{1 3 6 1 4 1 259 8 1 3 100 4 3 1 2}
The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).
Status in source: current.
Names: iPAddrIPAddress
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"iPAddrIPAddress",
"OBJECT-TYPE",
"SYNTAX",
"IpAddress",
"MAX-ACCESS",
"not-accessible",
"STATUS",
"current",
"DESCRIPTION",
"\"The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device).\"",
"::=",
"{",
"iPAddrEntry",
"2",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"IpAddress",
null
],
null,
[
"MaxAccessPart",
"not-accessible"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"The IP address of this Net interface. The default value for this object is 0.0.0.0. If either the IPAddrIPAddress or IPAddrSubnetMask is 0.0.0.0, then when the device boots, it may use BOOTP to try to figure out what these values should be. If BOOTP fails, before the device can talk on the network, this value must be configured (e.g., through a terminal attached to the device)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. Edgecore support.
Module: ES4626-SFP-MIB
iPAddrIPAddress OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of this Net interface. The default value
for this object is 0.0.0.0. If either the IPAddrIPAddress
or IPAddrSubnetMask is 0.0.0.0, then when the device
boots, it may use BOOTP to try to figure out what these
values should be. If BOOTP fails, before the device
can talk on the network, this value must be configured
(e.g., through a terminal attached to the device)."
::= { iPAddrEntry 2 }{'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['TEXTUAL-CONVENTION', 'RowStatus', 'TimeStamp', 'TruthValue'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'MODULE-IDENTITY', 'OBJECT-TYPE', 'mib-2', 'Integer32', 'Counter32', 'Gauge32', 'Unsigned32', 'NOTIFICATION-TYPE', 'IpAddress', 'TimeTicks', 'experimental'], 'RFC1155-SMI': ['enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Downloaded: 2026-10-23T19:26:18.275242+00:00.
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.259.8.1.3.100.4.3.1.1 | iPAddrVid | 0 | 0 | |
| 1.3.6.1.4.1.259.8.1.3.100.4.3.1.3 | iPAddrSubnetMask | 0 | 0 | |
| 1.3.6.1.4.1.259.8.1.3.100.4.3.1.4 | iPAddrPrimaryInterface | 0 | 0 | |
| 1.3.6.1.4.1.259.8.1.3.100.4.3.1.5 | iPAddrStatus | 0 | 0 |