OID reference
1.3.6.1.4.1.272.4.16.10.1.27
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
Identification
{1 3 6 1 4 1 272 4 16 10 1 27}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In BIANCA-BRICK-ATM2-MIB, the row index atmIfIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.272.4.16.10.1.27.<atmIfIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.272.4.16.10.1.27
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
atmIfInDiscards OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet could be to
free up buffer space."
::= { atmIfEntry 27 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: mandatory.
Names: atmIfInDiscards
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"atmIfInDiscards",
"OBJECT-TYPE",
"SYNTAX",
"Counter",
"ACCESS",
"read-only",
"STATUS",
"mandatory",
"DESCRIPTION",
"\"The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space.\"",
"::=",
"{",
"atmIfEntry",
"27",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter"
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"mandatory"
],
[
"DESCRIPTION",
"The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: BIANCA-BRICK-ATM2-MIB
See published definition above
{'RFC-1212': ['OBJECT-TYPE'], 'RFC1155-SMI': ['IpAddress', 'Counter', 'Gauge', 'TimeTicks', 'enterprises'], 'RFC1158-MIB': ['DisplayString'], 'RFC1213-MIB': ['PhysAddress']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.16.10.1.1 | atmIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.2 | atmIfType | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.3 | atmIfDescr | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.4 | atmIfAdminStatus | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.5 | atmIfOperStatus | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.6 | atmIfLastChange | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.7 | atmIfMaxTxRate | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.8 | atmIfOperMode | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.22 | atmIfInPkts | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.23 | atmIfOutPkts | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.24 | atmIfRxSpeed | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.25 | atmIfTxSpeed | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.26 | atmIfInOctets | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.28 | atmIfInErrors | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.29 | atmIfOutOctets | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.30 | atmIfOutDiscards | 0 | 0 | |
| 1.3.6.1.4.1.272.4.16.10.1.31 | atmIfOutErrors | 0 | 0 |