MIB copy from the Observium Community archive. Edgecore support.
Module: ECS4810-12M-MIB
prioCopyIpDscp OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-write
STATUS current
DESCRIPTION "Action to copy IP DSCP settings from
a source port to many destination ports.
The first four octets represent an integer for
the source port in high-to-low (big-endian) order.
Starting from the 5th octet is the destination port list
in a form described by PortList in the Q-BRIDGE-MIB.
Writing this object will perform copy.
Reading this object will always get a zero-length
octet string."
::= { prioCopy 2 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength']}Related source files and packages:
Downloaded: 2026-10-23T19:26:18.242243+00:00.