Reference record for OID 1.3.6.1.4.1.259.10.1.43.1.5.6.4.1.16

xstInstanceCfgPathCostMethod

Status in source: current.

Names: xstInstanceCfgPathCostMethod

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "xstInstanceCfgPathCostMethod",
    "OBJECT-TYPE",
    "SYNTAX",
    "StaPathCostMode",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the xstInstancePortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of xstInstancePortPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used.\"",
    "::=",
    "{",
    "xstInstanceCfgEntry",
    "16",
    "}"
  ],
  "syntax_tree": [
    [
      "row",
      "StaPathCostMode"
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "For RST or MST protocol, this indicates the type of spanning tree path cost mode used by the switch. The mode applies to all instances of the Spanning Tree protocol running on the switch. When the value of this MIB object is changed, the path cost of all ports will be reassigned to the default path cost values based on the new spanning tree path cost mode and the ports' speed. When the value of this MIB object is set to long(2), the xstInstancePortPathCost MIB object must be used in order to retrieve/configure the spanning tree port path cost as a 32-bit value. The set operation on dot1dStpPortPathCost in BRIDGE-MIB will be rejected. While retrieving the value of dot1dStpPortPathCost, the maximum value of 65535 will be returned if the value of xstInstancePortPathCost for the same instance exceeds 65535. When the value of this MIB object is set to short(1), the dot1dStpPortPathCost in BRIDGE-MIB must be used."
    ],
    null,
    null,
    null,
    null
  ]
}

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS2100-Series.mib

  Module: ECS2100-28PP-MIB

  Published definition

  xstInstanceCfgPathCostMethod OBJECT-TYPE
       SYNTAX      StaPathCostMode
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
         "For RST or MST protocol, this indicates the type of spanning tree path
         cost mode used by the switch. The mode applies to all instances of the
         Spanning Tree protocol running on the switch.
  
         When the value of this MIB object is changed, the path cost
         of all ports will be reassigned to the default path cost
         values based on the new spanning tree path cost mode and the
         ports' speed.
  
         When the value of this MIB object is set to long(2),
         the xstInstancePortPathCost MIB object must be used in order
         to retrieve/configure the spanning tree port path cost as a
         32-bit value. The set operation on dot1dStpPortPathCost in
         BRIDGE-MIB will be rejected. While retrieving the value of
         dot1dStpPortPathCost, the maximum value of 65535 will be
         returned if the value of xstInstancePortPathCost for the same
         instance exceeds 65535.
  
         When the value of this MIB object is set to short(1),
         the dot1dStpPortPathCost in BRIDGE-MIB must be used."
       ::= { xstInstanceCfgEntry 16 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry', 'dot1vProtocolPortEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower']}

  · Download ECS2100-Series.mib
  Source location: ECS2100-28PP-MIB::xstInstanceCfgPathCostMethod.
  Source version and references

  Downloaded: 2026-10-23T18:27:35.022782+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS2100-Series_V1.2.2.34.mib

  Module: ECS2100-28PP-MIB

  Published definition

  xstInstanceCfgPathCostMethod OBJECT-TYPE
       SYNTAX      StaPathCostMode
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
         "For RST or MST protocol, this indicates the type of spanning tree path
         cost mode used by the switch. The mode applies to all instances of the
         Spanning Tree protocol running on the switch.
  
         When the value of this MIB object is changed, the path cost
         of all ports will be reassigned to the default path cost
         values based on the new spanning tree path cost mode and the
         ports' speed.
  
         When the value of this MIB object is set to long(2),
         the xstInstancePortPathCost MIB object must be used in order
         to retrieve/configure the spanning tree port path cost as a
         32-bit value. The set operation on dot1dStpPortPathCost in
         BRIDGE-MIB will be rejected. While retrieving the value of
         dot1dStpPortPathCost, the maximum value of 65535 will be
         returned if the value of xstInstancePortPathCost for the same
         instance exceeds 65535.
  
         When the value of this MIB object is set to short(1),
         the dot1dStpPortPathCost in BRIDGE-MIB must be used."
       ::= { xstInstanceCfgEntry 16 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry', 'dot1vProtocolPortEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower']}

  · Download ECS2100-Series_V1.2.2.34.mib
  Source location: ECS2100-28PP-MIB::xstInstanceCfgPathCostMethod.
  Source version and references

  Downloaded: 2026-10-23T18:27:34.141963+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS2100_202412100000Z.mib

  Module: ECS2100-28PP-MIB

  Published definition

  xstInstanceCfgPathCostMethod OBJECT-TYPE
       SYNTAX      StaPathCostMode
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
         "For RST or MST protocol, this indicates the type of spanning tree path
         cost mode used by the switch. The mode applies to all instances of the
         Spanning Tree protocol running on the switch.
  
         When the value of this MIB object is changed, the path cost
         of all ports will be reassigned to the default path cost
         values based on the new spanning tree path cost mode and the
         ports' speed.
  
         When the value of this MIB object is set to long(2),
         the xstInstancePortPathCost MIB object must be used in order
         to retrieve/configure the spanning tree port path cost as a
         32-bit value. The set operation on dot1dStpPortPathCost in
         BRIDGE-MIB will be rejected. While retrieving the value of
         dot1dStpPortPathCost, the maximum value of 65535 will be
         returned if the value of xstInstancePortPathCost for the same
         instance exceeds 65535.
  
