OID reference
1.3.6.1.4.1.26543.2.7.4.3.1.7.3
With ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry. With ReARP Refresh disabled, no ARP request will be performed after ReARP Period expires.
Identification
{1 3 6 1 4 1 26543 2 7 4 3 1 7 3}
| Value | Name |
|---|---|
| 2 | enabled |
| 3 | disabled |
At least one MIB declaration places this object in a scalar group. A scalar instance uses the suffix .0.
snmpget [connection options] DEVICE .1.3.6.1.4.1.26543.2.7.4.3.1.7.3.0
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
arpCurCfgReARPRefresh OBJECT-TYPE
SYNTAX INTEGER {
enabled(2),
disabled(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"With ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry.
With ReARP Refresh disabled, no ARP request will be performed after ReARP Period expires."
::= { arpCfg 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
With ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry. With ReARP Refresh disabled, no ARP request will be performed after ReARP Period expires.
IBM MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: arpCurCfgReARPRefresh
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"arpCurCfgReARPRefresh",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"enabled",
"(",
"2",
")",
",",
"disabled",
"(",
"3",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"With ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry. With ReARP Refresh disabled, no ARP request will be performed after ReARP Period expires.\"",
"::=",
"{",
"arpCfg",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"enabled",
2
],
[
"disabled",
3
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"With ReARP Refresh enabled, the system will send an ARP request after the ReARP Period expires, trying to relearn the ARP entry. With ReARP Refresh disabled, no ARP request will be performed after ReARP Period expires."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive. IBM support.
Module: LENOVO-GbTOR-10G-L2L3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.26543.2.7.4.3.1.7.1 | arpCurCfgReARPPeriod | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.1.7.2 | arpNewCfgReARPPeriod | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.1.7.4 | arpNewCfgReARPRefresh | 0 | 0 |