{1 3 6 1 4 1 259 10 1 27 1 5 2 1 22}
Configure VLAN ID of tagged BPDU on the specified port. Setting this to 0 means that the untagged BPDU transmitted. When setting the specified port working on TRUNK mode and allowed the VLAN id, the tagged BPDU should be transmitted on the specified port.
Status in source: current.
Names: staPortBpduVlanId
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"staPortBpduVlanId",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"0",
"|",
"1",
".",
".",
"4094",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Configure VLAN ID of tagged BPDU on the specified port. Setting this to 0 means that the untagged BPDU transmitted. When setting the specified port working on TRUNK mode and allowed the VLAN id, the tagged BPDU should be transmitted on the specified port. \"",
"::=",
"{",
"staPortEntry",
"22",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
0
],
[
1,
4094
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Configure VLAN ID of tagged BPDU on the specified port. Setting this to 0 means that the untagged BPDU transmitted. When setting the specified port working on TRUNK mode and allowed the VLAN id, the tagged BPDU should be transmitted on the specified port."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Edgecore support.
Module: ECS3510-MIB
staPortBpduVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure VLAN ID of tagged BPDU on the specified port.
Setting this to 0 means that the untagged BPDU transmitted.
When setting the specified port working on TRUNK mode and
allowed the VLAN id, the tagged BPDU should be transmitted
on the specified port.
"
::= { staPortEntry 22 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6']}Related source files and packages:
Downloaded: 2026-10-23T19:26:18.051249+00:00.
Vendor MIB copy from the LibreNMS archive.
Module: ECS3510-MIB
staPortBpduVlanId OBJECT-TYPE
SYNTAX Integer32(0|1..4094)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Configure VLAN ID of tagged BPDU on the specified port.
Setting this to 0 means that the untagged BPDU transmitted.
When setting the specified port working on TRUNK mode and
allowed the VLAN id, the tagged BPDU should be transmitted
on the specified port.
"
::= { staPortEntry 22 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6']}Related source files and packages:
Downloaded: 2026-10-24T02:14:14.714311+00:00.