         When the value of this MIB object is set to short(1),
         the dot1dStpPortPathCost in BRIDGE-MIB must be used."
       ::= { xstInstanceCfgEntry 16 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry', 'dot1vProtocolPortEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower']}

  · Download ECS2100_202412100000Z.mib
  Source location: ECS2100-28PP-MIB::xstInstanceCfgPathCostMethod.
  Source version and references

  Downloaded: 2026-10-23T18:27:40.684104+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS2100_202412100000Z.mib

  Module: ECS2100-28PP-MIB

  Published definition

  xstInstanceCfgPathCostMethod OBJECT-TYPE
       SYNTAX      StaPathCostMode
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
         "For RST or MST protocol, this indicates the type of spanning tree path
         cost mode used by the switch. The mode applies to all instances of the
         Spanning Tree protocol running on the switch.
  
         When the value of this MIB object is changed, the path cost
         of all ports will be reassigned to the default path cost
         values based on the new spanning tree path cost mode and the
         ports' speed.
  
         When the value of this MIB object is set to long(2),
         the xstInstancePortPathCost MIB object must be used in order
         to retrieve/configure the spanning tree port path cost as a
         32-bit value. The set operation on dot1dStpPortPathCost in
         BRIDGE-MIB will be rejected. While retrieving the value of
         dot1dStpPortPathCost, the maximum value of 65535 will be
         returned if the value of xstInstancePortPathCost for the same
         instance exceeds 65535.
  
         When the value of this MIB object is set to short(1),
         the dot1dStpPortPathCost in BRIDGE-MIB must be used."
       ::= { xstInstanceCfgEntry 16 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry', 'dot1vProtocolPortEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower']}

  · Download ECS2100_202412100000Z.mib
  Source location: ECS2100-28PP-MIB::xstInstanceCfgPathCostMethod.
  Source version and references

  Downloaded: 2026-10-23T18:27:43.223217+00:00.

• Edgecore MIB copies (Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. Edgecore support.

  Module: ECS2100-MIB

  Published definition

  xstInstanceCfgPathCostMethod OBJECT-TYPE
       SYNTAX      StaPathCostMode
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
         "For RST or MST protocol, this indicates the type of spanning tree path
         cost mode used by the switch. The mode applies to all instances of the
         Spanning Tree protocol running on the switch.
  
         When the value of this MIB object is changed, the path cost
         of all ports will be reassigned to the default path cost
         values based on the new spanning tree path cost mode and the
         ports' speed.
  
         When the value of this MIB object is set to long(2),
         the xstInstancePortPathCost MIB object must be used in order
         to retrieve/configure the spanning tree port path cost as a
         32-bit value. The set operation on dot1dStpPortPathCost in
         BRIDGE-MIB will be rejected. While retrieving the value of
         dot1dStpPortPathCost, the maximum value of 65535 will be
         returned if the value of xstInstancePortPathCost for the same
         instance exceeds 65535.
  
         When the value of this MIB object is set to short(1),
         the dot1dStpPortPathCost in BRIDGE-MIB must be used."
       ::= { xstInstanceCfgEntry 16 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry', 'dot1vProtocolPortEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower']}

  · Download ECS2100-MIB

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: ECS2100-MIB::xstInstanceCfgPathCostMethod.
  Source version and references

  Downloaded: 2026-10-23T19:26:18.121247+00:00.

• Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: ECS2100-MIB

  Vendor MIB copy from the LibreNMS archive.

  Module: ECS2100-MIB

  Published definition

  xstInstanceCfgPathCostMethod OBJECT-TYPE
       SYNTAX      StaPathCostMode
       MAX-ACCESS  read-only
       STATUS      current
       DESCRIPTION
         "For RST or MST protocol, this indicates the type of spanning tree path
         cost mode used by the switch. The mode applies to all instances of the
         Spanning Tree protocol running on the switch.
  
         When the value of this MIB object is changed, the path cost
         of all ports will be reassigned to the default path cost
         values based on the new spanning tree path cost mode and the
         ports' speed.
  
         When the value of this MIB object is set to long(2),
         the xstInstancePortPathCost MIB object must be used in order
         to retrieve/configure the spanning tree port path cost as a
         32-bit value. The set operation on dot1dStpPortPathCost in
         BRIDGE-MIB will be rejected. While retrieving the value of
         dot1dStpPortPathCost, the maximum value of 65535 will be
         returned if the value of xstInstancePortPathCost for the same
         instance exceeds 65535.
  
         When the value of this MIB object is set to short(1),
         the dot1dStpPortPathCost in BRIDGE-MIB must be used."
       ::= { xstInstanceCfgEntry 16 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'TEXTUAL-CONVENTION', 'MacAddress'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry', 'dot1vProtocolPortEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  · Download ECS2100-MIB

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: ECS2100-MIB::xstInstanceCfgPathCostMethod.
  Source version and references

  Downloaded: 2026-10-24T02:14:14.709311+00:00.