OID reference
1.3.6.1.4.1.272.4.46.1.1.27
Number of times associated STAs are polled for presence. If the STA fails to respond to wlanIfStaMaxPolls consecutive polls, it will be forcefully disassociated and removed from wlanStationTable.
Identification
{1 3 6 1 4 1 272 4 46 1 1 27}
A counter is cumulative. To estimate a rate, subtract two readings and divide by the elapsed time; use the units stated in the MIB.
Counter values can wrap or reset. A decrease alone does not distinguish a wrap from a reset, and multiple wraps between readings cannot be recovered reliably. Check the device's discontinuity indicators when available.
Published counter width: 32 bits. SMIv2: Counter32 · Counter64
At least one MIB declaration places this object in a table row. A value belongs to a row instance; its suffix depends on the row's INDEX or AUGMENTS definition.
In BIANCA-BRICK-WIRELESS-MIB, the row index wlanIfIndex is declared as INTEGER. A non-negative index value is encoded as one numeric subidentifier. An instance has the form .1.3.6.1.4.1.272.4.46.1.1.27.<wlanIfIndex>. Use an index value actually present on the device and permitted by its MIB. Other definitions can differ.
snmpwalk [connection options] DEVICE .1.3.6.1.4.1.272.4.46.1.1.27
Replace the placeholders with your connection and authentication options. Available permissions and device support can differ from the MIB.
Properties come from available MIB definitions. Actual device support and access can differ. See source records below for original files and qualifications.
The displayed source records contain one distinct definition. Compare its source records.
wlanIfStaMaxPolls OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Number of times associated STAs are polled for presence.
If the STA fails to respond to wlanIfStaMaxPolls
consecutive polls, it will be forcefully disassociated
and removed from wlanStationTable."
DEFVAL { 3 }
::= { wlanIfEntry 27 }
Meaning
Identical descriptions are grouped. Different wording and device-specific notes are retained.
Number of times associated STAs are polled for presence. If the STA fails to respond to wlanIfStaMaxPolls consecutive polls, it will be forcefully disassociated and removed from wlanStationTable.
Multiple manufacturers; see the original MIB MIB copies (LibreNMS/Observium Community)
Evidence
Matching descriptions are grouped; open a group to compare definitions and supporting files.
Status in source: current.
Names: wlanIfStaMaxPolls
{
"smi_kind": "OBJECT-TYPE",
"definition": [
"wlanIfStaMaxPolls",
"OBJECT-TYPE",
"SYNTAX",
"Counter32",
"MAX-ACCESS",
"read-write",
"STATUS",
"current",
"DESCRIPTION",
"\"Number of times associated STAs are polled for presence. If the STA fails to respond to wlanIfStaMaxPolls consecutive polls, it will be forcefully disassociated and removed from wlanStationTable.\"",
"DEFVAL",
"{",
"3",
"}",
"::=",
"{",
"wlanIfEntry",
"27",
"}"
],
"syntax_tree": [
[
"ApplicationSyntax",
"Counter32"
],
null,
[
"MaxAccessPart",
"read-write"
],
[
"Status",
"current"
],
[
"DESCRIPTION",
"Number of times associated STAs are polled for presence. If the STA fails to respond to wlanIfStaMaxPolls consecutive polls, it will be forcefully disassociated and removed from wlanStationTable."
],
null,
null,
null,
[
"DEFVAL",
3
]
]
}Vendor MIB copy from the Observium Community archive.
Module: BIANCA-BRICK-WIRELESS-MIB
See published definition above
{'IF-MIB': ['ifIndex'], 'RFC-1212': ['OBJECT-TYPE'], 'RFC-1215': ['TRAP-TYPE'], 'SNMPv2-TC': ['MacAddress', 'DisplayString', 'TruthValue', 'RowStatus'], 'BINTEC-MIB': ['bibo', 'wlan', 'BitValue', 'Date', 'HexValue'], 'SNMPv2-SMI': ['MODULE-IDENTITY', 'OBJECT-TYPE', 'NOTIFICATION-TYPE', 'Counter32', 'Counter64', 'TimeTicks', 'Unsigned32'], 'RFC1155-SMI': ['IpAddress', 'enterprises'], 'SNMPv2-CONF': ['MODULE-COMPLIANCE', 'OBJECT-GROUP', 'NOTIFICATION-GROUP']}Related source files and packages:
Registration