Description 1
Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
Sources for this description
IBM MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.4
Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
Identification
{1 3 6 1 4 1 26543 2 7 4 3 1 13 2 1 4}
Definitions may combine these properties differently.
Numbers refer to source variants above. Each value is shown only for variants that define it.
| Value | Name | Source variants |
|---|---|---|
| 1 | none | 1, 2 |
| 2 | password | 1, 2 |
| 3 | md5 | 1 |
| 3 | message-digest | 2 |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In IBM-GbTOR-10G-L2L3-MIB, the row index ospfCurCfgAreaIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.4.<ospfCurCfgAreaIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.4
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
Available source records contain 2 distinct definitions; some records may not include a definition.
ospfCurCfgAreaAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
md5(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
password(2) - use password
md5(3) - use MD5 authentication."
::= { ospfCurCfgAreaEntry 4 }ospfCurCfgAreaAuthType OBJECT-TYPE
SYNTAX INTEGER {
none(1),
password(2),
message-digest(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Type of authentication being used.
none(1) - no authentication
password(2) - use password
message-digest(3) - use message-digest authentication."
::= { ospfCurCfgAreaEntry 4 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Description 1
Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.
IBM MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Description 2
Type of authentication being used. none(1) - no authentication password(2) - use password message-digest(3) - use message-digest authentication.
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ospfCurCfgAreaAuthType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ospfCurCfgAreaAuthType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"1",
")",
",",
"password",
"(",
"2",
")",
",",
"md5",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication.\"",
"::=",
"{",
"ospfCurCfgAreaEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
1
],
[
"password",
2
],
[
"md5",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Type of authentication being used. none(1) - no authentication password(2) - use password md5(3) - use MD5 authentication."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: IBM-GbTOR-10G-L2L3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Netdisco archive.
Module: IBM-GbTOR-10G-L2L3-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Status in source: current.
Names: ospfCurCfgAreaAuthType
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ospfCurCfgAreaAuthType",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"none",
"(",
"1",
")",
",",
"password",
"(",
"2",
")",
",",
"message-digest",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Type of authentication being used. none(1) - no authentication password(2) - use password message-digest(3) - use message-digest authentication.\"",
"::=",
"{",
"ospfCurCfgAreaEntry",
"4",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"none",
1
],
[
"password",
2
],
[
"message-digest",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Type of authentication being used. none(1) - no authentication password(2) - use password message-digest(3) - use message-digest authentication."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. IBM support.
Module: LENOVO-GbTOR-10G-L2L3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.1 | ospfCurCfgAreaIndex | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.2 | ospfCurCfgAreaId | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.3 | ospfCurCfgAreaSpfInterval | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.5 | ospfCurCfgAreaType | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.6 | ospfCurCfgAreaMetric | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.1.13.2.1.7 | ospfCurCfgAreaStatus | 0 | 0 |