OID reference

portAdminState

1.3.6.1.4.1.266.20.3.1.1.4

Description

A value indicating the current state of the port. A SET to this object enables (2) or disables (3) the port. The possible values returned by GET are: allwaysEnable(1) The port is always enabled (usually the uplink port). enable(2) The port is active to transmit or receive data. disable(3) The port is inactive and unab…

Full description and source information

Identification

Identifier and names

Parent
1.3.6.1.4.1.266.20.3.1.1 (bmSwitchPortEntry)
Node code
4
Node name
portAdminState
Category
SNMP management object
Numeric OID
1.3.6.1.4.1.266.20.3.1.1.4
URN notation
urn:oid:1.3.6.1.4.1.266.20.3.1.1.4
ASN.1, OID-IRI and named path variants
ASN.1 notation

{1 3 6 1 4 1 266 20 3 1 1 4}

  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) ldap-enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) org(3) dod(6) internet(1) private(4) vendor-objects(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) enterprises(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) ldap-enterprise(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
  • {iso(1) iso-organization(3) dod(6) internet(1) private(4) vendor-objects(1) nexansANS(266) bmSwitchMIB(20) bmSwitchPort(3) bmSwitchPortTable(1) bmSwitchPortEntry(1) portAdminState(4)}
OID-IRI notation
  • /1/3/6/1/4/1/266/20/3/1/1/4
  • /ISO/Identified-Organization/6/1/4/1/266/20/3/1/1/4
  • /ISO/3/6/1/4/1/266/20/3/1/1/4
Named path variants
  • /iso/identified-organization/dod/internet/private/enterprise/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/identified-organization/dod/internet/private/enterprise/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/identified-organization/dod/internet/private/enterprises/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/identified-organization/dod/internet/private/enterprises/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/identified-organization/dod/internet/private/ldap-enterprise/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/identified-organization/dod/internet/private/vendor-objects/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/identified-organization/dod/internet/private/vendor-objects/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/enterprise/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/enterprise/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/enterprises/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/enterprises/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/ldap-enterprise/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/ldap-enterprise/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/vendor-objects/266/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • /iso/org/dod/internet/private/vendor-objects/nexansANS/bmSwitchMIB/bmSwitchPort/bmSwitchPortTable/bmSwitchPortEntry/portAdminState
  • Additional combinations skipped.

SNMP properties

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Definitions may combine these properties differently.

Compare 2 source variants

Variant 1 — Netdisco MIB archive copies

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Variant 2 — Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)

Value type
INTEGER
Maximum access defined by MIB
read-write
Status in MIB
current

Enumerated values

Numbers refer to source variants above. Each value is shown only for variants that define it.

ValueNameSource variants
1allwaysEnable1, 2
2enable1, 2
3adminDisable1, 2
4securityDisable1, 2
5loopDisable1, 2
6bpduDisable1, 2
7udldDisable1, 2
8linkFlapDisable1, 2
9errorCountDisable1, 2
10sfpErrorDisable1, 2
11redundanyLoopDisable1, 2
12dhcpSnoopingDisable2

Using this OID with SNMP

At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.

In NEXANS-BM-MIB, the row index portIndex is declared as Integer32. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.266.20.3.1.1.4.<portIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.

Published row index: portIndex.

snmpwalk [connection options] DEVICE .1.3.6.1.4.1.266.20.3.1.1.4

Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.

Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.

Available source records contain 2 distinct definitions; some records may not include a definition.

Show 2 published definitions

portAdminState · current

portAdminState OBJECT-TYPE
	SYNTAX      INTEGER {
			allwaysEnable		(1),
			enable			(2),
			adminDisable		(3),
			securityDisable		(4),
			loopDisable		(5),
			bpduDisable		(6),
			udldDisable		(7),
			linkFlapDisable		(8),
			errorCountDisable	(9),
			sfpErrorDisable		(10),
			redundanyLoopDisable	(11)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"A value indicating the current state of the port.
		A SET to this object enables (2) or disables (3) the port.
			The possible values returned by GET are:
			allwaysEnable(1)
				The port is always enabled (usually the uplink port).
			enable(2)
				The port is active to transmit or receive data.
			disable(3)
				The port is inactive and unable to transmit or receive data.
			securityDisable(4)
				The port has been automatically disabled because of security 
				violation.
			loopDisable(5)
				The port has been automatically disabled because of the
				active loop protection.
			bpduDisable(6)
				The port has been automatically disabled because a BPDU has been 
				received on a Spanning Tree disabled port.
			udldDisable(7)
				The port has been automatically disabled because of the
				UDLD function.
			linkFlapDisable(8)
				The port has been automatically disabled because of the
				link flap protection.
			errorCountDisable(9)
				The port has been automatically disabled because of the
				error counter incrementation detection.
			sfpErrorDisable(10)
				The port has been automatically disabled because of wromg
				SFP inserted or SFP malfunction.
			redundanyLoopDisable(11)
				The port has been automatically disabled because of loop
				detection while spannung tree was enabled"
	::= { bmSwitchPortEntry 4 }

