Reference record for OID 1.3.6.1.4.1.259.10.1.22.1.2.1.1.4

portSpeedDpxCfg

Status in source: current.

Names: portSpeedDpxCfg

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "portSpeedDpxCfg",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "reserved",
    "(",
    "1",
    ")",
    ",",
    "halfDuplex10",
    "(",
    "2",
    ")",
    ",",
    "fullDuplex10",
    "(",
    "3",
    ")",
    ",",
    "halfDuplex100",
    "(",
    "4",
    ")",
    ",",
    "fullDuplex100",
    "(",
    "5",
    ")",
    ",",
    "halfDuplex1000",
    "(",
    "6",
    ")",
    ",",
    "fullDuplex1000",
    "(",
    "7",
    ")",
    ",",
    "halfDuplex10g",
    "(",
    "8",
    ")",
    ",",
    "fullDuplex10g",
    "(",
    "9",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode halfDuplex10g(8) - 10g and half duplex mode fullDuplex10g(9) - 10g and full duplex mode hundredBaseTX port can be set as: halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as: fullDuplex100(5) thousandBaseSX port can be set as: fullDuplex1000(7) thousandBaseLX port can be set as: fullDuplex1000(7) thousandBaseT port can be set as: halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) thousandBaseGBIC port can be set as: fullDuplex1000(7) thousandBaseSfp port can be set as: fullDuplex1000(7) hundredBaseFxScSingleMode port can be set as: fullDuplex100(5) hundredBaseFxScMultiMode port can be set as: fullDuplex100(5) thousandBaseCX port can be set as: fullDuplex1000(7) tenG port can be set as: halfDuplex10g(8) fullDuplex10g(9) The actual operating speed and duplex of the port is given by portSpeedDpxStatus.\"",
    "DEFVAL",
    "{",
    "halfDuplex10",
    "}",
    "::=",
    "{",
    "portEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "reserved",
            1
          ],
          [
            "halfDuplex10",
            2
          ],
          [
            "fullDuplex10",
            3
          ],
          [
            "halfDuplex100",
            4
          ],
          [
            "fullDuplex100",
            5
          ],
          [
            "halfDuplex1000",
            6
          ],
          [
            "fullDuplex1000",
            7
          ],
          [
            "halfDuplex10g",
            8
          ],
          [
            "fullDuplex10g",
            9
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Configures the speed and duplex mode for a port or trunk, according to: halfDuplex10(2) - 10Mbps and half duplex mode fullDuplex10(3) - 10Mbps and full duplex mode halfDuplex100(4) - 100Mbps and half duplex mode fullDuplex100(5) - 100Mbps and full duplex mode halfDuplex1000(6) - 1000Mbps and half duplex mode fullDuplex1000(7) - 1000Mbps and full duplex mode halfDuplex10g(8) - 10g and half duplex mode fullDuplex10g(9) - 10g and full duplex mode hundredBaseTX port can be set as: halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) hundredBaseFX port can be set as: fullDuplex100(5) thousandBaseSX port can be set as: fullDuplex1000(7) thousandBaseLX port can be set as: fullDuplex1000(7) thousandBaseT port can be set as: halfDuplex10(2) fullDuplex10(3) halfDuplex100(4) fullDuplex100(5) thousandBaseGBIC port can be set as: fullDuplex1000(7) thousandBaseSfp port can be set as: fullDuplex1000(7) hundredBaseFxScSingleMode port can be set as: fullDuplex100(5) hundredBaseFxScMultiMode port can be set as: fullDuplex100(5) thousandBaseCX port can be set as: fullDuplex1000(7) tenG port can be set as: halfDuplex10g(8) fullDuplex10g(9) The actual operating speed and duplex of the port is given by portSpeedDpxStatus."
    ],
    null,
    null,
    null,
    [
      "DEFVAL",
      "halfDuplex10"
    ]
  ]
}

• Edgecore MIB copies (Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. Edgecore support.

