Description 1
Specify the RADIUS port number.
Sources for this description
IBM MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.26543.2.7.4.1.1.3.6
Specify the RADIUS port number.
Identification
{1 3 6 1 4 1 26543 2 7 4 1 1 3 6}
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.26543.2.7.4.1.1.3.6.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
radNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the RADIUS port number."
::= { agRadiusConfig 6 }radNewCfgPort OBJECT-TYPE
SYNTAX INTEGER (1500..3000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Specify the RADIUS port number for authentication."
::= { agRadiusConfig 6 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Specify the RADIUS port number.
IBM MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Description 2
Specify the RADIUS port number for authentication.
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: radNewCfgPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"radNewCfgPort",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1500",
".",
".",
"3000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specify the RADIUS port number.\"",
"::=",
"{",
"agRadiusConfig",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1500,
3000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specify the RADIUS port number."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: IBM-GbTOR-10G-L2L3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Netdisco archive.
Module: IBM-GbTOR-10G-L2L3-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Status in source: current.
Names: radNewCfgPort
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"radNewCfgPort",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"(",
"1500",
".",
".",
"3000",
")",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Specify the RADIUS port number for authentication.\"",
"::=",
"{",
"agRadiusConfig",
"6",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"integerSubType",
[
[
1500,
3000
]
]
]
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Specify the RADIUS port number for authentication."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. IBM support.
Module: LENOVO-GbTOR-10G-L2L3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Registration