portAdminState · current

portAdminState OBJECT-TYPE
	SYNTAX      INTEGER {
			allwaysEnable		(1),
			enable			(2),
			adminDisable		(3),
			securityDisable		(4),
			loopDisable		(5),
			bpduDisable		(6),
			udldDisable		(7),
			linkFlapDisable		(8),
			errorCountDisable	(9),
			sfpErrorDisable		(10),
			redundanyLoopDisable	(11),
			dhcpSnoopingDisable	(12)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
		"A value indicating the current state of the port.
		A SET to this object enables (2) or disables (3) the port.
			The possible values returned by GET are:
			allwaysEnable(1)
				The port is always enabled (usually the uplink port).
			enable(2)
				The port is active to transmit or receive data.
			disable(3)
				The port is inactive and unable to transmit or receive data.
			securityDisable(4)
				The port has been automatically disabled because of security 
				violation.
			loopDisable(5)
				The port has been automatically disabled because of the
				active loop protection.
			bpduDisable(6)
				The port has been automatically disabled because a BPDU has been 
				received on a Spanning Tree disabled port.
			udldDisable(7)
				The port has been automatically disabled because of the
				UDLD function.
			linkFlapDisable(8)
				The port has been automatically disabled because of the
				link flap protection.
			errorCountDisable(9)
				The port has been automatically disabled because of the
				error counter incrementation detection.
			sfpErrorDisable(10)
				The port has been automatically disabled because of wromg
				SFP inserted or SFP malfunction.
			redundanyLoopDisable(11)
				The port has been automatically disabled because of loop
				detection while spannung tree was enabled"
	::= { bmSwitchPortEntry 4 }

Meaning

Descriptions

1 unique

Identical descriptions are grouped. Different wording and device-specific notes are retained.

A value indicating the current state of the port. A SET to this object enables (2) or disables (3) the port. The possible values returned by GET are: allwaysEnable(1) The port is always enabled (usually the uplink port). enable(2) The port is active to transmit or receive data. disable(3) The port is inactive and unable to transmit or receive data. securityDisable(4) The port has been automatically disabled because of security violation. loopDisable(5) The port has been automatically disabled because of the active loop protection. bpduDisable(6) The port has been automatically disabled because a BPDU has been received on a Spanning Tree disabled port. udldDisable(7) The port has been automatically disabled because of the UDLD function. linkFlapDisable(8) The port has been automatically disabled because of the link flap protection. errorCountDisable(9) The port has been automatically disabled because of the error counter incrementation detection. sfpErrorDisable(10) The port has been automatically disabled because of wromg SFP inserted or SFP malfunction. redundanyLoopDisable(11) The port has been automatically disabled because of loop detection while spannung tree was enabled

Sources for this description

Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)Netdisco MIB archive copies

See 2 matching source records

Evidence

Source records

2 records

Matching descriptions are grouped; open a group to compare definitions and supporting files.

Records for description 1Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community), Netdisco MIB archive copies2 records · 2 sources

Description 1

portAdminState · currentNetdisco MIB archive copies1 source

Status in source: current.

