Area Status: active(1), notInService(2), notReady(3).
Sources for this description
IBM MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
OID reference
1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.3
Area Status: active(1), notInService(2), notReady(3).
Identification
{1 3 6 1 4 1 26543 2 7 4 3 3 18 2 1 3}
| Value | Name |
|---|---|
| 1 | active |
| 2 | notInService |
| 3 | notReady |
| 4 | createAndGo |
| 5 | createAndWait |
| 6 | destroy |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In IBM-GbTOR-10G-L2L3-MIB, the row index ospf3AreaInfoIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.3.<ospf3AreaInfoIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.3
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ospf3AreaInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
-- the following two values are states:
-- these values may be read or written
active(1),
notInService(2),
-- the following value is a state:
-- this value may be read, but not written
notReady(3),
-- the following three values are
-- actions: these values may be written,
-- but are never read
createAndGo(4),
createAndWait(5),
destroy(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Area Status:
active(1), notInService(2), notReady(3)."
::= { ospf3AreaInfoEntry 3 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Area Status: active(1), notInService(2), notReady(3).
IBM MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ospf3AreaInfoStatus
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ospf3AreaInfoStatus",
"OBJECT-TYPE",
"SYNTAX",
"INTEGER",
"{",
"active",
"(",
"1",
")",
",",
"notInService",
"(",
"2",
")",
",",
"notReady",
"(",
"3",
")",
",",
"createAndGo",
"(",
"4",
")",
",",
"createAndWait",
"(",
"5",
")",
",",
"destroy",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"Area Status: active(1), notInService(2), notReady(3).\"",
"::=",
"{",
"ospf3AreaInfoEntry",
"3",
"}"
],
"syntax_tree": [
[
"SimpleSyntax",
"INTEGER",
[
"enumSpec",
[
[
"active",
1
],
[
"notInService",
2
],
[
"notReady",
3
],
[
"createAndGo",
4
],
[
"createAndWait",
5
],
[
"destroy",
6
]
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Area Status: active(1), notInService(2), notReady(3)."
],
null,
null,
null,
null
]
}Vendor MIB copy from the LibreNMS archive. IBM support.
Module: IBM-GbTOR-10G-L2L3-MIB
See published definition above
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Same file in Observium Community.
Vendor MIB copy from the Observium Community archive. IBM support.
Module: LENOVO-GbTOR-10G-L2L3-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Vendor MIB copy from the Netdisco archive.
Module: IBM-GbTOR-10G-L2L3-MIB
{'IF-MIB': ['InterfaceIndex', 'InterfaceIndexOrZero'], 'SNMPv2-TC': ['DisplayString', 'PhysAddress', 'MacAddress', 'TruthValue', 'RowStatus', 'TEXTUAL-CONVENTION', 'TruthValue', 'DisplayString', 'PhysAddress', 'MacAddress', 'RowStatus', 'TimeInterval', 'TimeStamp', 'RowPointer', 'AutonomousType', 'StorageType', 'TDomain', 'TAddress'], 'BRIDGE-MIB': ['BridgeId', 'BridgeId', 'dot1dTp', 'dot1dTpPort', 'dot1dBridge', 'dot1dBasePortEntry', 'dot1dBasePort'], 'SNMPv2-SMI': ['OBJECT-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'OBJECT-TYPE', 'MODULE-IDENTITY', 'NOTIFICATION-TYPE', 'OBJECT-IDENTITY', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'TimeTicks', 'IpAddress', 'mib-2'], 'RFC1155-SMI': ['enterprises'], 'RFC1213-MIB': ['sysName', 'sysLocation', 'sysContact', 'ifIndex', 'sysName', 'sysLocation', 'sysContact', 'ifIndex'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP'], 'P-BRIDGE-MIB': ['EnabledStatus'], 'Q-BRIDGE-MIB': ['PortList'], 'INET-ADDRESS-MIB': ['InetAddressType', 'InetAddress', 'InetAddressIPv6', 'InetAddressType', 'InetAddress'], 'SNMP-FRAMEWORK-MIB': ['SnmpAdminString', 'SnmpEngineID', 'SnmpMessageProcessingModel', 'SnmpSecurityModel', 'SnmpSecurityLevel'], 'SNMP-USER-BASED-SM-MIB': ['usmNoAuthProtocol', 'usmNoPrivProtocol']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.1 | ospf3AreaInfoIndex | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.2 | ospf3AreaInfoId | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.4 | ospf3TotalNumberOfInterfaces | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.5 | ospf3NumberOfInterfacesUp | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.6 | ospf3AreaInfoSPF | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.7 | ospf3NumberOfLsdbEntries | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.8 | ospf3AreaInfoAreaBorderRouter | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.9 | ospf3AreaInfoASBoundaryRouter | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.10 | ospf3AreaInfoNeighborsFULLstate | 0 | 0 | |
| 1.3.6.1.4.1.26543.2.7.4.3.3.18.2.1.11 | ospf3AreaInfoVirtNeighborsFULLstate | 0 | 0 |