  Module: ES3528MV2-MIB

  Published definition

  portSpeedDpxCfg OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                          reserved(1),
                          halfDuplex10(2),
                          fullDuplex10(3),
                          halfDuplex100(4),
                          fullDuplex100(5),
                          halfDuplex1000(6),
                          fullDuplex1000(7),
                          halfDuplex10g(8),
                          fullDuplex10g(9)
                      }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Configures the speed and duplex mode for a port or trunk,
                       according to:
                           halfDuplex10(2)    - 10Mbps and half duplex mode
                           fullDuplex10(3)    - 10Mbps and full duplex mode
                           halfDuplex100(4)   - 100Mbps and half duplex mode
                           fullDuplex100(5)   - 100Mbps and full duplex mode
                           halfDuplex1000(6)  - 1000Mbps and half duplex mode
                           fullDuplex1000(7)  - 1000Mbps and full duplex mode
                          halfDuplex10g(8)   - 10g and half duplex mode
                           fullDuplex10g(9)   - 10g and full duplex mode
  
                          hundredBaseTX  port can be set as:
                           halfDuplex10(2)
                           fullDuplex10(3)
                           halfDuplex100(4)
                           fullDuplex100(5)
                          hundredBaseFX  port can be set as:
                              fullDuplex100(5)
                          thousandBaseSX port can be set as:
                              fullDuplex1000(7)
                          thousandBaseLX port can be set as:
                              fullDuplex1000(7)
                          thousandBaseT port can be set as:
                              halfDuplex10(2)
                              fullDuplex10(3)
                              halfDuplex100(4)
                              fullDuplex100(5)
                          thousandBaseGBIC port can be set as:
                              fullDuplex1000(7)
                          thousandBaseSfp port can be set as:
                              fullDuplex1000(7)
                          hundredBaseFxScSingleMode port can be set as:
                              fullDuplex100(5)
                          hundredBaseFxScMultiMode port can be set as:
                              fullDuplex100(5)
                          thousandBaseCX port can be set as:
                              fullDuplex1000(7)
                          tenG port can be set as:
                              halfDuplex10g(8)
                              fullDuplex10g(9)
  
                       The actual operating speed and duplex of the port
                       is given by portSpeedDpxStatus."
          DEFVAL      { halfDuplex10 }
          ::= { portEntry 4 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry', 'dot1vProtocolPortEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength']}

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: ES3528MV2-MIB::portSpeedDpxCfg.
  Source version and references

  Downloaded: 2026-10-23T19:26:18.154246+00:00.

• Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: ES3528MV2-MIB

  Vendor MIB copy from the LibreNMS archive.

  Module: ES3528MV2-MIB

  Published definition

  portSpeedDpxCfg OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                          reserved(1),
                          halfDuplex10(2),
                          fullDuplex10(3),
                          halfDuplex100(4),
                          fullDuplex100(5),
                          halfDuplex1000(6),
                          fullDuplex1000(7),
                          halfDuplex10g(8),
                          fullDuplex10g(9)
                      }
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Configures the speed and duplex mode for a port or trunk,
                       according to:
                           halfDuplex10(2)    - 10Mbps and half duplex mode
                           fullDuplex10(3)    - 10Mbps and full duplex mode
                           halfDuplex100(4)   - 100Mbps and half duplex mode
                           fullDuplex100(5)   - 100Mbps and full duplex mode
                           halfDuplex1000(6)  - 1000Mbps and half duplex mode
                           fullDuplex1000(7)  - 1000Mbps and full duplex mode
                          halfDuplex10g(8)   - 10g and half duplex mode
                           fullDuplex10g(9)   - 10g and full duplex mode
  
                          hundredBaseTX  port can be set as:
                           halfDuplex10(2)
                           fullDuplex10(3)
                           halfDuplex100(4)
                           fullDuplex100(5)
                          hundredBaseFX  port can be set as:
                              fullDuplex100(5)
                          thousandBaseSX port can be set as:
                              fullDuplex1000(7)
                          thousandBaseLX port can be set as:
                              fullDuplex1000(7)
                          thousandBaseT port can be set as:
                              halfDuplex10(2)
                              fullDuplex10(3)
                              halfDuplex100(4)
                              fullDuplex100(5)
                          thousandBaseGBIC port can be set as:
                              fullDuplex1000(7)
                          thousandBaseSfp port can be set as:
                              fullDuplex1000(7)
                          hundredBaseFxScSingleMode port can be set as:
                              fullDuplex100(5)
                          hundredBaseFxScMultiMode port can be set as:
                              fullDuplex100(5)
                          thousandBaseCX port can be set as:
                              fullDuplex1000(7)
                          tenG port can be set as:
                              halfDuplex10g(8)
                              fullDuplex10g(9)
  
                       The actual operating speed and duplex of the port
                       is given by portSpeedDpxStatus."
          DEFVAL      { halfDuplex10 }
          ::= { portEntry 4 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: ES3528MV2-MIB::portSpeedDpxCfg.
  Source version and references

  Downloaded: 2026-10-24T02:14:14.783310+00:00.