Reference record for OID 1.3.6.1.4.1.259.10.1.45.1.2.3.2.1.3

cableDiagResultStatusPairB

Status in source: current.

Names: cableDiagResultStatusPairB

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "cableDiagResultStatusPairB",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "notTestedYet",
    "(",
    "1",
    ")",
    ",",
    "ok",
    "(",
    "2",
    ")",
    ",",
    "open",
    "(",
    "3",
    ")",
    ",",
    "short",
    "(",
    "4",
    ")",
    ",",
    "openShort",
    "(",
    "5",
    ")",
    ",",
    "crosstalk",
    "(",
    "6",
    ")",
    ",",
    "unknown",
    "(",
    "7",
    ")",
    ",",
    "impedanceMismatch",
    "(",
    "8",
    ")",
    ",",
    "failed",
    "(",
    "9",
    ")",
    ",",
    "notSupported",
    "(",
    "10",
    ")",
    ",",
    "noCable",
    "(",
    "11",
    ")",
    "}",
    "MAX-ACCESS",
    "read-only",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable.\"",
    "::=",
    "{",
    "cableDiagResultEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "notTestedYet",
            1
          ],
          [
            "ok",
            2
          ],
          [
            "open",
            3
          ],
          [
            "short",
            4
          ],
          [
            "openShort",
            5
          ],
          [
            "crosstalk",
            6
          ],
          [
            "unknown",
            7
          ],
          [
            "impedanceMismatch",
            8
          ],
          [
            "failed",
            9
          ],
          [
            "notSupported",
            10
          ],
          [
            "noCable",
            11
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-only"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The result of cable diagnostics. If there is no fault on the cable, the value is ok(2). Value notTestedYet(1) means the pair is not tested yet. Value ok(2) means the pair works well. Value open(3) means there is a lack of continuity between pins at each end of the pair. Value short(4) means conductors are short-circuited together on the pair. Value openShort(5) means the pair has open and short issues. Value crosstalk(6) means the pair is incorrectly connected at one end. Value unknown(7) means pair has an error matching none of the above. Value impedanceMismatch(8) means different quality cables connected together. Value failed(9) means test failed. Value notSupported(10) means cable diagnostics is not supported. Value noCable(11) means there is no connected cable."
    ],
    null,
    null,
    null,
    null
  ]
}

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS4120-Series_202604160000Z.mib

  Module: ECS4120-MIB

  Published definition

  cableDiagResultStatusPairB OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                          notTestedYet(1),
                          ok(2),
                          open(3),
                          short(4),
                          openShort(5),
                          crosstalk(6),
                          unknown(7),
                          impedanceMismatch(8),
                          failed(9),
                          notSupported(10),
                          noCable(11)
                      }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION "The result of cable diagnostics. If there is no fault
                       on the cable, the value is ok(2). Value notTestedYet(1)
                       means the pair is not tested yet. Value ok(2) means the
                       pair works well. Value open(3) means there is a lack of
                       continuity between pins at each end of the pair. Value
                       short(4) means conductors are short-circuited together on
                       the pair. Value openShort(5) means the pair has open
                       and short issues. Value crosstalk(6) means the pair is
                       incorrectly connected at one end. Value unknown(7) means
                       pair has an error matching none of the above. Value
                       impedanceMismatch(8) means different quality cables
                       connected together. Value failed(9) means test failed.
                       Value notSupported(10) means cable diagnostics is not
                       supported. Value noCable(11) means there is no connected
                       cable."
          ::= { cableDiagResultEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'RowPointer'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Gauge32'], 'DIFFSERV-MIB': ['diffServClfrEntry', 'diffServMultiFieldClfrEntry', 'IndexIntegerNextFree', 'IndexInteger'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'TOKEN-RING-RMON-MIB': ['MacAddress']}

  
  Source location: ECS4120-MIB::cableDiagResultStatusPairB.
  Source version and references

  Same file in 59399308092441.

  Same file in 60617942423449.

  Downloaded: 2026-10-23T18:27:39.118815+00:00.

• Edgecore MIB copies (Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. Edgecore support.

  Module: ECS4120-MIB

  Published definition

  cableDiagResultStatusPairB OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                          notTestedYet(1),
                          ok(2),
                          open(3),
                          short(4),
                          openShort(5),
                          crosstalk(6),
                          unknown(7),
                          impedanceMismatch(8),
                          failed(9),
                          notSupported(10),
                          noCable(11)
                      }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION "The result of cable diagnostics. If there is no fault
                       on the cable, the value is ok(2). Value notTestedYet(1)
                       means the pair is not tested yet. Value ok(2) means the
                       pair works well. Value open(3) means there is a lack of
                       continuity between pins at each end of the pair. Value
                       short(4) means conductors are short-circuited together on
                       the pair. Value openShort(5) means the pair has open
                       and short issues. Value crosstalk(6) means the pair is
                       incorrectly connected at one end. Value unknown(7) means
                       pair has an error matching none of the above. Value
                       impedanceMismatch(8) means different quality cables
                       connected together. Value failed(9) means test failed.
                       Value notSupported(10) means cable diagnostics is not
                       supported. Value noCable(11) means there is no connected
                       cable."
          ::= { cableDiagResultEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'RowPointer'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Gauge32'], 'DIFFSERV-MIB': ['diffServClfrEntry', 'diffServMultiFieldClfrEntry', 'IndexIntegerNextFree', 'IndexInteger'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'TOKEN-RING-RMON-MIB': ['MacAddress']}

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: ECS4120-MIB::cableDiagResultStatusPairB.
  Source version and references

  Downloaded: 2026-10-23T19:26:18.110247+00:00.

• Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: ECS4120-MIB

  Vendor MIB copy from the LibreNMS archive.

  Module: ECS4120-MIB

  Published definition

  cableDiagResultStatusPairB OBJECT-TYPE
          SYNTAX      INTEGER
                      {
                          notTestedYet(1),
                          ok(2),
                          open(3),
                          short(4),
                          openShort(5),
                          crosstalk(6),
                          unknown(7),
                          impedanceMismatch(8),
                          failed(9),
                          notSupported(10),
                          noCable(11)
                      }
          MAX-ACCESS  read-only
          STATUS      current
          DESCRIPTION "The result of cable diagnostics. If there is no fault
                       on the cable, the value is ok(2). Value notTestedYet(1)
                       means the pair is not tested yet. Value ok(2) means the
                       pair works well. Value open(3) means there is a lack of
                       continuity between pins at each end of the pair. Value
                       short(4) means conductors are short-circuited together on
                       the pair. Value openShort(5) means the pair has open
                       and short issues. Value crosstalk(6) means the pair is
                       incorrectly connected at one end. Value unknown(7) means
                       pair has an error matching none of the above. Value
                       impedanceMismatch(8) means different quality cables
                       connected together. Value failed(9) means test failed.
                       Value notSupported(10) means cable diagnostics is not
                       supported. Value noCable(11) means there is no connected
                       cable."
          ::= { cableDiagResultEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'DisplayString', 'RowStatus', 'TruthValue', 'RowPointer'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'Counter64', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Gauge32'], 'DIFFSERV-MIB': ['diffServClfrEntry', 'diffServMultiFieldClfrEntry', 'IndexIntegerNextFree', 'IndexInteger'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry', 'pethPsePortDetectionStatus', 'pethMainPseConsumptionPower'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString'], 'TOKEN-RING-RMON-MIB': ['MacAddress']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: ECS4120-MIB::cableDiagResultStatusPairB.
  Source version and references

  Downloaded: 2026-10-24T02:14:14.732310+00:00.