Reference record for OID 1.3.6.1.4.1.259.10.1.51.1.13.5

prioIpDscpRestoreDefault

Status in source: current.

Names: prioIpDscpRestoreDefault

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "prioIpDscpRestoreDefault",
    "OBJECT-TYPE",
    "SYNTAX",
    "Integer32",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Enables the IP DSCP settings of a port to be reset to their defaults. To reset the IP DSCP settings of a port, assign the value of the relevant ifIndex defined by the ifIndex in the IF-MIB. For example, assigning the value 1 will result in the IP DSCP settings of port 1 being restored to their default. 0 will always be obtained when reading this variable\"",
    "::=",
    "{",
    "priorityMgt",
    "5",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "Integer32"
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Enables the IP DSCP settings of a port to be reset to their defaults. To reset the IP DSCP settings of a port, assign the value of the relevant ifIndex defined by the ifIndex in the IF-MIB. For example, assigning the value 1 will result in the IP DSCP settings of port 1 being restored to their default. 0 will always be obtained when reading this variable"
    ],
    null,
    null,
    null,
    null
  ]
}

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS5520-202507240000Z.mib

  Module: ECS5520-MIB

  Published definition

  prioIpDscpRestoreDefault OBJECT-TYPE
          SYNTAX      Integer32
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Enables the IP DSCP settings of a port to be reset to their
                       defaults. To reset the IP DSCP settings of a port, assign
                       the value of the relevant ifIndex defined by the ifIndex in
                       the IF-MIB. For example, assigning the value 1 will result in
                       the IP DSCP settings of port 1 being restored to their default.
                       0 will always be obtained when reading this variable"
          ::= { priorityMgt 5 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS5520-MIB::prioIpDscpRestoreDefault.
  Source version and references

  Same file in 60632294621465.

  Same file in 59397579882521.

  Same file in 58627631718425.

  Downloaded: 2026-10-23T18:27:36.338745+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS5520_l3_202507240000Z.mib

  Module: ECS5520-MIB

  Published definition

  prioIpDscpRestoreDefault OBJECT-TYPE
          SYNTAX      Integer32
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Enables the IP DSCP settings of a port to be reset to their
                       defaults. To reset the IP DSCP settings of a port, assign
                       the value of the relevant ifIndex defined by the ifIndex in
                       the IF-MIB. For example, assigning the value 1 will result in
                       the IP DSCP settings of port 1 being restored to their default.
                       0 will always be obtained when reading this variable"
          ::= { priorityMgt 5 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS5520-MIB::prioIpDscpRestoreDefault.
  Source version and references

  Same file in 60632969900825.

  Downloaded: 2026-10-23T18:27:41.216671+00:00.

• Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: ECS5520-MIB

  Vendor MIB copy from the LibreNMS archive.

  Module: ECS5520-MIB

  Published definition

  prioIpDscpRestoreDefault OBJECT-TYPE
          SYNTAX      Integer32
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Enables the IP DSCP settings of a port to be reset to their
                       defaults. To reset the IP DSCP settings of a port, assign
                       the value of the relevant ifIndex defined by the ifIndex in
                       the IF-MIB. For example, assigning the value 1 will result in
                       the IP DSCP settings of port 1 being restored to their default.
                       0 will always be obtained when reading this variable"
          ::= { priorityMgt 5 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: ECS5520-MIB::prioIpDscpRestoreDefault.
  Source version and references

  Downloaded: 2026-10-24T02:14:14.768310+00:00.

• Edgecore MIB copies (Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. Edgecore support.

  Module: ECS5520-MIB

  Published definition

  prioIpDscpRestoreDefault OBJECT-TYPE
          SYNTAX      Integer32
          MAX-ACCESS  read-write
          STATUS      current
          DESCRIPTION "Enables the IP DSCP settings of a port to be reset to their
                       defaults. To reset the IP DSCP settings of a port, assign
                       the value of the relevant ifIndex defined by the ifIndex in
                       the IF-MIB. For example, assigning the value 1 will result in
                       the IP DSCP settings of port 1 being restored to their default.
                       0 will always be obtained when reading this variable"
          ::= { priorityMgt 5 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: ECS5520-MIB::prioIpDscpRestoreDefault.
  Source version and references

  Downloaded: 2026-10-23T19:26:18.086248+00:00.