{1 3 6 1 4 1 259 10 1 41 1 5 6 5 1 14}
The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority).
Status in source: current.
Names: xstInstancePortOperPathCost
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"xstInstancePortOperPathCost",
"OBJECT-TYPE",
"SYNTAX",
"Integer32",
"(",
"1",
".",
".",
"200000000",
")",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority).\"",
"::=",
"{",
"xstInstancePortEntry",
"14",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"Integer32",
[
"integerSubType",
[
[
1,
200000000
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The oper value of the RST pathcost or MST internal pathcost, in the range of 1 to 200000000. This parameter is used to determine the best path between devices. Therefore, lower values should be assigned to ports attached to faster media, and higher values assigned to ports with slower media. (Path cost takes precedence over port priority)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Edgecore support.
Module: ECS4620-MIB
xstInstancePortOperPathCost OBJECT-TYPE
SYNTAX Integer32(1..200000000)
MAX-ACCESS read-only
STATUS current
DESCRIPTION "The oper value of the RST pathcost or MST internal pathcost,
in the range of 1 to 200000000.
This parameter is used to determine the best path between
devices. Therefore, lower values should be assigned to
ports attached to faster media, and higher values assigned
to ports with slower media. (Path cost takes precedence
over port priority)."
::= { xstInstancePortEntry 14 }{'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}Related source files and packages:
Downloaded: 2026-10-23T19:26:18.142246+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.3 | xstInstancePortPriority | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.4 | xstInstancePortState | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.5 | xstInstancePortEnable | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.7 | xstInstancePortDesignatedRoot | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.8 | xstInstancePortDesignatedCost | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.9 | xstInstancePortDesignatedBridge | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.10 | xstInstancePortDesignatedPort | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.11 | xstInstancePortForwardTransitions | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.12 | xstInstancePortPortRole | 0 | 0 | |
| 1.3.6.1.4.1.259.10.1.41.1.5.6.5.1.13 | xstInstancePortAdminPathCost | 0 | 0 |