OID reference
1.3.6.1.4.1.272.4.45.1.1.9
This bitfield describes what modes the port supports: half-10 : 10Mbit/s half duplex full-10 : 10Mbit/s full duplex half-100 : 100Mbit/s half duplex full-100 : 100Mbit/s full duplex half-1000 : 1000Mbit/s half duplex full-1000 : 1000Mbit/s full duplex autoneg : Autonegotiation supported .
Identification
{1 3 6 1 4 1 272 4 45 1 1 9}
| Bit position | Name |
|---|---|
| 0 | half-10 |
| 1 | full-10 |
| 2 | half-100 |
| 3 | full-100 |
| 4 | half-1000 |
| 5 | full-1000 |
| 6 | autoneg |
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In BIANCA-ETH-PHY-MIB, the row index ethPhyPortIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.272.4.45.1.1.9.<ethPhyPortIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.272.4.45.1.1.9
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
ethPhyPortCapabilities OBJECT-TYPE
SYNTAX BITS {
half-10(0),
full-10(1),
half-100(2),
full-100(3),
half-1000(4),
full-1000(5),
autoneg(6)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This bitfield describes what modes the port supports:
half-10 : 10Mbit/s half duplex
full-10 : 10Mbit/s full duplex
half-100 : 100Mbit/s half duplex
full-100 : 100Mbit/s full duplex
half-1000 : 1000Mbit/s half duplex
full-1000 : 1000Mbit/s full duplex
autoneg : Autonegotiation supported
."
::= { ethPhyEntry 9 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
This bitfield describes what modes the port supports: half-10 : 10Mbit/s half duplex full-10 : 10Mbit/s full duplex half-100 : 100Mbit/s half duplex full-100 : 100Mbit/s full duplex half-1000 : 1000Mbit/s half duplex full-1000 : 1000Mbit/s full duplex autoneg : Autonegotiation supported .
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: ethPhyPortCapabilities
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"ethPhyPortCapabilities",
"OBJECT-TYPE",
"SYNTAX",
"BITS",
"{",
"half-10",
"(",
"0",
")",
",",
"full-10",
"(",
"1",
")",
",",
"half-100",
"(",
"2",
")",
",",
"full-100",
"(",
"3",
")",
",",
"half-1000",
"(",
"4",
")",
",",
"full-1000",
"(",
"5",
")",
",",
"autoneg",
"(",
"6",
")",
"}",
"MAX-ACCESS",
"read-only",
"STATUS",
"current",
"DESCRIPTION",
"\"This bitfield describes what modes the port supports: half-10 : 10Mbit/s half duplex full-10 : 10Mbit/s full duplex half-100 : 100Mbit/s half duplex full-100 : 100Mbit/s full duplex half-1000 : 1000Mbit/s half duplex full-1000 : 1000Mbit/s full duplex autoneg : Autonegotiation supported .\"",
"::=",
"{",
"ethPhyEntry",
"9",
"}"
],
"syntax_tree": [
[
"BITS",
[
[
"half-10",
0
],
[
"full-10",
1
],
[
"half-100",
2
],
[
"full-100",
3
],
[
"half-1000",
4
],
[
"full-1000",
5
],
[
"autoneg",
6
]
]
],
null,
[
"MaxAccessPart",
"read-only"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"This bitfield describes what modes the port supports: half-10 : 10Mbit/s half duplex full-10 : 10Mbit/s full duplex half-100 : 100Mbit/s half duplex full-100 : 100Mbit/s full duplex half-1000 : 1000Mbit/s half duplex full-1000 : 1000Mbit/s full duplex autoneg : Autonegotiation supported ."
],
null,
null,
null,
null
]
}Vendor MIB copy from the Observium Community archive.
Module: BIANCA-ETH-PHY-MIB
See published definition above
{'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['DisplayString', 'TimeStamp', 'PhysAddress', 'TruthValue'], 'BINTEC-MIB': ['phy', 'Date', 'HexValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Integer32', 'Unsigned32', 'Counter32', 'Gauge32', 'Counter64', 'IpAddress', 'TimeTicks', 'mib-2', 'enterprises']}Related source files and packages:
Registration
| OID | Name | Direct children | Descendants | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272.4.45.1.1.1 | ethPhyPortIndex | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.2 | ethPhyChipVendor | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.3 | ethPhyChipModel | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.6 | ethPhyPortLinkStatus | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.7 | ethPhyPortMdixStatus | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.10 | ethPhyPortMode | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.12 | ethPhyEthAssignedIfIndex | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.13 | ethPhyExtendedDistance | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.18 | ethPhyPortGroup | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.21 | ethPhyPortDescr | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.22 | ethPhyPortFlowControl | 0 | 0 | |
| 1.3.6.1.4.1.272.4.45.1.1.23 | ethPhyPortFlowControlStatus | 0 | 0 |