authenticating with the remote peer
Sources for this description
Circitor
Parsed from APTIS-CONFIG-MIB.mib · APTIS-CONFIG-MIB
Source file: Download APTIS-CONFIG-MIB.mib
Source file: Download aptis_config.mi2.txt
OID reference
1.3.6.1.4.1.2637.2.1.1314.1.634
A protocol that is acceptable for use when authenticating with the remote peer
Identification
{1 3 6 1 4 1 2637 2 1 1314 1 634}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 0 | none | 1, 2 |
| 49187 | pap | 1, 2 |
| 49699 | chap | 1, 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition. The index encoding is not inferred here.
Published row index: pppModemConfigPathString.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.2637.2.1.1314.1.634
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Parsed from APTIS-CONFIG-MIB.mib · APTIS-CONFIG-MIB
Source file: Download APTIS-CONFIG-MIB.mib
Source file: Download aptis_config.mi2.txt
Historical records
pppModemConfigAuthClientProtocol4 OBJECT-TYPE
SYNTAX INTEGER {
none(0),
chap(49699),
pap(49187)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"A protocol that is acceptable for use when
authenticating with the remote peer"
::= { pppModemConfigEntry 634 }
pppModemConfigAuthClientProtocol4 OBJECT-TYPE
SYNTAX INTEGER {
none(0),
chap(49699),
pap(49187)
}
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"A protocol that is acceptable for use when
authenticating with the remote peer"
DEFVAL { none }
::= { pppModemConfigEntry 634 }
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2637.2.1.1314.1.622 | pppModemConfigAuthServerProtocol3 | 0 | 0 | 3rd preference for authentication protocol to use when authenticating the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.623 | pppModemConfigAuthServerProtocol4 | 0 | 0 | 4th preference for authentication protocol to use when authenticating the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.631 | pppModemConfigAuthClientProtocol1 | 0 | 0 | A protocol that is acceptable for use when authenticating with the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.632 | pppModemConfigAuthClientProtocol2 | 0 | 0 | A protocol that is acceptable for use when authenticating with the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.633 | pppModemConfigAuthClientProtocol3 | 0 | 0 | A protocol that is acceptable for use when authenticating with the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.641 | pppModemConfigPAPClientRetries | 0 | 0 | Number of retries Password Authentication Protocol client will make when attempting to authenticate with the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.642 | pppModemConfigPAPClientTimeout | 0 | 0 | Time between transmitted Password Authentication Protocol Authenticate-Request frames |
| 1.3.6.1.4.1.2637.2.1.1314.1.643 | pppModemConfigPAPServerRetries | 0 | 0 | Number of authentication attempts granted to the remote peer when using the Password Authentication Protocol |
| 1.3.6.1.4.1.2637.2.1.1314.1.644 | pppModemConfigPAPServerTimeout | 0 | 0 | Not sure this applies... |
| 1.3.6.1.4.1.2637.2.1.1314.1.651 | pppModemConfigCHAPClientRetries | 0 | 0 | Number of retries the CHAP client will make when attempting to authenticate with the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.652 | pppModemConfigCHAPClientTimeout | 0 | 0 | Time between transmitted CHAP Response frames |
| 1.3.6.1.4.1.2637.2.1.1314.1.653 | pppModemConfigCHAPServerRetries | 0 | 0 | Number of authentication attempts granted to the remote peer when using CHAP |
| 1.3.6.1.4.1.2637.2.1.1314.1.654 | pppModemConfigCHAPServerChallenges | 0 | 0 | Number of unanswered Challenge frames sent to the remote peer when using CHAP |
| 1.3.6.1.4.1.2637.2.1.1314.1.655 | pppModemConfigCHAPServerTimeout | 0 | 0 | Time between transmitted CHAP Challenge frames |
| 1.3.6.1.4.1.2637.2.1.1314.1.656 | pppModemConfigCHAPValueLength | 0 | 0 | The length (in octets) of the CHAP Value sent to the remote user in CHAP Challenge frames. This number must be a factor of 4. Not… |
| 1.3.6.1.4.1.2637.2.1.1314.1.657 | pppModemConfigAuthFailureRenegotiatesLCP | 0 | 0 | Determines what occurs after an authentication failure. If true, and if more than one authentication protocol is enabled (in Auth… |
| 1.3.6.1.4.1.2637.2.1.1314.1.661 | pppModemConfigUserName | 0 | 0 | User name used when attempting to authenticate with the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.662 | pppModemConfigPassword | 0 | 0 | Password used when attempting to authenticate with the remote peer |
| 1.3.6.1.4.1.2637.2.1.1314.1.711 | pppModemConfigIPCPEnabled | 0 | 0 | IP Control Protocol Enabled |
| 1.3.6.1.4.1.2637.2.1.1314.1.712 | pppModemConfigLocalIPAddress | 0 | 0 | IP address assigned to the local side of the PPP link |