Names: portAdminState

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "portAdminState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "allwaysEnable",
    "(",
    "1",
    ")",
    ",",
    "enable",
    "(",
    "2",
    ")",
    ",",
    "adminDisable",
    "(",
    "3",
    ")",
    ",",
    "securityDisable",
    "(",
    "4",
    ")",
    ",",
    "loopDisable",
    "(",
    "5",
    ")",
    ",",
    "bpduDisable",
    "(",
    "6",
    ")",
    ",",
    "udldDisable",
    "(",
    "7",
    ")",
    ",",
    "linkFlapDisable",
    "(",
    "8",
    ")",
    ",",
    "errorCountDisable",
    "(",
    "9",
    ")",
    ",",
    "sfpErrorDisable",
    "(",
    "10",
    ")",
    ",",
    "redundanyLoopDisable",
    "(",
    "11",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A value indicating the current state of the port. A SET to this object enables (2) or disables (3) the port. The possible values returned by GET are: allwaysEnable(1) The port is always enabled (usually the uplink port). enable(2) The port is active to transmit or receive data. disable(3) The port is inactive and unable to transmit or receive data. securityDisable(4) The port has been automatically disabled because of security violation. loopDisable(5) The port has been automatically disabled because of the active loop protection. bpduDisable(6) The port has been automatically disabled because a BPDU has been received on a Spanning Tree disabled port. udldDisable(7) The port has been automatically disabled because of the UDLD function. linkFlapDisable(8) The port has been automatically disabled because of the link flap protection. errorCountDisable(9) The port has been automatically disabled because of the error counter incrementation detection. sfpErrorDisable(10) The port has been automatically disabled because of wromg SFP inserted or SFP malfunction. redundanyLoopDisable(11) The port has been automatically disabled because of loop detection while spannung tree was enabled\"",
    "::=",
    "{",
    "bmSwitchPortEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "allwaysEnable",
            1
          ],
          [
            "enable",
            2
          ],
          [
            "adminDisable",
            3
          ],
          [
            "securityDisable",
            4
          ],
          [
            "loopDisable",
            5
          ],
          [
            "bpduDisable",
            6
          ],
          [
            "udldDisable",
            7
          ],
          [
            "linkFlapDisable",
            8
          ],
          [
            "errorCountDisable",
            9
          ],
          [
            "sfpErrorDisable",
            10
          ],
          [
            "redundanyLoopDisable",
            11
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A value indicating the current state of the port. A SET to this object enables (2) or disables (3) the port. The possible values returned by GET are: allwaysEnable(1) The port is always enabled (usually the uplink port). enable(2) The port is active to transmit or receive data. disable(3) The port is inactive and unable to transmit or receive data. securityDisable(4) The port has been automatically disabled because of security violation. loopDisable(5) The port has been automatically disabled because of the active loop protection. bpduDisable(6) The port has been automatically disabled because a BPDU has been received on a Spanning Tree disabled port. udldDisable(7) The port has been automatically disabled because of the UDLD function. linkFlapDisable(8) The port has been automatically disabled because of the link flap protection. errorCountDisable(9) The port has been automatically disabled because of the error counter incrementation detection. sfpErrorDisable(10) The port has been automatically disabled because of wromg SFP inserted or SFP malfunction. redundanyLoopDisable(11) The port has been automatically disabled because of loop detection while spannung tree was enabled"
    ],
    null,
    null,
    null,
    null
  ]
}
portAdminState · currentMultiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)1 source

Status in source: current.

Names: portAdminState

Technical details
{
  "smi_kind": "OBJECT-TYPE",
  "definition": [
    "portAdminState",
    "OBJECT-TYPE",
    "SYNTAX",
    "INTEGER",
    "{",
    "allwaysEnable",
    "(",
    "1",
    ")",
    ",",
    "enable",
    "(",
    "2",
    ")",
    ",",
    "adminDisable",
    "(",
    "3",
    ")",
    ",",
    "securityDisable",
    "(",
    "4",
    ")",
    ",",
    "loopDisable",
    "(",
    "5",
    ")",
    ",",
    "bpduDisable",
    "(",
    "6",
    ")",
    ",",
    "udldDisable",
    "(",
    "7",
    ")",
    ",",
    "linkFlapDisable",
    "(",
    "8",
    ")",
    ",",
    "errorCountDisable",
    "(",
    "9",
    ")",
    ",",
    "sfpErrorDisable",
    "(",
    "10",
    ")",
    ",",
    "redundanyLoopDisable",
    "(",
    "11",
    ")",
    ",",
    "dhcpSnoopingDisable",
    "(",
    "12",
    ")",
    "}",
    "MAX-ACCESS",
    "read-write",
    "STATUS",
    "current",
    "DESCRIPTION",
    "\"A value indicating the current state of the port. A SET to this object enables (2) or disables (3) the port. The possible values returned by GET are: allwaysEnable(1) The port is always enabled (usually the uplink port). enable(2) The port is active to transmit or receive data. disable(3) The port is inactive and unable to transmit or receive data. securityDisable(4) The port has been automatically disabled because of security violation. loopDisable(5) The port has been automatically disabled because of the active loop protection. bpduDisable(6) The port has been automatically disabled because a BPDU has been received on a Spanning Tree disabled port. udldDisable(7) The port has been automatically disabled because of the UDLD function. linkFlapDisable(8) The port has been automatically disabled because of the link flap protection. errorCountDisable(9) The port has been automatically disabled because of the error counter incrementation detection. sfpErrorDisable(10) The port has been automatically disabled because of wromg SFP inserted or SFP malfunction. redundanyLoopDisable(11) The port has been automatically disabled because of loop detection while spannung tree was enabled\"",
    "::=",
    "{",
    "bmSwitchPortEntry",
    "4",
    "}"
  ],
  "syntax_tree": [
    [
      "SimpleSyntax",
      "INTEGER",
      [
        "enumSpec",
        [
          [
            "allwaysEnable",
            1
          ],
          [
            "enable",
            2
          ],
          [
            "adminDisable",
            3
          ],
          [
            "securityDisable",
            4
          ],
          [
            "loopDisable",
            5
          ],
          [
            "bpduDisable",
            6
          ],
          [
            "udldDisable",
            7
          ],
          [
            "linkFlapDisable",
            8
          ],
          [
            "errorCountDisable",
            9
          ],
          [
            "sfpErrorDisable",
            10
          ],
          [
            "redundanyLoopDisable",
            11
          ],
          [
            "dhcpSnoopingDisable",
            12
          ]
        ]
      ]
    ],
    null,
    [
      "MaxAccessPart",
      "read-write"
    ],
    [
      "Status",
      "current"
    ],
    [
      "DESCRIPTION",
      "A value indicating the current state of the port. A SET to this object enables (2) or disables (3) the port. The possible values returned by GET are: allwaysEnable(1) The port is always enabled (usually the uplink port). enable(2) The port is active to transmit or receive data. disable(3) The port is inactive and unable to transmit or receive data. securityDisable(4) The port has been automatically disabled because of security violation. loopDisable(5) The port has been automatically disabled because of the active loop protection. bpduDisable(6) The port has been automatically disabled because a BPDU has been received on a Spanning Tree disabled port. udldDisable(7) The port has been automatically disabled because of the UDLD function. linkFlapDisable(8) The port has been automatically disabled because of the link flap protection. errorCountDisable(9) The port has been automatically disabled because of the error counter incrementation detection. sfpErrorDisable(10) The port has been automatically disabled because of wromg SFP inserted or SFP malfunction. redundanyLoopDisable(11) The port has been automatically disabled because of loop detection while spannung tree was enabled"
    ],
    null,
    null,
    null,
    null
  ]
}

