Current LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL
Sources for this description
IBM MIB copies (LibreNMS/Observium Community)
OID reference
1.3.6.1.4.1.26543.2.7.4.1.1.21.36
Current LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL
Identification
{1 3 6 1 4 1 26543 2 7 4 1 1 21 36}
| Value | Name |
|---|---|
| 1 | pre-config |
| 2 | login |
| 3 | sasl |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.26543.2.7.4.1.1.21.36.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ldapCurCfgBindmode OBJECT-TYPE
SYNTAX INTEGER {
pre-config(1),
login(2),
sasl(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Current LDAP bind mode:
login: use login creds for binding
pre-config: use binddn creds for binding
sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL"
::= { agLdapConfig 36 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Current LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ldapCurCfgBindmode
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ldapCurCfgBindmode",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"pre-config",
"(",
"1",
")",
",",
"login",
"(",
"2",
")",
",",
"sasl",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Current LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL\"",
"::=",
"{",
"agLdapConfig",
"36",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"pre-config",
1
],
[
"login",
2
],
[
"sasl",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Current LDAP bind mode: login: use login creds for binding pre-config: use binddn creds for binding sasl: use SASL(Simple Authentication and Secure Layer) EXTERNAL"
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. IBM support.
Module: LENOVO-GbTOR-10G-L2L3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Registration