| 1.3.6.1.4.1.2637.2.1.1314.1.713 | pppModemConfigRemoteIPAddress | 0 | 0 | IP address assigned to the remote peer of the PPP link |
| 1.3.6.1.4.1.2637.2.1.1314.1.714 | pppModemConfigAllowPeerIPAddress | 0 | 0 | Allow remote peer to specify its IP address. Note that if this option is enabled |
| 1.3.6.1.4.1.2637.2.1.1314.1.715 | pppModemConfigVJEnabled | 0 | 0 | Specifies whether Van Jacobson TCP/IP header compression (as specified in RFC 1144) should be negotiated. Due to bugs in some wid… |
| 1.3.6.1.4.1.2637.2.1.1314.1.716 | pppModemConfigVJSlots | 0 | 0 | Specifies the number of Van Jacobson TCP/IP compression slots to use in each direction (compression and decompression). The defau… |
| 1.3.6.1.4.1.2637.2.1.1314.1.717 | pppModemConfigSendDNS | 0 | 0 | Send configured Domain Name Server addresses to the remote peer, according to RFC 1877 |
| 1.3.6.1.4.1.2637.2.1.1314.1.718 | pppModemConfigSendNBNS | 0 | 0 | Send configured NetBIOS Name Server addresses to the remote peer, according to RFC 1877 |
| 1.3.6.1.4.1.2637.2.1.1314.1.719 | pppModemConfigIPCPMaxConfigure | 0 | 0 | Max-Configure value for IPCP negotiation |
| 1.3.6.1.4.1.2637.2.1.1314.1.720 | pppModemConfigIPCPRestartTimer | 0 | 0 | Time (in milliseconds) between unanswered IPCP Configure-Request frames |
| 1.3.6.1.4.1.2637.2.1.1314.1.721 | pppModemConfigPassiveIPCP | 0 | 0 | Don't send an IPCP Configure-Request frame until either the peer has sent one, or a short timeout has expired |
| 1.3.6.1.4.1.2637.2.1.1314.1.722 | pppModemConfigPassiveIPCPTimeout | 0 | 0 | The amount of time (in milliseconds) that IPCP will wait for the peer to send a Configure-Request before sending one |
| 1.3.6.1.4.1.2637.2.1.1314.1.723 | pppModemConfigDNS1 | 0 | 0 | Primary Doman Name Server address |
| 1.3.6.1.4.1.2637.2.1.1314.1.724 | pppModemConfigDNS2 | 0 | 0 | Secondary Doman Name Server address |
| 1.3.6.1.4.1.2637.2.1.1314.1.725 | pppModemConfigNBNS1 | 0 | 0 | Primary NetBIOS Name Server address |
| 1.3.6.1.4.1.2637.2.1.1314.1.726 | pppModemConfigNBNS2 | 0 | 0 | Secondary NetBIOS Name Server address |
| 1.3.6.1.4.1.2637.2.1.1314.1.727 | pppModemConfigSendLocalIPAddress | 0 | 0 | Specifies when the local IP address should be send to the remote peer in an IPCP Configure-Request frame. If set to Requested, th… |
| 1.3.6.1.4.1.2637.2.1.1314.1.729 | pppModemConfigPeerNSStrategy | 0 | 0 | Specifies how DNS/NBNS values suggested by peer will be handled. They will either be Config-Rejected (Reject), Config-Acked (Ack)… |
| 1.3.6.1.4.1.2637.2.1.1314.1.811 | pppModemConfigMLPEnabled | 0 | 0 | Multilink protocol (MLP) enabled |
| 1.3.6.1.4.1.2637.2.1.1314.1.812 | pppModemConfigMLPMaxLinks | 0 | 0 | Maximum number of links permitted in a Multilink bundle |
| 1.3.6.1.4.1.2637.2.1.1314.1.813 | pppModemConfigMLPFragmentSize | 0 | 0 | Minimum size of a protocol frame that will be fragmented when transmitted with the Multilink protocol |
| 1.3.6.1.4.1.2637.2.1.1314.1.814 | pppModemConfigMLPMaxFragments | 0 | 0 | Maximum number of MLP fragments that a transmit frame will be divided into |
| 1.3.6.1.4.1.2637.2.1.1314.1.815 | pppModemConfigMLPScaleFragments | 0 | 0 | Should Multilink fragment sizes depend on the relative speed of the links? |
| 1.3.6.1.4.1.2637.2.1.1314.1.816 | pppModemConfigMLPSendNullFragments | 0 | 0 | Should Multilink periodically send null fragments to help the remote peer in discarding dead fragments? |
| 1.3.6.1.4.1.2637.2.1.1314.1.817 | pppModemConfigMLPNullFragmentTimeout | 0 | 0 | The amount of time (in seconds) between null Multilink fragments sent to the remote peer. This value is valid only if this featur… |
| 1.3.6.1.4.1.2637.2.1.1314.1.818 | pppModemConfigMLPEndpointDisc | 0 | 0 | Specifies the type of Endpoint Discriminator the CVX should send when negotiating Multilink. Specifying anything but the default … |
| 1.3.6.1.4.1.2637.2.1.1314.1.819 | pppModemConfigMLPGroupNumber | 0 | 0 | Multilink group number. This is valid only when the MLP endpoint discriminator type is set to GroupNumber. This should only be co… |
| 1.3.6.1.4.1.2637.2.1.1314.1.911 | pppModemConfigLogEnabled | 0 | 0 | Specifies whether PPP events should be logged |
| 1.3.6.1.4.1.2637.2.1.1314.1.912 | pppModemConfigLogDump | 0 | 0 | [Not implemented yet]; |
| 1.3.6.1.4.1.2637.2.1.1314.1.920 | pppModemConfigLogSize | 0 | 0 | Number of events in the PPP log buffer. Each log event requires 24 bytes of memory; the default of 128 requires 3K of memory per … |
| 1.3.6.1.4.1.2637.2.1.1314.1.921 | pppModemConfigLogControlFrames | 0 | 0 | If PPP logging is enabled, specifies whether transmitted and received control frames should be logged. Control frames include LCP… |
| 1.3.6.1.4.1.2637.2.1.1314.1.922 | pppModemConfigLogProtocolFrames | 0 | 0 | If PPP logging is enabled, specifies whether transmitted and received protocol frames should be logged. Protocol frames include a… |