Registration

Registration authorities

First Registration Authority (inferred from ancestor 1.3.6.1.4.1.266)

Theissen Hubert

Siblings (33)

OIDNameDirect childrenDescendantsDescription
1.3.6.1.4.1.266.20.3.1.1.1 portIndex00
1.3.6.1.4.1.266.20.3.1.1.2 portDescr00
1.3.6.1.4.1.266.20.3.1.1.3 portName00
1.3.6.1.4.1.266.20.3.1.1.5 portSpeedDuplexSetup00
1.3.6.1.4.1.266.20.3.1.1.6 portLinkState00
1.3.6.1.4.1.266.20.3.1.1.7 portErrorCounter00
1.3.6.1.4.1.266.20.3.1.1.8 portRemoteFault00
1.3.6.1.4.1.266.20.3.1.1.9 portDefaultVlanId00
1.3.6.1.4.1.266.20.3.1.1.10 portTrunkingMode00
1.3.6.1.4.1.266.20.3.1.1.11 portDot1qDefaultPrioValue00
1.3.6.1.4.1.266.20.3.1.1.12 portDefaultPrioQueue00
1.3.6.1.4.1.266.20.3.1.1.13 portLEDGreen00
1.3.6.1.4.1.266.20.3.1.1.14 portLEDYellow00
1.3.6.1.4.1.266.20.3.1.1.15 portBandwidthLimitRxd00
1.3.6.1.4.1.266.20.3.1.1.16 portBandwidthLimitTxd00
1.3.6.1.4.1.266.20.3.1.1.17 portSecurityAdminState00
1.3.6.1.4.1.266.20.3.1.1.18 portSecurityMacAddr100
1.3.6.1.4.1.266.20.3.1.1.19 portSecurityMacAddr200
1.3.6.1.4.1.266.20.3.1.1.20 portSecurityMacAddr300
1.3.6.1.4.1.266.20.3.1.1.21 portPoeAdminState00
1.3.6.1.4.1.266.20.3.1.1.22 portPoeVoltage00
1.3.6.1.4.1.266.20.3.1.1.23 portPoeCurrent00
1.3.6.1.4.1.266.20.3.1.1.24 portPoePower00
1.3.6.1.4.1.266.20.3.1.1.25 portSecurityForwardingState00
1.3.6.1.4.1.266.20.3.1.1.26 portPoePowerLimit00
1.3.6.1.4.1.266.20.3.1.1.27 portLimiterPacketType00
1.3.6.1.4.1.266.20.3.1.1.28 portAcApSetup00
1.3.6.1.4.1.266.20.3.1.1.29 portLinkType00
1.3.6.1.4.1.266.20.3.1.1.30 portVoiceVlanId00
1.3.6.1.4.1.266.20.3.1.1.31 portPrioDot1p00
1.3.6.1.4.1.266.20.3.1.1.32 portPrioIp00
1.3.6.1.4.1.266.20.3.1.1.33 portActiveDefaultVlanId00
1.3.6.1.4.1.266.20.3.1.1.34 portActiveVoiceVlanId00