Status in source: current.
Technical details
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"cHsrpGrpEntry",
"OBJECT-TYPE",
"SYNTAX",
"CHsrpGrpEntry",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"Information about an HSRP group. Management applications use cHsrpGrpRowStatus to control entry modification, creation and deletion. Setting cHsrpGrpRowStatus to 'active' causes the router to communicate using HSRP. The value of cHsrpGrpRowStatus may be set to 'destroy' at any time. Entries may not be created via SNMP without explicitly setting cHsrpGrpRowStatus to either 'createAndGo' or 'createAndWait'. Entries can be created and modified via the management protocol or by the device's local management interface. A management application wishing to create an entry should choose the ifIndex of the interface which is to be added as part of an HSRP group. Also, a cHsrpGrpNumber should be chosen. A group number is unique only amongst the groups on a particular interface. The value of the group number appears in packets which are transmitted and received on a LAN segment to which the router is connected. The application must select the group number as explained in the description for cHsrpGrpNumber. If the row is not active, and a local management interface command modifies that row, the row may transition to active state. A row which is not in active state will timeout after a configurable period (five minutes by default). This timeout period can be changed by setting cHsrpConfigTimeout.\"",
"INDEX",
"{",
"ifIndex",
",",
"cHsrpGrpNumber",
"}",
"::=",
"{",
"cHsrpGrpTable",
"1",
"}"
],
"syntax_tree": [
[
"row",
"CHsrpGrpEntry"
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Information about an HSRP group. Management applications use cHsrpGrpRowStatus to control entry modification, creation and deletion. Setting cHsrpGrpRowStatus to 'active' causes the router to communicate using HSRP. The value of cHsrpGrpRowStatus may be set to 'destroy' at any time. Entries may not be created via SNMP without explicitly setting cHsrpGrpRowStatus to either 'createAndGo' or 'createAndWait'. Entries can be created and modified via the management protocol or by the device's local management interface. A management application wishing to create an entry should choose the ifIndex of the interface which is to be added as part of an HSRP group. Also, a cHsrpGrpNumber should be chosen. A group number is unique only amongst the groups on a particular interface. The value of the group number appears in packets which are transmitted and received on a LAN segment to which the router is connected. The application must select the group number as explained in the description for cHsrpGrpNumber. If the row is not active, and a local management interface command modifies that row, the row may transition to active state. A row which is not in active state will timeout after a configurable period (five minutes by default). This timeout period can be changed by setting cHsrpConfigTimeout."
],
null,
null,
[
"INDEX",
[
[
0,
"ifIndex"
],
[
0,
"cHsrpGrpNumber"
]
]
],
null
]
}