Reference record for OID 1.3.6.1.4.1.259.10.1.55.1.10.16.1.3

iPAddrSubnetMask

Status in source: current.

Names: iPAddrSubnetMask

{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "iPAddrSubnetMask",
    "OBJECT-TYPE",
    "SYNTAX",
    "IpAddress",
    "MAX-ACCESS",
    "not-accessible",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).\"",
    "::=",
    "{",
    "iPAddrEntry",
    "3",
    "}"
  ],
  "syntax_tree": [
    [
      "ApplicationSyntax",
      "IpAddress",
      null
    ],
    null,
    [
      "MaxAccessPart",
      "not-accessible"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "The subnet mask of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask are 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device)."
    ],
    null,
    null,
    null,
    null
  ]
}

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS4150_20250806p.mib

  Module: ECS4150-MIB

  Published definition

  iPAddrSubnetMask  OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
          "The subnet mask of this Net interface.  The default value
          for this object is 0.0.0.0.  If either the IPAddrIPAddress
          or IPAddrSubnetMask are 0.0.0.0, then when the device
          boots, it may use BOOTP to try to figure out what these
          values should be. If BOOTP fails, before the device
          can talk on the network, this value must be configured
          (e.g., through a terminal attached to the device)."
      ::= { iPAddrEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS4150-MIB::iPAddrSubnetMask.
  Source version and references

  Same file in 55684972545049.

  Downloaded: 2026-10-23T18:27:38.309065+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS4150_202603310000Z.mib

  Module: ECS4150-MIB

  Published definition

  iPAddrSubnetMask  OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
          "The subnet mask of this Net interface.  The default value
          for this object is 0.0.0.0.  If either the IPAddrIPAddress
          or IPAddrSubnetMask are 0.0.0.0, then when the device
          boots, it may use BOOTP to try to figure out what these
          values should be. If BOOTP fails, before the device
          can talk on the network, this value must be configured
          (e.g., through a terminal attached to the device)."
      ::= { iPAddrEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS4150-MIB::iPAddrSubnetMask.
  Source version and references

  Downloaded: 2026-10-23T18:27:37.449889+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS4150_202605180000Z.mib

  Module: ECS4150-MIB

  Published definition

  iPAddrSubnetMask  OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
          "The subnet mask of this Net interface.  The default value
          for this object is 0.0.0.0.  If either the IPAddrIPAddress
          or IPAddrSubnetMask are 0.0.0.0, then when the device
          boots, it may use BOOTP to try to figure out what these
          values should be. If BOOTP fails, before the device
          can talk on the network, this value must be configured
          (e.g., through a terminal attached to the device)."
      ::= { iPAddrEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS4150-MIB::iPAddrSubnetMask.
  Source version and references

  Same file in 62786165040153.

  Downloaded: 2026-10-23T18:27:39.349916+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS4150_202606120000Z.mib

  Module: ECS4150-MIB

  Published definition

  iPAddrSubnetMask  OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
          "The subnet mask of this Net interface.  The default value
          for this object is 0.0.0.0.  If either the IPAddrIPAddress
          or IPAddrSubnetMask are 0.0.0.0, then when the device
          boots, it may use BOOTP to try to figure out what these
          values should be. If BOOTP fails, before the device
          can talk on the network, this value must be configured
          (e.g., through a terminal attached to the device)."
      ::= { iPAddrEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS4150-MIB::iPAddrSubnetMask.
  Source version and references

  Downloaded: 2026-10-23T18:27:44.768000+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS4150_202605120000Z.mib

  Module: ECS4150TIP-MIB

  Published definition

  iPAddrSubnetMask  OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
          "The subnet mask of this Net interface.  The default value
          for this object is 0.0.0.0.  If either the IPAddrIPAddress
          or IPAddrSubnetMask are 0.0.0.0, then when the device
          boots, it may use BOOTP to try to figure out what these
          values should be. If BOOTP fails, before the device
          can talk on the network, this value must be configured
          (e.g., through a terminal attached to the device)."
      ::= { iPAddrEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS4150TIP-MIB::iPAddrSubnetMask.
  Source version and references

  Downloaded: 2026-10-23T18:27:42.970294+00:00.

• Edgecore official enterprise switch MIBs · Publisher's source file: ECS4150_202609220000Z.mib

  Module: ECS4150TIP-MIB

  Published definition

  iPAddrSubnetMask  OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
          "The subnet mask of this Net interface.  The default value
          for this object is 0.0.0.0.  If either the IPAddrIPAddress
          or IPAddrSubnetMask are 0.0.0.0, then when the device
          boots, it may use BOOTP to try to figure out what these
          values should be. If BOOTP fails, before the device
          can talk on the network, this value must be configured
          (e.g., through a terminal attached to the device)."
      ::= { iPAddrEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  
  Source location: ECS4150TIP-MIB::iPAddrSubnetMask.
  Source version and references

  Downloaded: 2026-10-23T18:27:45.671041+00:00.

• Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community) · Publisher's source file: ECS4150-MIB

  Vendor MIB copy from the LibreNMS archive.

  Module: ECS4150-MIB

  Published definition

  iPAddrSubnetMask  OBJECT-TYPE
      SYNTAX     IpAddress
      MAX-ACCESS not-accessible
      STATUS     current
      DESCRIPTION
          "The subnet mask of this Net interface.  The default value
          for this object is 0.0.0.0.  If either the IPAddrIPAddress
          or IPAddrSubnetMask are 0.0.0.0, then when the device
          boots, it may use BOOTP to try to figure out what these
          values should be. If BOOTP fails, before the device
          can talk on the network, this value must be configured
          (e.g., through a terminal attached to the device)."
      ::= { iPAddrEntry 3 }

  Module imports

  {'IF-MIB': ['InterfaceIndex', 'ifIndex', 'ifOperStatus'], 'OSPF-MIB': ['TOSType', 'Metric'], 'SNMPv2-TC': ['DisplayString', 'RowStatus', 'TruthValue', 'MacAddress', 'TEXTUAL-CONVENTION'], 'BRIDGE-MIB': ['BridgeId', 'Timeout', 'dot1dStpPort', 'dot1dStpPortEntry'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'Unsigned32', 'Integer32', 'Counter32', 'IpAddress', 'NOTIFICATION-TYPE', 'enterprises', 'TimeTicks', 'Counter64', 'Gauge32'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList', 'VlanIndex', 'VlanId', 'dot1qVlanStaticEntry'], 'IEEE8021-CFM-MIB': ['Dot1agCfmMepId', 'dot1agCfmMdIndex', 'dot1agCfmMaIndex', 'dot1agCfmMepIdentifier', 'dot1agCfmMepIdentifier', 'dot1agCfmMepDbRMepIdentifier'], 'IEEE8021-PAE-MIB': ['dot1xAuthConfigEntry'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressPrefixLength'], 'POWER-ETHERNET-MIB': ['pethPsePortEntry', 'pethMainPseEntry']}

  Related source files and packages:

  • LibreNMS original distribution archiveFile: librenms/librenms/tar.gz/…; 80.2 MiB
  • Archive revision metadata: librenms/librenms (JSON)File: repos/librenms/librenms/commits/master; 36,945 bytes
  
  Source location: ECS4150-MIB::iPAddrSubnetMask.
  Source version and references

  Downloaded: 2026-10-24T02:14:14.738310+00:00.