Reference record for OID 1.3.6.1.4.1.259.10.1.51.1.49.3

upnpTtl

Status in source: current.

Names: upnpTtl

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "upnpTtl",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "(",
    "1",
    ".",
    ".",
    "255",
    ")",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"Specifies the TTL value of the UPnP advertising messages sent by the switch. When the TTL value is greater than 1, it is possible to send UPnP advertising messages to traverse multiple routers; at the same time, the UPnP device will send an IGMP Join message to the traverse multiple routers so that the routers will forward multicast messages to the UPnP device.\"",
    "::=",
    "{",
    "upnpMgt",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "integerSubType",
        [
          [
            1,
            255
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "Specifies the TTL value of the UPnP advertising messages sent by the switch. When the TTL value is greater than 1, it is possible to send UPnP advertising messages to traverse multiple routers; at the same time, the UPnP device will send an IGMP Join message to the traverse multiple routers so that the routers will forward multicast messages to the UPnP device."
    ],
    null,
    null,
    null,
    null
  ]
}

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS5520-202507240000Z.mib

  Module: ECS5520-MIB

  Published definition

  upnpTtl    OBJECT-TYPE
      SYNTAX      INTEGER (1..255)
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION "Specifies the TTL value of the UPnP advertising messages sent by
                   the switch. When the TTL value is greater than 1, it is possible
                   to send UPnP advertising messages to traverse multiple routers;
                   at the same time, the UPnP device will send an IGMP Join message
                   to the traverse multiple routers so that the routers will forward
                   multicast messages to the UPnP device."
      ::= { upnpMgt 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS5520-MIB::upnpTtl.
  Source version and references

  Same file in 60632294621465.

  Same file in 59397579882521.

  Same file in 58627631718425.

  Downloaded: 2026-10-23T18:27:36.338745+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS5520_l3_202507240000Z.mib

  Module: ECS5520-MIB

  Published definition

  upnpTtl    OBJECT-TYPE
      SYNTAX      INTEGER (1..255)
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION "Specifies the TTL value of the UPnP advertising messages sent by
                   the switch. When the TTL value is greater than 1, it is possible
                   to send UPnP advertising messages to traverse multiple routers;
                   at the same time, the UPnP device will send an IGMP Join message
                   to the traverse multiple routers so that the routers will forward
                   multicast messages to the UPnP device."
      ::= { upnpMgt 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS5520-MIB::upnpTtl.
  Source version and references

  Same file in 60632969900825.

  Downloaded: 2026-10-23T18:27:41.216671+00:00.

• Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: ECS5520-MIB

  Vendor MIB copy from the LibreNMS archive.

  Module: ECS5520-MIB

  Published definition

  upnpTtl    OBJECT-TYPE
      SYNTAX      INTEGER (1..255)
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION "Specifies the TTL value of the UPnP advertising messages sent by
                   the switch. When the TTL value is greater than 1, it is possible
                   to send UPnP advertising messages to traverse multiple routers;
                   at the same time, the UPnP device will send an IGMP Join message
                   to the traverse multiple routers so that the routers will forward
                   multicast messages to the UPnP device."
      ::= { upnpMgt 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: ECS5520-MIB::upnpTtl.
  Source version and references

  Downloaded: 2026-10-24T02:14:14.768310+00:00.

• Edgecore MIB copies (Observium Community) · Publisher's source file: Source package: observium-community-latest.tar.gz

  Vendor MIB copy from the Observium Community archive. Edgecore support.

  Module: ECS5520-MIB

  Published definition

  upnpTtl    OBJECT-TYPE
      SYNTAX      INTEGER (1..255)
      MAX-ACCESS  read-write
      STATUS      current
      DESCRIPTION "Specifies the TTL value of the UPnP advertising messages sent by
                   the switch. When the TTL value is greater than 1, it is possible
                   to send UPnP advertising messages to traverse multiple routers;
                   at the same time, the UPnP device will send an IGMP Join message
                   to the traverse multiple routers so that the routers will forward
                   multicast messages to the UPnP device."
      ::= { upnpMgt 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  Related source files and packages:

  • Observium Community original distribution archivePublisher Last-Modified: Tue, 05 May 2026 13:47:48 GMT; 127.4 MiB
  
  Source location: ECS5520-MIB::upnpTtl.
  Source version and references

  Downloaded: 2026-10-23T19:26:18.086248+00:00.